Quality Control Analysts
SOC 19-4099 · O*NET 19-4099.01
Quality control analysts test raw materials, bulk intermediates, and finished products using standard methods, compare results with specifications and control limits and propose release recommendations, and also calibrate and maintain equipment, record data, write deviation reports, and take part in out-of-specification investigations. This page uses the precise US O*NET occupation 19-4099.01; the US wages and employment projections only go up to the BLS SOC 19-4099 "other life, physical, and social science technicians" broad category and are not a dedicated 19-4099.01 value, so the two cannot be substituted for each other. For China no verifiable precise occupational wage was obtained, and the insufficient-evidence marker is retained.
Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((25+25+75)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.
Quick judgment
What kind of person is suited to being a quality control analyst?
Quality control analyst work involves product samples, instrument status, and recording responsibility at the same time; first verify the target position's test items, method version, shift protection, and release authority, then decide whether to continue exploring.
Save the sample log-in table, equipment log, raw data, and deviation records, and record the specification version and escalation reasons behind each judgment; a single paper sample performance cannot be turned into a fit score.
Who is more likely to fit Quality Control Analysts?
Willing to test batch by batch using established methods, record abnormalities truthfully, proactively stop using equipment or data that is unreliable and escalate, and accept that release decisions are made by authorized roles. The paper exercises are for exploration and do not prove analytical qualifications or real testing performance.
When should you be cautious about choosing Quality Control Analysts?
Signals requiring caution: recording only by sample number without verifying receipt status and the chain of custody, treating a single instrument reading as the conclusion, skipping verification of the specification and control limit version, or explaining results and release decisions externally on behalf of the laboratory without authorization.
How can a small experiment test your fit for Quality Control Analysts?
Under 09 “Entry, qualifications, and career development,” try “QC-L01 | Can these lab records support release?” Build a four-row results table and record test conditions, open investigation items, and your recommendation.
Career profile
Quality control analysts test raw materials, bulk intermediates, and finished products to determine quality, possibly including stability sample testing; they also calibrate and maintain equipment, complete records, write deviation reports, and take part in out-of-specification investigations. This page uses O*NET 19-4099.01; the US wages and projections only go up to the BLS SOC 19-4099 broad category and do not represent a dedicated 19-4099.01 value or all Chinese positions with the same name.
What are the main categories of quality control analyst work?
Quality control analyst work can be understood in three respects: testing and judgment, equipment and records, and deviations and release recommendations. Analysts test and judge conformity using established methods; equipment status and original records determine whether results are usable, and whether to release is approved by an authorized role rather than decided by the tester.
Testing and decisions:
Test raw materials, intermediates, and finished products using established methods and give a judgment after comparing results with specifications and control limits.
- 01Verify method
- 02take sample
- 03measure data
- 04check specifications
- 05judge result
- 06record conclusion
Equipment and records:
Instrument calibration status, equipment logs, and original records determine whether data can be used for judgment and release, and if one is missing the evidence must be supplemented first.
- 01Check calibration
- 02log
- 03store original records
- 04verify version
- 05verify deviations
- 06propose recommendations
How do quality control analysts and chemical technicians differ?
The main column is 19-4099.01 quality control analysts and the second column is 19-4031 chemical technicians; the former emphasizes conformity judgment by specification and release recommendations, while the latter's experiments and analysis can serve research, development, or production. Specific work can overlap, and methods, review, and approval authority must all be verified by position.
| Dimension | Primary track | Comparison track |
|---|---|---|
| Core purpose | Test materials and products using established methods, compare specifications and control limits, and propose release recommendations. | Conduct chemical or physical experiments and analysis to assist research, development, quality control, or production. |
| Main object and basis | Raw materials, intermediates, finished products, and stability samples; based on methods, specifications, and control limits. | Experimental samples, chemicals, and laboratory apparatus; based on the specific experimental protocol and methods. |
| Core process | Test, recalculate, and verify instrument status, compare specifications, and record results and questionable items. | Prepare experiments and apparatus, perform analysis, organize results, and report problems. |
| Main outputs | Original test records, equipment logs, deviation reports, and release recommendations. | Experimental data, analysis reports, and apparatus or sample records. |
| Responsible party | Analysts are responsible for approved testing and records, while review and final release follow the organizational authorization division of labor. | Technicians undertake experimental tasks according to the actual position, and project and professional reviewers confirm according to their duties. |
| Authority and approval | Proposing a recommendation is not the same as approving release; methods, data use, and signing authority are verified separately. | Laboratory skills do not automatically grant product release, method approval, or other position qualifications. |
| Conclusion boundaries | The tasks are 19-4099.01; wages and projections come from the broader 19-4099 and do not represent a standalone occupational wage. | Belongs to 19-4031 chemical technicians, and shared laboratory skills still require verifying the target object and method. |
Core responsibilities
- 01Testing and judgment · Test using established methods and specifications
Perform routine and non-routine analyses on in-process materials, raw materials, environmental samples, finished products, or stability samples and compare results with specifications and control limits.
- 02Equipment and calibration · Calibrate, verify, and maintain equipment
Instrument status determines whether data is usable, and calibration and maintenance must be recorded and faults eliminated.
- 03Records and data · Complete data sheets, equipment logs, and inventory tables
Retain original records and versions, compile data, and perform the corresponding analysis.
- 04Abnormalities and investigation · Report questionable results and take part in out-of-specification investigations
Identify quality problems, propose solutions, and recommend corrective actions.
- 05Methods and procedures · Write or revise standard operating procedures
Perform method validation or transfer per policy and evaluate and improve analytical methods.
- 06Collaboration and training · Train other analysts and serve as technical liaison
Serve as the technical liaison for quality control with other departments, suppliers, or contractors.
What must be checked item by item before starting?
Before starting, verify the test object and product type, method and specification versions, instrument and equipment conditions, recording and data systems, release authorization division of labor, shift and protection requirements, training and continuing education arrangements, and the position's qualification and experience threshold.
- 01
Test objects and items
Which products and samples are tested, and do they include microbiological, physicochemical, or stability items?
- 02
Method and specification versions
Which standard methods and specification versions are used, and who is responsible for method confirmation and transfer?
- 03
Instrument and equipment conditions
Who is responsible for instrument calibration intervals, maintenance responsibility, and fault handling?
- 04
Records and data systems
How are original records, equipment logs, and data systems stored, reviewed, and traced?
- 05
Release and authorization division of labor
Who submits release recommendations and who has approval authority? Who handles and closes out-of-specification results and deviations?
- 06
Working conditions and training
What exactly are the shift, protective equipment, hazardous condition exposure, and training requirements?
Career direction comparison
How do the work directions of quality control analysts compare with adjacent occupations?
The following six rows compare adjacent occupations' objects, core outputs, and knowledge requiring separate verification, and do not presume the same occupation from both being in a laboratory or sharing equipment.
| Career direction | Core work and output | Key differences | Best-fit choice |
|---|---|---|---|
| Calibration technologist and technician | Calibrate, adjust, and maintain measuring instruments, and issue calibration records and traceability conclusions. | The object is metrological traceability and instrument calibration; quality control analysts use calibrated instruments for product judgment, and the metrological responsibility of calibration itself is usually borne by a calibration position or an external body. | If you prefer studying quantities, calibration methods, and measurement uncertainty, you can compare this direction; metrology knowledge and calibration record requirements must still be added. |
| Chemical technician | Perform chemical analysis, sample preparation, and experimental records according to methods. | The focus is chemical experimentation and analytical operations; quality control analysts emphasize specification-based judgment, release recommendations, and deviation investigation, and method development responsibility also differs. | If you prefer experimental operations and sample preparation, you can explore chemical technician tasks; first verify the specific methods and safety requirements. |
| Chemist | Design, develop, and validate analytical methods, interpret results, and write research reports. | Chemists undertake method development, research, and result interpretation; quality control analysts focus on established methods and specifications, and method development authority and responsibility differ. | If you are willing to do method development and data interpretation, you can verify the chemist direction; it usually requires the corresponding education and method development experience. |
| Food science technician | Perform testing, process collaboration, and quality records in food processing settings. | The object is food processing and food quality collaboration; food science technicians also need to understand processing technology and food safety requirements, and pharmaceutical testing requirements cannot be applied directly. | If you are interested in food processing and food safety, you can explore this direction; industry-specific standards and regulations must be verified separately. |
| Industrial engineering technologist and technician | Analyze processes, work hours, and workstation layout to support efficiency and quality improvement projects. | The focus is processes, work hours, and human-machine efficiency; quality control analysts focus on product conformity and nonconformance judgment, so the improvement object differs. | If you prefer process efficiency and workstation improvement, you can verify the industrial engineering direction; process experience does not automatically mean quality judgment authority. |
| Quality control systems manager | Maintain the quality management system, organize internal audits, track deviation trends, and arrange personnel training. | Managers are responsible for systems, audits, and management; analysts undertake specific testing and judgment, and analytical experience does not automatically mean system management or audit qualifications. | If you prefer designing systems, organizing audits, and training, you can verify the management direction; it usually requires additional system and personnel management experience. |
How to choose
It is suggested to first compare the target position posting item by item against test objects, method responsibility, authorization division of labor, and qualification requirements, then pick one gap as an evidence sample. E1–E5 only illustrate quality control verification methods and cannot replace experience in an adjacent field.
Adjacent occupations share laboratory record, equipment, and data handling experience but do not share qualifications, authorization, or responsibility; when comparing, the target position's actual duties and authorization govern.
AI impact on this career
Will AI replace quality control analysts?
Insufficient evidence: the cross-occupational potential exposure, task research, employer expectations, and official occupational data consulted this time do not provide the site AI adoption rate, layoff rate, or position disappearance year for quality control analysts. Data retrieval and draft organization can be an editorial trial proposal, but whether it is adopted, whether it improves accuracy, and how judgment responsibility is borne must be verified in a specific process. AI Impact Score 42% is an editorial estimate. Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((25+25+75)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.The three tasks, ratings and sources are listed in the FermatMind method source record on this page.
AI assessment method and sources
FermatMind AI Impact Score estimation method v1
FermatMind / 费马测试 · 2026-10-18
- Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((25+25+75)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.
- Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
- Testing and judgment | Test using established methods and specifications | Perform routine and non-routine analyses on in-process materials, raw materials, environmental samples, finished products, or stability samples and compare results with specifications and control limits. — 25/100; weight=1/3
- Equipment and calibration | Calibrate, verify, and maintain equipment | Instrument status determines whether data is usable, and calibration and maintenance must be recorded and faults eliminated. — 25/100; weight=1/3
- Records and data | Complete data sheets, equipment logs, and inventory tables | Retain original records and versions, compile data, and perform the corresponding analysis. — 75/100; weight=1/3
Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.
Which testing and decision tasks can AI assist with?
First define the task: data aggregation, specification comparison, deviation organization, or record verification. The following are editorial trial approaches; generating text does not mean completing judgment, approving release, or bearing quality responsibility.
Which links will actually be adopted?
Insufficient evidence: the research consulted this time does not provide the site AI adoption rate for this occupation. Before adoption, verify organizational permission, data purpose, system authority, and verifiable output.
Will AI reduce quality control analyst positions?
Insufficient evidence: this time the AI layoff rate or causal wage outcome for this occupation has not been verified. Technology potential, efficiency change, and employment projections cannot substitute for one another.
Task impact matrix
| Work area | Task | Current change | Human control point |
|---|---|---|---|
| Method management | Draft method and specification documents | Retrieval and consolidation of existing method clauses may be trialed, outputting differences pending verification; methods are not published automatically. | Confirm method applicability, specification version, and the person approving release. |
| Testing and decisions | Test data compared against specifications | Data extraction and flagging of out-of-limit and unknown items may be trialed; pass or fail is decided by a person. | Check the sample batch, specification limits, and method version. |
| Data checking | Value recalculation and unit checking | Organizing the calculation process and outliers may be trialed; formulas and conclusions are recalculated by a person. | Recalculate values and units, and do not treat the instrument reading as the only basis. |
| Record management | Original record and version checking | Field and version differences may be flagged on a trial basis; generated explanations cannot serve as a decision or a compliance conclusion. | Check the original record, version, and reviewer. |
| Exception management | Deviation and out-of-specification investigation records | Organizing the sequence of events and open questions may be trialed; disposition and external communication are decided by a person. | Check retained samples, investigation responsibility, and corrective actions. |
| Personnel and training | Training and method execution feedback | Consolidating error types and training checklists may be trialed; the responsible person verifies the records and communicates with the team. | Compare against actual records and the organization's assessment rules; do not evaluate a person on the basis of an AI summary. |
| Reporting and trends | Trend analysis and quality reporting | Organizing data and assumptions may be trialed, citing the source text and checking the data; conclusions that do not exist must not be generated. | Distinguish raw data, analytical conclusions, and inferences that are not yet verified. |
Why does employment evidence reach different conclusions?
Potential task exposure, employer expectations, occupational projections, and actual adoption measure different objects. The following materials provide their own background and give no site efficiency, adoption, or layoff figures for this occupation on this basis.
ILO 2025 update
View source ↗- Subject
- Cross-occupational potential generative AI task exposure.
- Finding
- Updates the exposure assessment with task data and expert/AI input, providing potential impact background.
- Limitation
- Potential exposure is not actual adoption or employment loss, and the occupation's proportion cannot be filled in from global background.
GPTs are GPTs(2023)
View source ↗- Subject
- The match between US occupational tasks and language model capabilities.
- Finding
- Estimates task impact potential by combining human and GPT-4 classification and cannot be treated as a site adoption measurement.
- Limitation
- The research does not predict development or adoption timing and is not equal to efficiency, accuracy, or wage outcomes for this occupation.
WEF Future of Jobs Report 2025
View source ↗- Subject
- The report covers employer expectations about employment and skill changes.
- Finding
- Describes future expectations and trend background and does not replace independent measurement for this occupation.
- Limitation
- Employer expectations are not realized position changes and cannot yield outcomes for this occupation.
NIST AI RMF 1.0
View source ↗- Subject
- Risk management background for organizational AI use.
- Finding
- Supports tool review with governance, identification, measurement, and risk management approaches.
- Limitation
- A general voluntary framework does not provide adoption rates or statutory authorization for this occupation.
O*NET 19-4099.01
View source ↗- Subject
- Testing, judgment, equipment, records, deviation, and training tasks.
- Finding
- Analysts must execute according to methods and specifications, and beyond data organization there is still judgment and recording responsibility.
- Limitation
- Official task descriptions do not measure AI adoption and do not grant unified signing or release authority.
Why does impact differ by work direction?
The following separates editorial trial proposals by testing and judgment, equipment and calibration, and deviations and records. Task needs differ, and document organization effects cannot be directly extended to accurate judgment, release approval, or real quality improvement.
Testing and decisions
AI primarily changesA trial tool can aggregate test data and specification differences and output a comparison to be reviewed.
Human responsibility remainsConfirm the method version, specifications, and control limits, and let an authorized role decide nonconformity and not let the draft directly become a release conclusion.
Equipment and calibration
AI primarily changesA trial tool can extract calibration due dates, maintenance records, and equipment log differences to form a checklist.
Human responsibility remainsVerify the actual instrument status and calibration interval, and stop use and escalate on abnormalities; the judgment of data usability is not handed to the tool.
Deviation and records
AI primarily changesA trial tool can merge deviation and out-of-specification records, the sequence of events, and questions to answer.
Human responsibility remainsVerify original records, retained samples, and the investigation responsibility division of labor; the investigation report and corrective actions are confirmed by the lead.
Accountability must remain intact when AI enters professional workflows
The following quality control tool trial chain is a verification sequence proposed by the editors and references general risk management approaches; it is not a statutory testing procedure. Testing, review, and release roles are determined by real organizational authorization.
- Confirming requirements and boundaries
Confirm the sample and test items, method version, specifications and control limits, instrument status, remaining sample volume, and authority; list the missing conditions before deciding whether to send them to an approved tool.
- Scope of tool handling
Use only approved data and systems and require original text locations and versions to be retained; test conditions that are not provided cannot be automatically filled in as confirmed facts.
- Manual review
Manually recalculate values, units, and the direction of specification comparison, verify instrument calibration status and the new version, then submit to the reviewer or authorized role for confirmation.
- Record keeping
Save original records, inputs, tool versions, drafts, review differences, and confirmation records so the successor can trace the judgment.
- Authorization and responsibility
An analyst submitting a recommendation is not the same as holding release authority; judgment and external commitments follow organizational rules and generated drafts cannot replace the responsible person.
Professional risks of using AI
Draft content treated as confirmed fact
A draft may omit out-of-specification results, expired instruments, or unknown items, and adopting it directly changes the basis for judgment.
Control: Locate the original records and latest confirmation item by item, list unknown conditions separately, and do not write them as conforming without human and authorized confirmation.
Samples and test data entering unapproved tools
Sample information, test data, and client data may exceed the tool's approved scope, and sending them out loses control over use.
Control: First verify organizational authorization and the permitted use of the materials and limit the input scope; when it cannot be confirmed, ask the responsible role, and do not substitute general tool permission for organizational approval.
Tool version and output not traceable
Without a retained version there is no way to explain why a decision changed or why retesting was required.
Control: Retain original records, outputs, and the basis for changes, and make the draft status and the reviewer explicit.
Wrong testing units, limit direction, and instrument status
Missing units, specification direction, or instrument status leads to wrong decisions.
Control: Recalculate values and the direction of the specification comparison, and check calibration status and version; do not fill unknown items with zero, and let the authorized person decide on exceptions.
Missing review leaving responsibility unclear
Mixing AI summaries with actual records can leave review, release, and exception handover without a basis.
Control: Identify who confirms the draft, the method, the decision, and the release, and retain evidence item by item; do not write anything as complete before confirmation is obtained.
How should different audiences respond?
Those preparing to enter laboratory quality work
First understand methods, specifications, and control limits, then use fictional materials to review a test record; tool organization cannot replace the analyst's verification of data and abnormalities.
Laboratory testing and recording personnel
Record how the tool extracts data and deviations, retain original records and unknowns, and submit complete evidence to the lead; do not treat a generated summary as a judgment conclusion.
Quality control leads and reviewers
Choose an approved scenario to compare manual records with tool output, record omissions and recalculation errors, and determine who confirms methods, specifications, and release; do not infer efficiency or layoffs from a demonstration.
Technical liaison and method management personnel
Verify the source and approved use of method documents, specification versions, and training materials; write unconfirmed information as items to be verified and do not publish conclusions externally.
Common questions about AI and career development
Will quality control analysts be replaced by AI?
Potential task exposure research cannot be used to conclude that this whole occupation will be replaced. Testing and judgment include specification verification, instrument status, abnormality judgment, and authorization requirements, and actual change depends on organizational adoption and verification.
Source: ILO 2025 exposure research; O*NET 19-4099.01 tasks.Original source ↗
Do I need to be able to write code to enter the field now?
This page has no basis for setting a unified programming threshold. First learn method execution, specification judgment, recording, and deviation handling; which systems or data skills are needed depends on the target position and laboratory process.
Source: O*NET task and tool background; editorial learning suggestions.Original source ↗
Which tasks are most exposed to AI?
This page does not rank task replacement probabilities. You can first try data aggregation, specification comparison, and deviation merging, and check omissions, values, versions, and authority against the original records; these are editorial trial choices.
Source: GPTs are GPTs task potential analysis; editorial trial suggestions.Original source ↗
Will this occupation shrink by 2035?
BLS 2025–2035 projects the 19-4099 broad category to grow 4.4%, a net increase of about 3,900, with about 11,200 annual openings including replacements. Projected growth cannot prove any specific AI adoption or employment causal effect.
Source: BLS 2025–2035 employment projections table 19-4099 row.Original source ↗
Can AI confirm that testing passes or approve release?
Tool output does not automatically obtain judgment or release authority. Organizations should clarify the authority of people and systems, confirmation records, and exception handling; this page does not provide Chinese legal opinion, and the fictional exercise approval rules apply only to the prompt.
Source: NIST general risk approach; editorial release authorization verification suggestions.Original source ↗
In which year will this position disappear?
Insufficient evidence: the materials consulted this time do not provide a disappearance year for this occupation, and this page does not derive or fill in a time.
Source: GPTs are GPTs does not predict adoption timing; ILO potential exposure boundaries.Original source ↗
What should I learn first now?
First practice method execution, specification judgment, original record and equipment log verification, and deviation report writing; then observe tool omissions in approved scenarios and save the draft and revision basis.
Source: O*NET quality control tasks; editorial exercises and learning suggestions.Original source ↗
This page gives verifiable quality control tasks and an editorial trial plan; first check original records, specification versions, instrument status, and organizational authorization, and only then discuss tool uses. When there is no evidence on adoption, layoffs, or wage effects for this occupation, the gap is retained.
Chinese mainland salary reference
A Chinese position with the same name should have its test items, method version, instruments, and release authorization checked, and the name alone does not map to US wages or statutory qualifications.
Chemical inspection technicians (6-31-03-01) overlap with laboratory QC in sample preparation, instrumental analysis, and records. Check separately who investigates deviations, recommends release, or authorizes it.
Evidence status of mainland China quality control analyst wages
Insufficient evidence: no current Chinese job posting pay sample was obtained whose duties, test items, and authorization scope match and whose status has been verified. Typical US education does not automatically match Chinese postings.
National scope
Exact occupation wage not obtained
Specific city
City occupational distribution not obtained
Specific employer and testing scope
Check pay, hours, and duties against the current posting
In which position directions do quality control analysts usually start with different education backgrounds?
Coverage boundary of Chinese wage materials
| Education background | Common position directions | Notes and checking suggestions |
|---|---|---|
| Junior college (testing, chemical engineering, or biology major) | Laboratory testing and quality record execution role | Check whether a specific position accepts this education combination; first build verifiable testing and record experience, and do not promise release or management roles on the basis of education. |
| Bachelor's degree background (chemistry, biology, food science, pharmacy, etc.) | Testing analysis, method execution, and deviation handling | O*NET Job Zone 3 and a BLS associate degree are the typical US background; Chinese requirements follow the target posting, and a degree does not automatically confer release approval authority. |
| Graduate or specialized analytical background | Method development, validation, and data interpretation | May take on method validation or technical documentation work; whether one can serve as the responsible person still depends on work experience and position confirmation, and a degree is not a guarantee of promotion. |
| Laboratory or production quality staff from other industries | Exploring quality control analysis duties | Check the test items, method version, instruments, and record requirements; a past title does not prove the ability to take on this position directly or to hold release authority. |
In this round the National Bureau of Statistics 2025 urban unit wage materials were reviewed, and no Chinese national or city wage or current posting sample matching this occupation's duties was obtained.
Which industries and directions use this occupation?
Pharmaceutical and biological product manufacturing
Perform physicochemical and microbiological testing on raw and auxiliary materials, intermediates, and finished products and assess conformity with specifications; the editorial suggestion is to check the product category and regulatory requirements, and no Chinese demand figures are projected.
Food and agricultural product processing
Perform testing and record-keeping under food safety standards; industry-specific standards and test methods must be checked separately.
Third-party testing and R&D services
Perform testing under the commissioned method and issue reports; the scope of accreditation, method confirmation, and data ownership must be checked.
Will AI affect the wages of quality control analysts?
Insufficient evidence: no quantitative evidence that AI adoption changes wages for Chinese quality control analysts was obtained. Document retrieval or data organization can be trialed in specific scenarios, but pay increase ratios cannot be projected, and adoption cannot be treated as directly causing wage changes.
US pay reference
US 19-4099 category wage reference (quality control analyst is not listed separately)
In BLS May 2025 OEWS the annual wage median for the 19-4099 category is 62,280 US dollars, with 4.4% projected growth in 2025—2035. This is a category statistic, not the 19-4099.01 detailed occupation, and OEWS employment of 73,910 must not be mixed with the 89,500 projection base.
US wage distribution
| Statistical position of the wage | Annual wage reference | Conversion boundaries | How to understand this position |
|---|---|---|---|
| Lowest 10% | Below 39,000 US dollars per year | Official annual wage, not personal monthly income | The lowest 10% wage is below 39,000 US dollars per year, which indicates a distribution position rather than an entry-level wage line; the value belongs to the 19-4099 category. |
| Median (50%) | 62,280 US dollars per year | Official annual wage, not personal take-home pay | 62,280 US dollars per year is the median of the 19-4099 category distribution, and individual or new-hire income cannot be determined from it. |
| Highest 10% | Above 102,690 US dollars per year | Official annual wage, not personal take-home pay | The highest 10% wage is above 102,690 US dollars per year, which does not correspond to a uniform job grade or guaranteed promotion income. |
Pay · 10th percentile:Below 39,000 US dollars per year;May 2025 the lowest 10% wage for the 19-4099 category is below this value, which is the lower end of the distribution, not an entry-level starting wage.;BLS May 2025 OEWS 19-4099
Pay · 25th percentile:48,030 US dollars per year;May 2025 the 25th percentile annual wage for the 19-4099 category, a statistical distribution position rather than a seniority level.;BLS May 2025 OEWS 19-4099
Pay · median:62,280 US dollars per year;May 2025 the annual wage median for the 19-4099 category, meaning the midpoint of the distribution and not the income of an individual or a new hire.;BLS May 2025 OEWS 19-4099
Pay · 75th percentile:79,780 US dollars per year;May 2025 the 75th percentile annual wage for the 19-4099 category; being above this position does not indicate a certain seniority or managerial grade.;BLS May 2025 OEWS 19-4099
Pay · 90th percentile:Above 102,690 US dollars per year;May 2025 the highest 10% wage for the 19-4099 category is above this value; high percentiles need to be read together with industry, region, and authorization scope.;BLS May 2025 OEWS 19-4099
How should this set of US wage figures be understood?
Is the median an entry-level wage?
The median is the midpoint of the wage distribution for the broader 19-4099 category, not an entry-level offer. The EP associate degree description is also a category-level background and cannot be used to conclude that all 19-4099.01 analyst positions share a uniform requirement.
Can hourly pay be used to project individual annual income?
Individual annual income requires checking contractual hours, shifts, allowances, and taxes and fees; this page cites official annual wage statistics and does not mechanically convert hourly pay into personal take-home income.
Which statistical program do these figures come from?
Wages use the BLS May 2025 OEWS 19-4099 category, and projections use the EP2025—2035 row for that category; O*NET currently also lists 2025 employment and 2025—2035, which still cannot be treated as the 19-4099.01 detailed occupation.
Which conditions affect actual income?
Actual income requires checking test items, region, authorization scope, hours, experience, and contract terms; official industry differences do not prove the income effect of any single factor.
How much do US wages differ across industries?
| Industry | Annual wage median / statistical status | How to understand this value |
|---|---|---|
| Scientific research and development services | 64,730 US dollars per year | May 2025 the annual wage median for the 19-4099 category in this industry; industry differences do not constitute a causal effect on individual income or a job offer. |
| Testing laboratories and services | Insufficient evidence: no 19-4099 median wage for this industry was obtained in this round | Industry-specific estimates require querying each industry, and this round could not obtain this industry's value because of the public data interface's daily access limit; the category median is not substituted. |
| Pharmaceutical and medicine manufacturing | Insufficient evidence: no 19-4099 median wage for this industry was obtained in this round | This industry is a common employer of quality control analysts, but this round did not obtain a separate median for it; the review scope and the gap are retained. |
| Navigational, measuring, electromedical, and control instruments manufacturing | Insufficient evidence: no 19-4099 median wage for this industry was obtained in this round | This industry is also a common employer; the missing industry value is not replaced by the 19-4099 category median or values from other industries. |
Which factors affect US quality control analyst wages?
Year and definition
The US 19-4099 category May 2025 annual wage median is 62,280 US dollars, with 4.4% projected growth in 2025—2035.
Industry and job conditions
The official industry table provides industry-specific medians and cannot control for test items, region, experience, or authorization scope.
Pay unit and individual conditions
62,280 US dollars is the May 2025 US category annual wage median, not a starting salary, after-tax monthly pay, or Chinese income; the employment projection covers a different period.
US employment outlook
Employment · employment size
89,500 people (2025 base year, 19-4099)BLS employment projections table, 19-4099 category, 2025 base year 8.95 ten-thousand people; OEWS May 2025 survey employment is 73,910 people, and the two belong to different programs with different periods and definitions.;BLS 2025—2035 occupational projections and characteristics table
Employment · growth rate
4.4%(2025—2035,19-4099)Official net change is about 3,900 people; net increase, growth rate, and annual average openings are three different measures.;BLS 2025—2035 occupational projections and characteristics table
Employment · annual average job openings
About 11,200 job openings per year on average (19-4099)Annual average openings in 2025—2035 include growth and replacement needs and are not equal to net annual additions or current recruitment volume.;BLS 2025—2035 occupational projections and characteristics table
Career fit guide
Which interests, abilities, and ways of working matter more for a quality control analyst?
This occupation places more value on following methods, recording exceptions truthfully, stopping use and escalating when equipment or data are unreliable, and accepting that release is decided by an authorized role. Interest and personality tools can help raise questions but cannot replace task verification.
You may be better suited to: Willing to check data batch by batch per method, record exceptions truthfully, and accept that release is decided by an authorized role.
These situations call for caution: Drawing conclusions from a single demonstration or assessment, skipping instrument status and version checks, or treating a generated summary as the basis for a decision.
Try an entry exercise: Use E1—E5 to review a set of test records and write a release recommendation, compare it with the reference deliverable, and note the items you missed.
Do not let one test decide your career
Holland occupational interest model (RIASEC)
Based on the official O*NET 19-4099.01 interest code CIR; interest codes describe occupational characteristics, not an individual's test score.Which Holland type is closer to a quality control analyst?
The O*NET interest code is CIR: Conventional strongest, then Investigative and Realistic. This indicates that the occupation more often involves procedural recording and checking, data analysis, and instrument operation, but it does not predict individual performance and is not a hiring standard.
- Checking data batch by batch against methods and specifications
- Willing to record exceptions and escalate per procedure
Do not use it this way: Interest codes cannot replace verification through real tasks; judging fit from a single test result ignores method training, instrument operation, and record responsibility.
Test my Holland occupational interestsFive-factor personality model (Big Five)
O*NET work styles and work context provide behavioral background; this page did not measure Big Five dimensions for this occupation.Which Big Five traits are more relevant to this work?
This page does not give a best personality type. The occupation more often requires conscientiousness-related behavior: following methods, deciding against specifications, and recording exceptions truthfully; this is an editorial summary, not a hiring threshold or a personality conclusion.
- Persistently following methods and rechecking values
- Recording exceptions and unknown conditions truthfully
Do not use it this way: This page did not verify a model in which Big Five scores predict testing accuracy or performance in this exact occupation; individual method training, record quality, and position authorization must be checked separately, and scores cannot determine hiring.
See my Big Five personality traitsMyers-Briggs Type Indicator (MBTI)
MBTI is a popular type tool; this page does not cite it as evidence of occupational fit.Can MBTI be used to judge whether I am suited to being a quality control analyst?
MBTI is not used to judge suitability for this occupation. The occupation requires following procedures, keeping records independently, and collaborative communication, which are work behaviors that can be observed through training, not type preferences.
- Able to repeat work consistently under a specified method
- Willing to communicate exceptions with production, R&D, and suppliers
Do not use it this way: Type labels cannot predict record accuracy or decision-making ability; do not use MBTI results to decide whether to apply or to hire.
Understand my MBTI preferencesEnneagram
The Enneagram lacks occupational measurement evidence for this occupation; the related notes are editorial suggestions.Can the Enneagram tell me whether I am suited to this occupation?
The Enneagram is not used as a basis for occupational fit. What is more worth observing in this occupation is whether, when facing exceptions and pressure, one can record per procedure, stop using suspect data, and report upward.
- In an exception, preserve evidence before reporting
- Following procedures even under time pressure
Do not use it this way: Do not use type membership to explain or predict an individual's performance in the laboratory.
Explore my Enneagram patternIntelligence quotient (IQ) and mathematical reasoning
O*NET tasks include analyzing data and applying mathematical or statistical methods; this page sets no score threshold.If I am not good at math, can I be a quality control analyst?
The occupational sources and job sample here do not list an IQ score. Check each employer’s requirements. Use the exercise to observe how you check numbers, document findings, and hand them off.
- Able to recalculate values and check units
- Able to judge the direction of specification upper and lower limits
Do not use it this way: A mathematical reasoning score cannot replace actual checking ability; if you have long avoided numerical work, first observe yourself through paper-based practice.
Understand my intelligence and reasoning performanceEmotional intelligence (EI, often called "EQ")
O*NET work context shows that daily face-to-face discussions and email are relatively common; the relationship between emotional intelligence measurement and job performance is not cited as evidence on this page.Does being a quality control analyst require high emotional intelligence?
More relevant to this occupation is communication and collaboration: explaining deviations to production or R&D, checking data with suppliers or contract laboratories, and escalating promptly when uncertain. These are work behaviors, not emotional intelligence scores.
- Able to explain deviations and pending items clearly
- Retaining records and escalating even amid conflict
Do not use it this way: A high or low emotional intelligence score does not determine competence in this occupation; attributing communication problems simply to personal traits conceals process and authorization problems.
Understand my emotional intelligence abilitiesWhich adjacent occupations can be explored further?
Instrument calibration and measurement values direction
Fits better when: Likes studying instrument status, calibration cycles, and measurement consistency.
Watch for: Still needs metrology knowledge and calibration methods; instrument operation experience does not equal the ability to calibrate independently.
Explore related career: Calibration technologist and technicianChemical laboratory operation direction
Fits better when: Willing to do sample preparation and perform laboratory operations per method.
Watch for: Needs to build up the chemical principles and safety requirements of different test methods.
Explore related career: Chemical technicianMethod development and research interpretation direction
Fits better when: Willing to design methods, interpret data, and write technical documents.
Watch for: Usually requires the relevant degree and method development experience; not to be confused with a testing execution role.
Explore related career: ChemistFood processing and food safety direction
Fits better when: Interested in food processing technology and food safety standards.
Watch for: Industry-specific standards and regulations must be checked separately, and pharmaceutical requirements cannot be applied.
Explore related career: Food science technicianProcess and efficiency improvement direction
Fits better when: More willing to analyze processes, work hours, and workstation improvements.
Watch for: The improvement target differs; process experience does not automatically equal authority to make quality decisions.
Explore related career: Industrial engineering technologist and technicianQuality system and management direction
Fits better when: Willing to design systems, organize audits, and manage personnel training.
Watch for: Usually requires system and personnel management experience; analytical experience does not equal management qualification.
Explore related career: Quality control systems managerCareer fit questions
What kind of personality is more suited to being a quality control analyst?
This page gives no personality conclusion. What can be observed is whether one can repeat work per method, record exceptions truthfully, and escalate when uncertain; these behaviors say more about fit than personality labels.
Are introverts suited to being quality control analysts?
Neither introversion nor extraversion is a threshold. The occupation involves independent testing and recording as well as daily face-to-face discussions and email communication; the key is to explain results, exceptions, and pending items clearly.
Can extroverts do quality control analyst work well?
Yes. Testing decisions require communication with production, R&D, suppliers, and reviewers; willingness to clarify and escalate matters more than the degree of extraversion.
Which MBTI type is most suitable for a quality control analyst?
There is no most suitable MBTI type. MBTI is not used to judge fit for this occupation and is not a basis for hiring or assessment.
Which Holland type is more suitable for this occupation?
The O*NET interest code is CIR (Conventional strongest). It describes occupational characteristics and does not predict individual performance; use E1—E5 to verify actual task performance.
Can personality trait scores predict job performance in this occupation?
This page obtained no occupation-specific personality model that can predict individual testing accuracy, record quality, or exception handling; no score threshold is set, and observation relies on specific tasks and ongoing records.
Can I be a quality control analyst if I am not good at math?
First observe whether you can recalculate values and check units and specification upper and lower limits, then add the corresponding methods. Which mathematical or statistical abilities the test items require must be checked against the method and the position, and it cannot be said across the board that the mathematical demands are low or that assessment scores determine placement.
Does being a quality control analyst require high emotional intelligence?
The communication more relevant to this occupation is explaining deviations, checking data, and escalating promptly, not an emotional intelligence score; attributing communication problems entirely to personal traits conceals process responsibility.
Can the Enneagram be used to judge whether I am suited?
The Enneagram is not used as a basis for fit. If you want to understand your reactions under exceptions and pressure, use records from real tasks rather than type labels.
How do I use deliverables to judge which direction suits me?
Compare the deliverables of three directions: test records and decisions, calibration or equipment logs, and deviation or out-of-specification investigation records. Work through each of them with E1—E5 and see which one you are more willing to keep investing in.
Work pressure, risks, and career boundaries
What pressures, risks, and career boundaries does the work of a quality control analyst have?
Risks worth checking item by item in testing tasks include sample identification, instrument status, specification direction, original records, and authorization. The following risk scenarios are constructed editorially, and no data support the frequency of risks or a ranking of the most common pressures.
The risk basis comes from O*NET 19-4099.01 tasks and work context (US self-reported basis) and the editorially designed E1—E5 materials; it contains no accident rates, penalties, or health diagnosis data.
Errors in sample identification and chain of custody
Typical scenario:Trace each sample ID to the original batch record. Hold the result for review when the relationship is unclear.
Roles most affected:Sample receiving, retention, and testing staff
Possible consequence:Results cannot be traced back to the correct sample, the basis for the decision and release is invalidated, and resampling and retesting are required.
How to reduce risk:Register item by item by number, batch, and chain of custody, and leave a trail at handover; if identification is unclear, isolate and report first, and do not test beforehand.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
Expired or unclear instrument calibration
Typical scenario:If the test date conflicts with the calibration window, retain the reading and log. Ask the authorized reviewer to assess its use under the procedure.
Roles most affected:Instrument use and maintenance staff
Possible consequence:Data obtained from an instrument past its calibration date or under repair cannot be used for a decision; the instrument must be recalibrated and the test repeated.
How to reduce risk:Before testing, check the calibration expiry date and the status label and record the equipment log; if abnormal, stop use and escalate, and do not produce data first.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
Improper handling of out-of-specification results and deviations
Typical scenario:For a result outside a stated limit, preserve the raw record, document investigation status, and escalate to the authorized role. Section 09 supplies fictional data to review.
Roles most affected:Testing, review, and deviation investigation staff
Possible consequence:An out-of-specification result is treated as ordinary data and released, and non-compliant product may move to the next stage.
How to reduce risk:Judge it as non-conforming against the specification and start an out-of-specification investigation, retain the raw data and the retained samples, and let an authorized role decide the disposition.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
Untraceable original records and versions
Typical scenario:Another editorially fictional scenario: a draft report cites one version of the specification while the original record uses another, and the version difference has not yet been clarified. This is a supplementary example of record risk, not a fact given by E1—E5.
Roles most affected:Records, data management, and review staff
Possible consequence:Missing versions and original records make it impossible to reconstruct the basis for a decision, and traceability and audits cannot be completed.
How to reduce risk:Retain raw data, instrument output, and the specification version, note revisions and the reviewer, and ensure traceability.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
Exceeding decision and release authorization
Typical scenario:Record draft and approval status separately. Investigate out-of-specification results or missing evidence under the procedure.
Roles most affected:Analysts and quality control managers
Possible consequence:An unauthorized person declares release on their own, breaking the approval chain and the allocation of responsibility.
How to reduce risk:Analysts submit only decision recommendations and evidence; release is approved and documented by a role authorized by the organization.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
External sharing of test data and customer materials
Typical scenario:The other party asks for the entire batch of original records together with the customer names, but that material is not approved for external release.
Roles most affected:External communication and technical liaison staff
Possible consequence:Providing test data or customer materials beyond the authorized scope may violate contract and compliance requirements.
How to reduce risk:First check organizational authorization and the contract terms, provide only data within the approved scope, and keep a trail per procedure.
Evidence:O*NET 19-4099.01 tasks and work context · O*NET 19-4099.01 testing record and documentation tasks
Entry, qualifications, and career development
How to become a quality control analyst? Education, qualifications, and career development paths
Entry usually starts with sample receiving, testing support, or production site quality records, working under supervision per method; the verifiable abilities are original records, value recalculation, and exception reporting. O*NET Job Zone 3 and a BLS associate degree are the typical US background, while Chinese requirements follow the target posting.
How new graduates or career changers can verify and get started
How do the entry-level positions and initial tasks of quality control analysts compare?
| Career direction | Starting tasks and outputs | Evidence you can prepare | How to demonstrate it without experience | Boundary of duties and authority |
|---|---|---|---|---|
| Laboratory sample receiving and log-in | Receive and register sample numbers, batches, and status, maintain handover and retention records, and isolate and report when identification is unclear. | Whether the sample information is registered completely and the handover items are written clearly, and whether the basis can be explained when questioned. | Use the sample log-in sheet and the equipment log in E1—E2 to explain your own practice, and note which information was still unclear at the time. | Leans toward records and flow, without responsibility for testing decisions and release; the boundary of authority is set by the laboratory position authorization. |
| Laboratory testing assistant and junior analyst | Perform testing under supervision per the established method, record raw data, and compare the results with specifications and control limits. | Whether the test record can be completed per the method steps, values recalculated, and exceptions recorded truthfully. | Use the raw data and the deviation record in E3—E4 to explain the checking process and point out the instrument status problem. | Executes the established method and does not take on method development or release approval; decision conclusions are confirmed by the reviewing role. |
| Production site quality record role | Record sampling, testing, and retention information by batch, and track the closure status of non-conformities and deviations. | Whether batch records can be matched to test results and the destination of deviations explained. | Use the deviation record in E4 to explain how to register and track them, marking unclosed items. | Responsible for site records and tracking, while testing methods and decision responsibility may rest with the laboratory. |
| Microbiological or physicochemical testing role | Perform microbiological or physicochemical testing per method, handle media, reagents, and sample preparation, and record environmental and equipment conditions. | Whether the testing conditions, the control setup, and exception handling can be explained. | Use the E3 data to explain the testing conditions and the basis for the judgment, and mark uncertain items. | The testing scope varies with product and regulation, and methods and limits cannot be applied across fields. |
| Third-party testing laboratory report support role | Organize test data and draft reports, and check the commissioned method, sample information, and report elements. | Whether report elements can be checked for consistency with the raw data and pending items listed. | Use the E1—E5 materials to prepare a report element comparison table, marking missing information. | Report signing and result interpretation are the responsibility of authorized personnel, and the support role does not take on the final conclusion. |
What do employers usually look at in recruitment?
Education and experience in recruitment requirements
The O*NET detailed occupation is Job Zone 3; the EP associate degree and None experience are typical US descriptions for the broader 19-4099 category and cannot be viewed as uniform requirements for all employers of the detailed analyst occupation or for China.
Akeso’s fall recruiting table lists a physicochemical QC analyst in Zhongshan and Guangzhou Huangpu, with pH and other product tests, chromatography equipment upkeep, and reports. The row lists a bachelor’s degree. The posting header does not establish pay for this role. The QC section of a Zhejiang Huishi Pharmaceutical QA/QC posting covers testing raw materials, intermediates, finished products and stability samples, reporting, and method validation. Its combined title does not establish analyst-only duties or pay.
Training and job-entry verification
O*NET Job Zone 3 describes occupations with medium preparation. Its examples are context. Check each laboratory’s experience and training requirements.
How to check: confirm the employer's training arrangements, the mentoring approach, and the authorized scope for taking up the position.
Interest and work context requirements
The O*NET interest code is CIR, and the work context shows that daily email and face-to-face discussions are relatively common, with 85% reporting accuracy as extremely important; all of these are on the US self-reported basis.
How to check: match the posting requirements to demonstrable checking and recording abilities.
Demonstrable test records
The editorial suggestion is to prepare sample log-in, raw data, and a decision recommendation for a fictional batch, and to mark the instrument status and specification version.
How to check: have someone else judge from the materials alone whether the basis for the decision is complete, rather than looking only at the conclusion.
QC-L01 | Can these lab records support release?
Fictional inputs
Use the records provided here.
E1 | Fictional lot L-2405. The intake log lists L-2405-01, 02, and 03, while the raw pH record says L-2405-08. Other records match the lot. E2 | The pH meter calibration was valid through May 31. The measurement was taken June 2. The assay, moisture, and microbiology equipment records show valid status on the test date.
E3 | Assay 98.6%, specification 95.0%–105.0%. Moisture 0.42%, limit 0.50%. pH 6.8, with no applicable limit supplied. Microbiology 1,200 CFU/g, limit 1,000. E4 | The microbiology result is logged and the investigation field is blank. E5 | The draft recommends release, with no authorized approval recorded.
Task and deliverable
Submit a four-row results table with each reading, its specification, and the instrument or sample status. Recommend a disposition and list the missing evidence.
List evidence gaps. Do not invent readings or approvals.
Before checking your work
Save your draft before checking the key after the seven-day plan.
You need no equipment, physical samples, or partner.
Authority boundaries
This is a paper exercise. Do not operate equipment, approve release, or restart production.
What verifiable work materials can be prepared when entering the field?
Scope and evidence sheet
Record the subject and scope from E1.
Verify against the supplied inputs.
Comparison record
Use E3 to make the comparison and show the denominator or limits.
Verify against the supplied inputs.
Exception handoff
Use E4 and E5 to record open items, the proposed disposition, and its owner.
Decision draft
Submit a four-row results table with each reading, its specification, and the instrument or sample status. Recommend a disposition and list the missing evidence.
What may be examined in an interview and probation period, and which conclusions cannot be inferred?
| Scenario | Possible check | Observable evidence | Boundaries |
|---|---|---|---|
| Check sample identification and status | Whether inconsistency between the number and the handover can be found | Identify the record, version, and scope. | A single employer's process cannot be generalized into a uniform industry requirement |
| Check instrument status | Whether an expired calibration can be identified | Explain whether the evidence supports a decision. | Equipment and calibration requirements vary with the laboratory system |
| Check specification and decision | Whether the direction of the upper and lower limits can be judged | Show the calculation or specification comparison. | Limits and methods vary with product and regulation |
| Check release authorization | Whether a recommendation can be distinguished from an approval | Name the disposition authority and reviewer. | The scope of authority is determined by the organization and cannot be carried over from assumptions made elsewhere |
Seven-day practice and self-check
- 01
Day 1
Read E1–E5 and identify records and authority.
- 02
Day 2
Record the subject and scope from E1.
- 03
Day 3
Check the status and evidence in E2.
- 04
Day 4
Use E3 to make the comparison and show the denominator or limits.
- 05
Day 5
Use E4 and E5 to record open items, the proposed disposition, and its owner.
- 06
Day 6
Finish and save your first draft with the evidence behind your judgments. No partner is required.
- 07
Day 7
After saving your day 6 draft, open “QC-L01 answer key and rubric (open on day 7)” in the FAQ. Apply the four rubric checks and record one revision and its reason.
Submission and review checklist
- Check whether each result traces to the sample and lot.
- Keep the test conditions, applicable limits, and open items for each row.
- Facts and choices: write verifiable facts (specification limits, calibration dates, test values) separately from editorial judgments, and the judgment conclusions must point back to the raw data.
- Exercise cost: about 30—60 minutes per day for the seven-day plan, mainly reading materials and recalculating, with no need to buy equipment or reagents.
- Material boundaries: E1—E5 are entirely fictional, cannot replace real testing, and cannot serve as a basis for reports.
- Reaction to feedback: when someone points out a missed item, record the specific location and reason rather than explaining why the conclusion is reasonable.
- Interest in the process: if checking and recording make you willing to go deeper, you can check the method and authorization requirements of the target position; if you keep avoiding numbers and records, reassess the direction.
Education, training, and qualifications: which are the real thresholds for this occupation?
| Qualification or training | Who it suits | Effect on the position | Whether it is a universal entry requirement | Conditions | Investment | Boundaries |
|---|---|---|---|---|---|---|
| Associate or bachelor's degree (chemistry, biology, food science, pharmacy, etc.) | Job seekers who want to enter laboratory testing positions | A common requirement of some employers, but it does not guarantee the right to sign off on tests or to release | This page did not verify that this study path is a uniform statutory threshold; the specific product, jurisdiction, and position conditions must be checked separately | Follow the admission requirements of the target school and major; foreign qualifications may require recognition | Check against the actual duration and cost of the specific course, program, or organizational training | A degree itself does not grant release, test signing, or method approval authority |
| Laboratory-related vocational training or courses | People who want to acquire basic operational skills first | Can help meet the entry requirements of operational positions but does not equal a qualification | This page did not verify that this study path is a uniform statutory threshold; the specific product, jurisdiction, and position conditions must be checked separately | Depends on the course arrangements and hands-on conditions; some courses require laboratory resources | Check against the actual duration and cost of the specific course, program, or organizational training | A training certificate does not replace organizational authorization and on-the-job assessment |
| Registered apprenticeship or mentored training | People who want to learn on the job and build records | O*NET shows that this occupation can use a registered apprenticeship path; the specific position varies with the employer | This page did not verify that this study path is a uniform statutory threshold; the specific product, jurisdiction, and position conditions must be checked separately | Depends on the project's recruitment conditions and quota; some projects require a basic education level | Check against the actual duration and cost of the specific course, program, or organizational training | Apprenticeship experience does not automatically equal a qualification recognized across organizations |
| Instrument- or method-specific training | People already working in a laboratory who need to operate specific instruments | Can improve operational ability with a specific method but does not change authorization or responsibility | This page did not verify that this study path is a uniform statutory threshold; the specific product, jurisdiction, and position conditions must be checked separately | Depends on vendor or institutional course requirements; some require an on-the-job reference | Check against the actual duration and cost of the specific course, program, or organizational training | Specialized training cannot replace method validation and decision responsibility |
| Internal organizational authorization and job qualification | People already employed who need to obtain authorization | Determines whether one can test independently, review, or submit release recommendations | Set by the organization's quality system and is an internal requirement | Based on the organization's training, assessment, and authorization records | Check against the actual duration and cost of the specific course, program, or organizational training | Internal authorization is valid only in this organization and is not generalized into an industry qualification |
| Practice or regulatory qualifications (such as those involving regulated products) | Positions involved when a product enters a regulated field | Set by the competent authority; the applicable jurisdiction and product category must be checked | Whether it is required depends on the product and jurisdiction and cannot be generalized | Follow the competent authority's conditions; certificate status and scope must be verified | Check against the actual duration and cost of the specific course, program, or organizational training | This page did not verify a uniform mandatory qualification in China; matters involving regulated fields must be confirmed separately |
Statement of qualification and authorization boundaries
Recruitment sample note
Sample testing and decision direction
Testing support
Typical scope:Complete sampling and routine testing under supervision per method, record raw data, and report exceptions.
Readiness evidence:Editorial suggestion: present complete original records and review traces, and be able to explain the basis for each judgment.
Credential boundary:Follow employer training and position authorization; this page sets no uniform qualification.
Next moves:First complete routine testing of the same sample batch independently, then try handling common equipment exceptions.
Independent testing analyst
Typical scope:Complete routine testing and value recalculation independently, and check the specification version and instrument status.
Readiness evidence:Editorial suggestion: be able to present test records with a complete decision basis and one deviation report.
Credential boundary:Internal organizational job authorization; ongoing training follows laboratory requirements.
Next moves:Participate in non-routine analysis and learn deviation and out-of-specification investigation methods.
Testing and investigation core staff
Typical scope:Take on non-routine analysis, participate in out-of-specification investigations, and write technical documents.
Readiness evidence:Editorial suggestion: be able to present complete investigation records and corrective action recommendations.
Credential boundary:Follow organizational system requirements; no uniform external certificate is set.
Next moves:Try method validation or transfer and take on mentoring of new staff.
Method owner (depending on the organization)
Typical scope:Lead method validation or transfer, train others, and serve as a technical liaison; release is still approved by an authorized role.
Readiness evidence:Editorial suggestion: be able to present method documents, validation records, and training records.
Credential boundary:Determined by organizational authorization and system requirements; this page does not promise a job grade.
Next moves:Move toward the quality system or adjacent technical directions, or deepen a specific product field.
Instrument calibration and equipment direction
Equipment and record support
Typical scope:Maintain the equipment log, register calibration and maintenance information, and report exceptions found.
Readiness evidence:Editorial suggestion: present complete records of the equipment log and the calibration ledger.
Credential boundary:Follow laboratory equipment management requirements.
Next moves:Learn instrument operation and calibration cycle management.
Instrument operation and maintenance
Typical scope:Operate instruments per procedure, perform routine maintenance, and handle common faults.
Readiness evidence:Editorial suggestion: be able to present maintenance records and one fault handling record.
Credential boundary:Vendor or institutional specialized training; does not constitute a metrology qualification.
Next moves:Participate in the calibration plan and intermediate checks.
Calibration coordination
Typical scope:Coordinate internal calibration and sending items out for calibration, and maintain calibration status and expiry reminders.
Readiness evidence:Editorial suggestion: be able to present the calibration plan, expiry reminders, and non-conformance handling records.
Credential boundary:Follow organizational and external body requirements.
Next moves:Learn measurement uncertainty and quantity traceability methods.
Metrology or equipment management lead (depending on the organization)
Typical scope:Develop equipment and calibration strategy, handle metrology exceptions, and train operators.
Readiness evidence:Editorial suggestion: be able to present equipment strategy documents and exception handling records.
Credential boundary:Determined by organizational and competent authority requirements.
Next moves:Develop toward calibration technology or equipment management.
Deviation investigation and quality system direction
Deviation record support
Typical scope:Register deviation and non-conformance information and track closure status.
Readiness evidence:Editorial suggestion: present the deviation ledger and tracking records.
Credential boundary:Training follows the organizational system.
Next moves:Learn deviation classification and root cause analysis methods.
Deviation investigation participation
Typical scope:Participate in out-of-specification and deviation investigations, and organize evidence and timelines.
Readiness evidence:Editorial suggestion: be able to present complete investigation records and an evidence index.
Credential boundary:Follow system requirements; no uniform external certificate is set.
Next moves:Participate in internal audits and trend analysis.
System documentation and audit support
Typical scope:Write or revise standard operating procedures and participate in internal assessments and audits.
Readiness evidence:Editorial suggestion: be able to present procedure documents and audit records.
Credential boundary:Follow organizational system and regulatory requirements.
Next moves:Take on training and the preparation of regulatory submission materials.
Quality system lead (depending on the organization)
Typical scope:Maintain the quality system, organize internal audits and personnel training, and manage deviation trends.
Readiness evidence:Editorial suggestion: be able to present system documents, internal audit reports, and training records.
Credential boundary:Determined by organizational and jurisdictional requirements; this page does not promise a job grade.
Next moves:Develop toward quality control system management or regulatory affairs.
Capability ladder: what demonstrates readiness?
- 01
Able to complete testing and records per method
Can complete testing under supervision per the established method and record truthfully, and will report exceptions found.
- 02
Able to complete routine testing independently and organize the basis for the decision
Can independently complete routine testing, recalculate values, and handle common equipment exceptions, and will check the specification version before deciding.
- 03
Able to participate in investigations and write technical documents
Can take on non-routine analysis, participate in deviation and out-of-specification investigations, and write technical documents.
- 04
Able to lead method work and technical liaison
Can lead method validation or transfer, train others, and serve as a technical liaison; release still follows organizational authorization.
Occupational outlook and moving to related occupations
What is the outlook for quality control analysts? Which related occupations can I move to?
The US SOC 19-4099 category is projected to grow 4.4% in 2025—2035, with a net increase of about 3,900 people and about 11,200 annual average openings; no exact Chinese employment or wage for this occupation was obtained, so the evidence gap is retained. Adjacent occupations allow exploration of calibration, chemical technology, food science, system management, and validation directions.
Three sources, three different measures
BLS 2025–2035 occupational projections and characteristics table
2025—2035United States · US 19-4099 "Other Life, Physical, and Social Science Technicians" category
Projected growth 4.4% in 2025—2035, net increase about 3,900, annual average openings about 11,200
Employment change rate and net increase
Employment growth rate and net increase are official projections, not promises.
Does not establish:SOC 19-4099 category, not the 19-4099.01 detailed occupation, and not a Chinese projection.
BLS May 2025 OEWS 19-4099 wages and employment
May 2025United States · US 19-4099 category
Median 62,280 US dollars per year; employment 73,910
Wage percentiles and employment size
A percentile is a distribution position, not a job grade line.
Does not establish:19-4099 category only; does not project individual income or Chinese wages.
National Bureau of Statistics 2025 urban unit wages
Statistics for 2025, released 2026-05Mainland China · Chinese urban unit industry basis, not a statistic for this occupation
Exact occupational wage for this occupation not obtained
Industry average wage (background)
Industry average wages serve only as statistical background.
Does not establish:Does not include the exact wage for this occupation; this page retains insufficient evidence.
Where can your current capabilities transfer?
These are capability relationships, not automatic promotions or credential waivers.
Calibration technologist and technician
Close: shares instrument and record experience, but metrology knowledge must be added.Transfers:Instrument operation, calibration concepts, and record habits
Build next:Metrology and measurement uncertainty, calibration methods, and record requirements
View career profileChemical technician
Close: shares laboratory work, but method principles must be added.Transfers:Laboratory operations, sample preparation, and method execution
Build next:Chemical principles of different test methods and sample preparation
View career profileChemist
Moderate: requires the relevant degree and method development experience.Transfers:Analyzing data and experimental records
Build next:Method development, study design, and result interpretation
View career profileFood science technician
Moderate: industry standards and regulations must be added.Transfers:Testing and quality records
Build next:Food processing technology and food safety standards
View career profileIndustrial engineering technologist and technician
Moderate: the object and goal differ, so process methods must be added.Transfers:Data and process records
Build next:Work hour analysis, process improvement, and ergonomics methods
View career profileQuality control systems manager
Distant: requires management experience and system methods.Transfers:Quality control tasks and deviation records
Build next:System design, internal audit, and personnel management
View career profileValidation engineer
Moderate to distant: requires engineering and validation methods.Transfers:Specifications, validation awareness, and documentation habits
Build next:Validation protocol design, process understanding, and engineering background
View career profileInspectors, testers, sorters, samplers, and weighers
Close: shares inspection records, but laboratory methods must be added.Transfers:Sampling, inspection, and records
Build next:Laboratory methods and data analysis
View career profileFrequently asked questions and sources
What does a quality control analyst do every day?
Perform routine and non-routine testing on raw materials, intermediates, finished products, and stability samples, compare results with specifications and control limits and propose release recommendations, while also calibrating and maintaining equipment, completing records, writing deviation reports, and participating in out-of-specification investigations. O*NET 19-4099.01 is on the US basis; actual work is checked against the position's test items and authorization.
How is a quality control analyst different from adjacent positions?
Inspectors often submit inspection and nonconformance records; lab analysts submit test results and deviation documentation; systems managers oversee rules, review, and follow-up across processes. Exact authority varies by employer and industry.
QC-L01 answer key and rubric (open on day 7)
Key: assay and moisture are within the stated limits. Microbiology exceeds its limit by 200 CFU/g. Record the out-of-specification result and request investigation under the scenario’s process. Do not use pH for the decision because of the sample ID, calibration, and specification gaps. Recommend holding the lot pending traceability, valid testing conditions, and investigation. Route the recommendation to the authorized reviewer. Score each item 0–2: specification comparison, record validity, investigation and open items, and release authority. Award 2 for complete and traceable, 1 for partial, and 0 for missing evidence or exceeding authority.
Will AI reduce quality control analyst positions?
Insufficient evidence: this round obtained no AI adoption rate, layoff rate, or year of position disappearance for this occupation. ILO and GPTs are GPTs study task potential, and WEF reports employer expectations; none of them can be used to calculate job replacement for this occupation. The AI uses on this page are editorial trial suggestions, and decisions and release are still reviewed by responsible personnel.
What is the wage of quality control analysts in mainland China?
Insufficient evidence: this round obtained no verifiable national or city wage for quality control analysts in mainland China and no current recruitment sample matching the duties. The National Bureau of Statistics 2025 industry average wage is statistical background, not the wage for this occupation; US wages are not converted to fill a national value.
Does the US median wage represent entry-level income?
No. In BLS May 2025 OEWS the 19-4099 category median is 62,280 US dollars per year, the lowest 10% is below 39,000, and the highest 10% is above 102,690; these are distribution positions of the 19-4099 category, not the 19-4099.01 detailed occupation, and cannot be treated as entry or senior levels.
What education and experience are needed to enter the field?
O*NET Job Zone 3 (medium preparation), with the new employee education distribution including high school or equivalent, associate degree, and bachelor's degree; the BLS 2025—2035 table lists the typical entry-level education as an associate degree and related work experience as None. This is the typical US background, not a uniform Chinese threshold; check the test items and experience requirements of the Chinese target position. Akeso’s fall recruiting table lists a physicochemical QC analyst in Zhongshan and Guangzhou Huangpu, with pH and other product tests, chromatography equipment upkeep, and reports. The row lists a bachelor’s degree. The posting header does not establish pay for this role.
Do I need to take any certification exams?
Insufficient evidence: this round did not verify a cross-industry uniform qualification requirement for quality control analysts in China. O*NET provides a certification lookup entry point, but a certificate does not equal a state license, employer authorization, or a universal requirement; education, training, specific qualifications, and organizational authorization are checked separately, and the exercises on this page grant no test signing or release authority.
What is the most error-prone part of this work?
Sample receipt, instrument status, the applicable specification, and original records can affect a result. Preserve gaps and request investigation under the procedure. Route any release decision to authorized staff.
What is the outlook for this occupation? Where can I move?
BLS 2025—2035 projects 19-4099 category employment rising from 89,500 to 93,400 people, a 4.4% increase, a net gain of about 3,900, and about 11,200 annual average openings including replacement; openings do not equal net additions or the number of hires in China. Adjacent directions require comparing real tasks and method responsibility, and the exploration on this page does not guarantee a successful transfer.
Sources
Compiled and edited by FermatMind career content; this round obtained no independent review by quality control analyst practitioners and makes no claim of expert sign-off.
The official materials were read and verified on 2026-09-30; O*NET, BLS OEWS, and the BLS employment projections table were all actually accessed, and each source retains its actual date and scope of application.
Occupational identity and tasks are checked against O*NET 19-4099.01; US wages against BLS May 2025 OEWS 19-4099 category, and projections against the BLS 2025—2035 employment projections table. Chinese NBS data serve only as industry background and no occupational or city value was filled in.
O*NET 19-4099.01 Quality Control AnalystsO*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET 19-4099.01 Quality Control Analysts- O*NET 19-4099.01 detailed occupation: official description, 26 tasks, occupational interest CIR, work context percentages, and work activities.
- Tasks and work context are on the US survey basis; when restated for a Chinese position, the duties must be checked again.
Limitations:Tasks, CIR interest, Job Zone 3, and US self-reported work context; does not prove Chinese qualifications, authorization, employer thresholds, or Chinese wages.
BLS May 2025 OEWS 19-4099 wage percentiles and employmentU.S. Bureau of Labor Statistics|United States|May 2025|official wage statistics
View original source:BLS May 2025 OEWS 19-4099 wage percentiles and employment- National 19-4099 employment 73,910; 10th percentile 39,000; 25th percentile 48,030; median 62,280; 75th percentile 79,780; 90th percentile 102,690; annual average 66,280.
- Percentiles are distribution positions in the occupation, not novice, experienced, or management levels.
Limitations:Only to the SOC 19-4099 "Other Life, Physical, and Social Science Technicians" category, not the 19-4099.01 detailed occupation; does not project individual income or Chinese wages.
BLS 2025—2035 employment projections and occupational characteristics table (table 1.2)U.S. Bureau of Labor Statistics|United States|2025—2035|official employment projections
View original source:BLS 2025—2035 employment projections and occupational characteristics table (table 1.2)- 19-4099 row: growth 4.4%, net increase 3.9 thousand people, annual average openings 11.2 thousand, typical entry-level education associate degree, related work experience None, self-employment share 7.4%.
- Projections are not promises; growth rate, net increase, and annual average openings cannot substitute for one another.
Limitations:19-4099 category row; 2025 employment 89.5 thousand, 2035 93.4 thousand, net increase 3.9 thousand, growth 4.4%, annual average openings 11.2 thousand; a different program from OEWS employment.
BLS May 2025 OEWS national industry-specific estimates (including ownership) directoryU.S. Bureau of Labor Statistics|United States|May 2025|official wage data directory
View original source:BLS May 2025 OEWS national industry-specific estimates (including ownership) directory- Industry-specific estimates require querying each industry; this round had one success, and the rest were limited by the access cap.
- Industry values not obtained are retained as insufficient evidence and are not replaced by category values.
Limitations:This round obtained only the 19-4099 median wage for industry 541700 scientific research and development services; the separate values for other industries were not obtained within the daily access limit, which does not mean they were not published officially.
Average annual wage of urban unit employees 2025National Bureau of Statistics|Mainland China|2025 statistics; released 2026-05|official wage statistics
View original source:Average annual wage of urban unit employees 2025- Chinese urban unit industry average wages are used only to explain the query scope and the statistical population.
- Industry averages, managerial category wages, or US values are not used to convert Chinese occupational wages.
Limitations:Published by industry and unit type, not the exact occupational wage of "quality control analyst"; no national or city separate value for this occupation was verified.
O*NET 19-4099.00 category occupational scopeO*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET 19-4099.00 category occupational scope- 19-4099.00 is "Other Life, Physical, and Social Science Technicians", and 19-4099.01 is its detailed occupation.
- The classification level is not equivalent to position duties or statutory qualifications.
Limitations:The category scope of the US occupational classification; no exact correspondence to a uniform Chinese occupational code was verified, and no mutual recognition of the classifications is assumed.
O*NET 19-4099.01 record, data, and documentation tasksO*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET 19-4099.01 record, data, and documentation tasks- Tasks include completing data collection forms, equipment logs, and inventory tables, and writing deviation reports and trend analyses.
- The specific jurisdictional requirements for record obligations must be checked against primary regulations separately.
Limitations:Supports only the existence of tasks such as test records, equipment logs, and deviation reports; it is not a legal source on personal information protection or data compliance.
O*NET Calibration Technologists and Technicians (17-3028.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET Calibration Technologists and Technicians (17-3028.00)- The calibration direction focuses on instrument calibration, maintenance, and quantity traceability, overlapping with the testing decision part of quality control analysts but with a different object.
- Comparing adjacent occupations does not prove that a person already has knowledge in that direction.
Limitations:Used only for the task scope of adjacent occupations; transfer suggestions are editorial judgments, not Chinese qualifications, employment projections, or wages.
O*NET Chemical Technicians (19-4031.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET Chemical Technicians (19-4031.00)- Chemical technicians focus on chemical experiments and analytical operations, while quality control analysts place more emphasis on decisions, release recommendations, and deviation investigations.
- Shared laboratory skills do not mean positions can be directly interchanged.
Limitations:Used only for the task scope of adjacent occupations; transfer suggestions are editorial judgments, not Chinese qualifications, employment projections, or wages.
O*NET Industrial Engineering Technologists and Technicians (17-3026.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET Industrial Engineering Technologists and Technicians (17-3026.00)- Industrial engineering technicians focus on processes, work hours, and human-machine efficiency, while quality control analysts focus on specification conformity and non-conformance decisions.
- Process improvement experience does not automatically equal authority to make quality decisions.
Limitations:Used only for the task scope of adjacent occupations; transfer suggestions are editorial judgments, not Chinese qualifications, employment projections, or wages.
O*NET software quality assurance analysts and testers (15-1253.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET software quality assurance analysts and testers (15-1253.00)- Software quality assurance focuses on code and version testing and defect tracking; the recording and decision logic is similar to physical sample testing but the object differs.
- Both share the "defect—reproduce—regression" approach but do not share qualifications and regulatory requirements.
Limitations:Used only for the task scope of an adjacent occupation; the object of that occupation is software, not laboratory or product testing, and transfer suggestions are editorial judgments.
Generative AI and Jobs: A 2025 updateInternational Labour Organization|Global|2025|primary occupational exposure research
View original source:Generative AI and Jobs: A 2025 update- The study uses task exposure as its basis and covers multiple economies.
- Potential exposure does not equal actual adoption or employment outcomes.
Limitations:Potential task exposure to generative AI across occupations; not the measured adoption rate, layoff rate, year of position disappearance, or wage effect for quality control analysts.
Editorially designed quality control paper exercises and checking suggestionsFermatMind content editorial|Does not represent the real market|2026-09-30; the exercise scenario is entirely fictional|editorial design and interpretation
- The exercises, reference deliverables, portfolio preparation, and seven-day plan are all editorial designs, used to observe the checking and judgment process.
- Any actual testing, release, and deviation handling must follow the quality system and authorization of the organization concerned.
Limitations:The fictional company "Qinglan Biological Products", sample batch L-2405, and materials E1—E5 are editorial designs, not employer samples, official question banks, real test records, or release authorizations.
Artificial Intelligence Risk Management Framework (AI RMF 1.0)National Institute of Standards and Technology|General US framework|January 2023|official voluntary risk management framework
View original source:Artificial Intelligence Risk Management Framework (AI RMF 1.0)- Provides a general structure for governing, identifying, measuring, and managing risk.
- The checking order proposed on this page is an editorial application, not a quality procedure prescribed by NIST.
Limitations:A voluntary general risk approach; it does not measure the adoption rate of quality control analysts and does not provide Chinese regulatory opinions or release authorization.
GPTs are GPTs: An Early Look at the Labor Market Impact Potential of Large Language ModelsEloundou et al.|US occupational tasks|2023(v5 2023-08-21)|primary research preprint
View original source:GPTs are GPTs: An Early Look at the Labor Market Impact Potential of Large Language Models- Estimates impact potential by matching tasks with language model capabilities.
- The potential estimate is not a field-measured automation rate.
Limitations:The task impact potential analysis does not predict development or adoption timing and does not prove on-site efficiency, decision accuracy, or employment outcomes in quality control.
The Future of Jobs Report 2025World Economic Forum|Economies covered by the survey|2025; outlook 2025—2030|employer expectations survey
View original source:The Future of Jobs Report 2025- The report summarizes employer expectations about employment and skill change.
- Expectation data cannot replace occupation-level measurement.
Limitations:Employer expectations are not results that have already occurred and are not a Chinese projection for this exact occupation.
O*NET 19-4099.01 education, training, and Job ZoneO*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET 19-4099.01 education, training, and Job Zone- Job Zone 3 (medium preparation), SVP 6.0—<7.0; registered apprenticeship available.
- The new employee education distribution is on the US self-reported basis.
Limitations:US typical education and training description, not a single employer's recruitment condition, and does not prove a uniform Chinese education or years-of-service requirement.
O*NET Chemists (19-2031.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET Chemists (19-2031.00)- Chemists take on method development, research, and interpretation, while quality control analysts mainly work with established methods and specifications.
- Method development experience can transfer, but position qualifications and responsibilities differ.
Limitations:Used only for the task scope of adjacent occupations; transfer suggestions are editorial judgments, not Chinese qualifications, employment projections, or wages.
O*NET Food Science Technicians (19-4013.00)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET Food Science Technicians (19-4013.00)- Food science technicians perform testing and process support in food processing settings, and microbiological and physicochemical testing partially overlaps with quality control analysts.
- Industry-specific standards must be checked separately.
Limitations:Used only for the task scope of adjacent occupations; transfer suggestions are editorial judgments, not Chinese qualifications, employment projections, or wages.
O*NET quality control systems managers (11-3051.01)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET quality control systems managers (11-3051.01)- Quality control systems managers are responsible for system, audit, and management duties, while analysts take on specific testing and decisions.
- Analytical experience does not automatically equal system management or audit qualifications.
Limitations:Used only for the task scope of an adjacent occupation; the management duties differ from those of quality control analysts, and transfer suggestions are editorial judgments.
BLS May 2025 OEWS 19-4099 25th and 75th percentile checkU.S. Bureau of Labor Statistics|United States|May 2025|official wage statistics
View original source:BLS May 2025 OEWS 19-4099 25th and 75th percentile check- Used to explain that percentiles are not job grade lines.
- This source does not prove employer recruitment conditions or qualification requirements.
Limitations:The 25th percentile 48,030 and the 75th percentile 79,780 both belong to the 19-4099 category; they are not used to project individual pay or Chinese wages.
Boundaries of the ILO 2025 task exposure studyInternational Labour Organization|Global|2025|primary occupational exposure research
View original source:Boundaries of the ILO 2025 task exposure study- Used only to explain the difference between exposure and adoption.
- The study must not be used to infer the layoff rate for this occupation.
Limitations:Potential exposure does not equal the actual adoption rate of quality control analysts; no measured proportion for this occupation or time of position disappearance was obtained from it.
Boundaries of GPTs are GPTs task potentialEloundou et al.|US occupational tasks|2023|primary research preprint
View original source:Boundaries of GPTs are GPTs task potential- Used only to explain the difference between task potential and on-site effects.
- The preprint must not be used to infer the adoption rate for this occupation.
Limitations:Task matching cannot prove on-site tool effects, decision accuracy, wage causality, or the year of position disappearance.
O*NET 19-4099.01 wages and employment trends sectionO*NET OnLine|United States|2025 wages; 2025 employment and 2025—2035 projections|official occupation profile
View original source:O*NET 19-4099.01 wages and employment trends section- The O*NET field shows a 2025 hourly median of 29.94 US dollars and an annual wage of 62,280 US dollars, consistent with OEWS.
- Employment and openings figures are labeled according to their respective statistical periods.
Limitations:The current O*NET wages, employment, and projections all use the broader 19-4099 category: 2025 base year 89,500, projected to 2025—2035; this is not the 19-4099.01 detailed occupation and is not mixed with OEWS survey employment.
O*NET validation engineers (17-2112.02)O*NET OnLine / U.S. Department of Labor|United States|updated 2026|official occupation profile
View original source:O*NET validation engineers (17-2112.02)- The official description is to design or plan equipment and process protocols so that products meet purity, safety, and quality requirements.
- Adjacent to quality control analysts in conformity decisions, but with different responsibility and authorization.
Limitations:Used only for the task scope of an adjacent occupation; validation engineers focus on protocol design and validation, and transfer suggestions are editorial judgments.
Three representative core tasks of this occupationFermatMind / 费马测试|2026-10-18|Editorial model estimation method
View original source:Three representative core tasks of this occupation- Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((25+25+75)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.
- Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
- Testing and judgment | Test using established methods and specifications | Perform routine and non-routine analyses on in-process materials, raw materials, environmental samples, finished products, or stability samples and compare results with specifications and control limits. — 25/100; weight=1/3; quality-control-analysts.profile.responsibilities-block.1[0]
- Equipment and calibration | Calibrate, verify, and maintain equipment | Instrument status determines whether data is usable, and calibration and maintenance must be recorded and faults eliminated. — 25/100; weight=1/3; quality-control-analysts.profile.responsibilities-block.1[1]
- Records and data | Complete data sheets, equipment logs, and inventory tables | Retain original records and versions, compile data, and perform the corresponding analysis. — 75/100; weight=1/3; quality-control-analysts.profile.responsibilities-block.1[2]
Limitations:Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.
China occupational classification: Chemical inspection technicianChina Ministry of Human Resources and Social Security et al.; government-hosted copy|Mainland China|2022|Primary document
View original source:China occupational classification: Chemical inspection technician- Chemical inspection technicians (6-31-03-01) overlap with laboratory QC in sample preparation, instrumental analysis, and records. Check separately who investigates deviations, recommends release, or authorizes it.
Limitations:Task overlap does not establish a grade, authority, or wage.
Akeso: physicochemical QC analystAkeso|Mainland China|2026-09-23|job_posting_sample
View original source:Akeso: physicochemical QC analyst- Akeso’s fall recruiting table lists a physicochemical QC analyst in Zhongshan and Guangzhou Huangpu, with pH and other product tests, chromatography equipment upkeep, and reports. The row lists a bachelor’s degree. The posting header does not establish pay for this role.
Limitations:One posting for task comparison. It does not establish current availability, market pay, or national requirements.
Zhejiang Huishi Pharmaceutical: QA/QCZhejiang Huishi Pharmaceutical|Mainland China|2026-08-24|job_posting_sample
View original source:Zhejiang Huishi Pharmaceutical: QA/QC- The QC section of a Zhejiang Huishi Pharmaceutical QA/QC posting covers testing raw materials, intermediates, finished products and stability samples, reporting, and method validation. Its combined title does not establish analyst-only duties or pay.
Limitations:One posting for task comparison. It does not establish current availability, market pay, or national requirements.
The Chinese explanation is for career exploration and does not establish mutual recognition of qualifications between countries. E1—E5 are entirely fictional editorial designs, with no real testing, sample retention, or release; actual testing, release, and deviation handling follow the quality system and authorization of the organization concerned.
MBTI Personality Test · Big Five Personality Test · Enneagram Test · IQ Reasoning Assessment · EQ Assessment

