Preparing content…

Computer, Automated Teller, and Office Machine Repairers

SOC 49-2011 · O*NET 49-2011.00

RIASEC · RCOn-site diagnosis and fault localization / parts replacement and retesting / installation and configuration and customers and recordsIsolation and voltage testing · parts and retesting · customer data and warranty boundaries
33%AI Impact ScoreFermatMind / 费马测试

Repair, maintain or install computers, word processing systems, automated teller machines and office electronic equipment such as copiers and fax machines: travel to customers' stores or offices to repair equipment or provide emergency repair service; talk with customers to establish the fault details and disassemble machines to inspect parts for wear or defects; use oscilloscopes and multimeters or diagnostic software to test circuits to locate defects; use hand or power tools to repair, adjust or replace electrical or mechanical parts and reassemble; assemble, align, adjust and calibrate to specifications; operate machines to test function; install and configure new equipment and operating system software and peripherals; reinstall or adjust software settings; update existing equipment; maintain parts inventory and order spare parts; explain operation and maintenance to customers; and maintain repair records and complete bills and time cards and expense reports.

Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+0+50)/3+0.5)=33; fermatmind-ai-impact-v1; 2026-10-18.

47,810 USD/year (median; hourly 22.99 USD)U.S. median wage (BLS May 2025 wage data)O*NET OnLine / U.S. Bureau of Labor Statistics
−3.0% (2025–2035)U.S. projected employment change (2025–2035)U.S. Bureau of Labor Statistics
72,100 jobs (2025)U.S. jobs (2025)U.S. Bureau of Labor Statistics
6,100 average annual openings (2025–2035)U.S. average annual openings (2025–2035)U.S. Bureau of Labor Statistics
No data availableMainland China nationwide occupational wages (exact occupation not verified)

Quick judgment

Who may enjoy repairing computers, ATMs and office equipment?

Equipment repair can suit you if you enjoy repeating checks, retesting before handoff, explaining what you found to customers, and leaving a clear record of warranty work.

Education, on-the-job training, professional certifications, licenses and job authorization must be verified separately: O*NET lists this occupation as Job Zone 1-2 (little to some preparation), the Job Zone group description says "usually requires a high school diploma or equivalent, some positions do not," related experience ranges from little to a few months up to a year, on-the-job training ranges from a few days to a year, and the SVP range is below 6.0; O*NET displays 8 candidate certifications using CareerOneStop directory data (such as CompTIA A+ Certification, Certified Electronics Technician - Journeyman-Level - Computer, Certified Network Computer Technician, Computer Service Technician, Fiber Optics Technician, Wireless Communications, among others), but a certification is not equal to a degree, an employer appointment, manufacturer authorization or a live electrical work permit; live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality of personal information on customer equipment, and warranty and asset responsibility must be confirmed item by item according to the applicable jurisdiction and employer policies; this page describes tasks and boundaries based on O*NET and public sources, and does not present education or certifications as statutory qualifications.

Who is more likely to fit Computer, Automated Teller, and Office Machine Repairers?

Explore repair work if you enjoy narrowing a symptom and recording what can be checked before handing a device back.

When should you be cautious about choosing Computer, Automated Teller, and Office Machine Repairers?

Service permission differs across computers, printers and cash-handling terminals. Check the equipment owner and authorization before acting.

How can a small experiment test your fit for Computer, Automated Teller, and Office Machine Repairers?

In 09 Entry, qualifications and career development, find “MR-11: Triage Two Equipment Service Calls.” Complete the fictional paper record before reading the answer key. Allow about 10 minutes for the paper exercise.

Career profile

Computer, Automated Teller, and Office Machine Repairers repair, maintain or install computers, word processing systems, automated teller machines and office electronic equipment such as copiers and fax machines. The typical loop is to receive a work order and travel to the customer site or shop, confirm the symptoms with the customer, disassemble and test after isolation and safety confirmation to localize the fault, replace or adjust parts, reassemble and retest and calibrate to specifications, explain the repair result to the customer, and file the work order and bill and records; live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality of personal information on customer equipment, and warranty and asset and manufacturer authorization must be carried out by positions with the corresponding authority and qualifications, in accordance with the applicable jurisdiction and employer policies.

Structured explanation of the occupational profile

Three connected but distinct work areas

The work of Computer, Automated Teller, and Office Machine Repairers can be divided into three connected but distinct work areas. The first is on-site diagnosis and fault localization: travel to customers' stores or offices to repair equipment or provide emergency repair service; talk with customers to establish the details of the equipment problem; disassemble machines to inspect wires, gears, bearings and similar parts for wear or defects, using hand or power tools and measuring instruments; use oscilloscopes, signal generators, ammeters, voltmeters or specialized diagnostic software to test parts or circuits of faulty equipment to locate defects; and read blueprints, charts or schematics to determine equipment settings or adjustment parameters. The second is repair and parts replacement and retesting: use hand tools, power tools or soldering equipment to repair, adjust or replace electrical or mechanical parts; reassemble machines after making repairs or replacing parts; operate machines to test the function of parts or mechanisms; assemble equipment to specifications; align, adjust or calibrate equipment to specifications; calibrate test instruments; and clean, oil or adjust mechanical parts to maintain operating efficiency and prevent failures. The third is installation, configuration and customers and records: install and configure new equipment, including operating system software or peripherals; reinstall software programs or adjust existing software settings to fix equipment faults; update existing equipment, such as installing updated circuit boards or adding memory; test new systems to ensure they are in working order; maintain parts inventory and order other parts needed for repairs; explain equipment operation, maintenance or programming to customers; maintain equipment maintenance or repair records; and complete repair bills, shop records, time cards or expense reports.

On-site diagnosis and fault localization:

Repair, maintain or install computers, word processing systems, automated teller machines and office electronic equipment such as copiers and fax machines

  1. 01Take the work order and communicate on site
  2. 02disassemble, inspect and test
  3. 03decide whether the fault is mechanical or electrical
  4. 04replace or adjust parts
  5. 05retest and calibrate
  6. 06customer confirmation and work order filing

Parts replacement and retesting:

Make each service call a deliverable result in which "the symptoms and test results are written clearly, replaced parts are traceable, retesting has data, the customer has knowingly confirmed, and the work order supports warranty and billing"

  1. 01Ask about the symptoms
  2. 02confirm isolation and safety
  3. 03disassemble, inspect and test
  4. 04localize and replace or adjust
  5. 05reassemble and retest
  6. 06record and hand over
Installation and configuration and customers and recordsService work orders and customer confirmation records, symptoms and test data and diagnostic conclusions, disassembly and assembly and calibration records, parts replacement and inventory and ordering records, repair bills and time cards and expense reports, software and configuration change records, and equipment maintenance history and warranty and asset information.

Where is the boundary between this occupation and adjacent occupations?

Neighboring positions include office machine operators, coin machine service, audio-visual equipment installation and repair, electrical and electronic equipment repair, computer user support and network support. When comparing, first verify the task object, whether the role is responsible for disassembly and inspection and parts replacement, the scope of system configuration, customer delivery and safety authority; a broad occupational title does not imply a uniform permit for electrical power work, nor does it establish that support positions do not handle hardware. This occupation's definition centers on the repair, maintenance or installation of computers, ATMs and office electronic equipment.

DimensionPrimary trackComparison track
Core purposeBoth indoors and at customer sites: 70% work indoors in an environmentally controlled setting every day, but 33% are in an enclosed vehicle or operating enclosed equipment every day (23% never), 22% are exposed every day to minor burns and cuts and bites or stings (32% never), 18% are exposed to hazardous conditions every day (37% never), 28% are exposed to contaminants every day (16% never), and 82% have a regular fixed scheduleAdvance the work based on the O*NET occupational definition and its 25 tasks, equipment and manufacturer technical materials and schematics, the employer's safety and live work and data confidentiality policy, and warranty and asset and work order record requirements
Main counterparts and basisOffice machine operators use the equipment; this occupation is responsible for disassembly and inspection, judging the fault, replacing parts and restoring the equipment to a usable stateVerify each step against the O*NET occupational definition and its 25 tasks, manufacturer and equipment technical materials, the employer's safety and isolation and data confidentiality policy, and work order and warranty and asset records
Core processComputer support specialists mainly support software and accounts and desktop issues; this occupation must physically disassemble and reassemble, and replace parts and is accountable for whether the equipment is truly repairedAsk about the symptoms → safety and isolation → disassemble, inspect and test → localize and replace → reassemble and retest → record and hand over
Main outputsElectrical and electronic equipment installation and repair covers many kinds of equipment and directions; this occupation focuses on computers, ATMs and office electronic equipment. Authority should be verified by specific equipment, task and jurisdiction, and electrical power installation requirements cannot be presumed from a neighboring occupation title alone.Service work orders and customer confirmation records, symptoms and test data, disassembly and assembly and calibration records, parts replacement and inventory records, repair bills and time records, software and configuration change records
Responsible partyThis page presents task and responsibility boundaries and does not constitute any statement of electrical safety, data compliance or legal conclusionsEquipment availability and customer data security take priority over rushing to close work orders; live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality of personal information on customer equipment, and warranty and asset and work order responsibility must be carried out by positions with the corresponding authority and qualifications, in accordance with the applicable jurisdiction and employer policies; the basis for testing and replacement must be documented and reviewable; this page does not replace electrical safety or data compliance or legal advice
Admission and licensingMainland China: this page did not establish an occupational sub-class fully equivalent to O*NET-SOC49-2011.00, and the precise occupational wage remains a gap. Enterprises specializing in computer and office equipment repair can be given an industry background under category 812 of GB/T4754-2017 and the resident services, repair and other services sector; positions inside banks, sales organizations or units must verify the employer's industry separately. This industry average does not represent this occupation's wages.The U.S. O*NET places this occupation in Job Zone 1-2; the high school/GED, experience and training durations there are general descriptions of the Job Zone group, not the education distribution for this occupation. The page lists 4 apprenticeship title examples; BLS Table 1.2 gives the typical entry education for 49-2011 as some college but no degree, no related experience, and short-term on-the-job training. Specific employer requirements must be verified separately; the capability stages are an editorial compilation.
Conclusion boundariesCross-position comparison cannot rest only on similar titles; whether the role physically disassembles and reassembles parts, whether it is accountable for equipment restoration and customer data, and differences in authorization and work environment mean that similar tasks do not imply interchangeabilityU.S. wages use BLS May 2025 national employee data, and employment uses the BLS2025—2035 overall projection; precise occupational pay for mainland China was not obtained, and the repair enterprise industry annual average serves only as a narrowly scoped reference. Market, period, occupation and industry scope are not interchangeable.

Core responsibilities

  1. 01

    Travel to customers' stores or offices to service machines or to provide emergency repair service.

  2. 02

    Reassemble machines after making repairs or replacing parts.

  3. 03

    Advise customers concerning equipment operation, maintenance, or programming.

  4. 04

    Maintain parts inventories and order any additional parts needed for repairs.

Key occupational judgments

Six recurring occupational judgments: whether isolation and prevention of unexpected re-energization are completed per procedure; whether symptoms and test results support the diagnostic conclusion; whether replacement and adjustment are traceable and can be retested; whether data on customer equipment is limited to the necessary scope; whether warranty and asset and work order responsibility stays within the scope of authority; and whether repair bills and inventory records match the actual actions.

  1. 01

    Isolate the equipment per the applicable procedure before disassembling electrical parts and prevent unexpected re-energization; confirm the equipment and power and line status before starting work; do not treat diagnostic convenience as authorization for live work, and do not skip personal protective equipment and tool checks.

    Check one: are isolation and prevention of unexpected re-energization completed per procedure

  2. 02

    Turn the customer's description of symptoms into testable hypotheses and rule them out item by item with results from an oscilloscope or multimeter or diagnostic software; distinguish mechanical faults from electrical faults and avoid replacing parts directly from experience; for faults that cannot be reproduced, write down the conditions and the limits of observation.

    Check two: do the symptoms and test results support the diagnostic conclusion

  3. 03

    Record the replaced part's model and source and serial number (where obtainable) and the condition of the original part; complete assembly and alignment and calibration to specifications and retest; write the test data into the work order so that warranty and billing and review have a basis.

    Check three: are replacement and adjustment traceable and retestable

  4. 04

    Access customer data only within the lawful, clearly defined purpose and minimum necessary scope required by the repair; before backing up or resetting, verify the processing basis, customer notice and organizational authorization and record them. Written confirmation may serve as an editorial suggestion, but it cannot be said that the personal information protection law requires written consent for all repairs.

    Check four: is data on customer equipment limited to the necessary scope

  5. 05

    Disassembly, parts replacement, program installation and service restoration are carried out within the work order, customer authorization, warranty and asset responsibility scope; for matters beyond authorization (such as non-original parts, modifications, unauthorized access), apply first and then act; document authorizations and exceptions.

    Check five: do warranty and asset and work order responsibilities stay within the scope of authority

  6. 06

    Repair bills and time cards and expense reports are completed according to the actual actions; parts requisition and inventory and ordering records match the actual replacements; repeat repairs and second visits are recorded separately with the reason, and the same fault is not masked with a new work order.

    Check six: do repair bills and inventory records match the actual actions

Work reality

Communication and customer contact
94% have telephone conversations every day; 76% have face-to-face discussions every day (11% never); 87% use email every day (11% never); 63% consider dealing with external customers or the public extremely important (13% very important, 11% fairly important); 36% have sustained contact with others (19% contact about half the time).
Decisions and responsibility
63% make decisions every day that affect others or financial resources or the organization's reputation (13% at least once a week but not every day, 15% never); 33% consider their decisions very important to colleagues or company results (15% no influence); 13% have very high responsibility for the work results of other employees (12% limited, 29% none); 13% have very high responsibility for the health and safety of others (14% limited, 36% none).
Precision and pace
57% consider repetitive tasks extremely important (23% not at all important); 35% consider being very exact or highly accurate extremely important (12% important, 11% fairly important); 64% face strict deadlines every day (12% at least once a week but not every day, 16% at least once a month but not every week); 14% write formal letters and memos every day (27% never); 81% work 40 hours per week (19% more than 40 hours); 82% have a regular fixed schedule (18% irregular).
Posture and physical work
71% use their hands to handle objects and tools continuously or almost continuously (23% less than half the time); 40% stand continuously or almost continuously (26% more than half the time, 20% about half the time); 13% kneel, crouch, stoop or crawl continuously or almost continuously (17% more than half the time); 13% bend or twist continuously or almost continuously (13% about half the time, 54% less than half the time); 46% need to walk or run less than half the time; 24% sit about half the time (40% never); 30% make repetitive motions less than half the time (20% never); 40% work somewhat close to others.
Site and environment
70% work indoors in an environmentally controlled setting every day; 33% are in an enclosed vehicle or operating enclosed equipment every day (23% never); 22% are outdoors exposed to all weather conditions every day (62% never); 16% work in an uncontrolled indoor environment at least once a week but not every day; 78% never work outdoors under cover; 28% are exposed to contaminants every day (16% never); 22% are exposed daily to very hot or very cold temperatures (52% never); 12% are exposed to distracting noise at least once a week but not every day (22% at least once a month but not every week).
Hazards and protection
18% are exposed to hazardous conditions every day (37% never); 22% are exposed every day to minor burns and cuts and bites or stings (32% never); 12% are exposed to hazardous equipment at least once a month but not every week (77% never); 12% are exposed to heights at least once a month but not every week (86% never); 86% never climb ladders or scaffolds; 22% wear common protective and safety equipment at least once a month but not every week (54% never); 91% never wear specialized protective and safety equipment; 98% never come into contact with radiation; 94% never come into contact with whole body vibration.
Automation and collaboration
42% of respondents selected “moderately automated” (11% slight, 33% not at all automated); 11% consider the pace of work being determined by equipment speed extremely important (15% important, 65% not at all important); 21% consider work with a work group or team extremely important (16% important, 11% not at all important); 14% consider coordinating or leading others extremely important (26% important, 23% not at all important); 14% consider competition extremely intense (19% very intense, 27% not at all intense).
Conflict and pressure
13% face conflict situations every day (42% at least once a week but not every day, 16% at least once a month but not every week, 19% never); 16% deal at least once a week but not every day with unpleasant or angry or discourteous people (29% at least once a year but not every month); 51% consider the consequences of error serious (15% fairly serious, 24% not at all serious); 34% need to keep or regain balance less than half the time (62% never).
Boundaries and authorization
Live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality of personal information on customer equipment, and warranty and asset and manufacturer authorization must be carried out by positions with the corresponding authority and qualifications, in accordance with the applicable jurisdiction and employer policies; test data and replaced parts and customer authorization must be documented and reviewable; the U.S. wages on this page are BLS May 2025 data, and employment and the projection follow the BLS 2025—2035 scope; precise occupational pay for mainland China is still missing, and the related industry average for category 812 repair enterprises serves only as background and cannot be used to derive personal wages.

Professional basis and limits of use

O*NET OnLine 49-2011.00 (occupational identity and preparation level)U.S. wages and employment (BLS May 2025 wage data; employment and the projection follow the BLS 2025—2035 scope)Precise Chinese mainland wage gap and repair enterprise industry referenceO*NET industry structure (shares, not the number of positions or wages)O*NET technology list and work context
O*NET OnLine 49-2011.00 (occupational identity and preparation level)
The exact identity on this page is O*NET-SOC49-2011.00, with tasks covering the repair, maintenance or installation of computers, ATMs and office electronic equipment. The interest indicators are RC (R81/C75/I28/E13/S13/A0), not a personal interest distribution or a hiring requirement. Job Zone1-2 and an SVP below 6.0 are the preparation level; the group's generic high school/GED statement is not the education survey distribution for this occupation.
U.S. wages and employment (BLS May 2025 wage data; employment and the projection follow the BLS 2025—2035 scope)
U.S. wages use the BLS May 2025 national employee scope, with a median of 22.99 USD/hour and 47,810 USD/year; annual wages at the 10/25/50/75/90 percentiles are 35,910/38,900/47,810/59,870/71,730 USD. The BLS Table 1.2 overall employment projection for 2025—2035 is 72,100 to 69,900, an official net change of about -2,100, or -3.0%, with 6,100 average annual openings. The overall projection is not an AI attribution; a percentile is not seniority, OEWS wages exclude the self-employed, and personal income cannot be inferred.
Precise Chinese mainland wage gap and repair enterprise industry reference
Insufficient evidence: no national Chinese mainland median, percentiles or starting pay fully corresponding to Computer, Automated Teller, and Office Machine Repairers was obtained. National Bureau of Statistics 2025 national urban unit annual average wages for "resident services, repair and other services": non-private units 70,226 yuan and private units 52,059 yuan, both pre-tax annual averages. This is the employee average for the entire industry category, not this occupation's median, an individual's take-home pay or a novice wage; the two unit types are listed separately and cannot be spliced into an occupational wage range. The statistics exclude sole proprietors and the self-employed. The match is limited to enterprises classified under 812 computer and office equipment repair; other employers are verified separately.
O*NET industry structure (shares, not the number of positions or wages)
The current O*NET industry page and detail page agree on the 2025 top three industries: wholesale 29%, retail 28%, other services (except public administration) 17%, and other industries 26%. This is the U.S. occupational employment structure, not industry wages or job opportunities; the original author's past review records are retained, and no reason for historical change is inferred.
O*NET technology list and work context
Technology and work context: the work context for this occupation shows 94% have telephone conversations every day, 87% use email every day (11% never), 76% have face-to-face discussions every day (11% never), 71% use their hands to handle objects and tools continuously or almost continuously (23% less than half the time), 70% work indoors in an environmentally controlled setting every day, 64% face strict deadlines every day, 63% consider dealing with external customers or the public extremely important (13% very important), 63% make decisions every day that affect others or financial resources or the organization's reputation, 57% consider repetitive tasks extremely important (23% not at all important), 40% stand continuously or almost continuously (26% more than half the time), 35% consider being very exact or highly accurate extremely important, 33% are in an enclosed vehicle or operating enclosed equipment every day (23% never), 28% are exposed to contaminants every day (16% never), 22% are exposed every day to minor burns and cuts and bites or stings (32% never), 18% are exposed to hazardous conditions every day (37% never), 42% of respondents selected “moderately automated” (33% not at all automated), 94% never come into contact with whole body vibration, and 98% never come into contact with radiation.

Career direction comparison

How do I choose among the six adjacent directions for computer, automated teller and office machine repairers?

The table below compares the positions and occupations adjacent to this occupation: office machine operators (except computer), coin vending and machine servicers and repairers, equipment installers (audio-visual equipment installation and repair), electrical and electronic equipment installers and repairers, computer support specialists and computer network support specialists. The four columns each answer the same kind of question: what the direction does, where the key difference from this occupation lies, and what kind of person is better suited to choosing it.

How do I choose among the six adjacent directions for computer, automated teller and office machine repairers?
Career directionCore work and outputKey differencesBest-fit choice
Office machine operators (except computer)Mainly operation records and output and quality records.Office machine operators (except computer) run and monitor equipment, may clean or make minor repairs, and report major repair needs; disassembly and parts replacement depend on the job; this occupation is responsible for restoring the equipment to a usable state.People willing to operate equipment per procedure and ensure output suit that direction; people willing to physically disassemble and reassemble and troubleshoot faults suit this occupation.
Coin vending and machine servicers and repairersMainly collection and restocking and coin machine maintenance records.Coin vending and machine servicers and repairers serve coin-operated and amusement equipment, and the fault types and scope of authorization differ from office equipment; this occupation covers computers and ATMs and office electronic equipment.People willing to maintain coin-operated equipment in public places suit that direction; people willing to handle computers and office equipment suit this occupation.
Equipment installers (audio-visual equipment installation and repair)Mainly installation and wiring and commissioning records.Equipment installers (audio-visual equipment installation and repair) mainly install and wire audio-visual equipment, usually involving rigging and cable routing; this occupation mainly does component-level repair inside equipment.People willing to install and wire audio-visual equipment suit that direction; people willing to do component-level diagnosis and replacement suit this occupation.
Electrical and electronic equipment installers and repairersInstalls, tests or repairs electrical and electronic equipment. Devices and signoff responsibilities vary by assignment.Electrical and electronic equipment installers and repairers install, test or repair a range of equipment, such as industrial controls and motor systems, with authorization depending on equipment, task and jurisdiction; this occupation works at equipment level with manufacturer technical materials and warranty authorization as the boundary.People willing to install and repair on-site electrical systems suit that direction; people willing to troubleshoot within equipment-level scope suit this occupation.
Computer support specialistsMainly work orders and configuration and account handling records.Computer support specialists mainly provide remote or on-site support for software and accounts and desktop issues and usually do not do component-level disassembly and repair; this occupation mainly does hardware disassembly and inspection and parts replacement.People willing to do software and account and desktop support suit that direction; people willing to do hardware disassembly and assembly and retesting suit this occupation.
Computer network support specialistsMainly network configuration and fault and change records.Computer network support specialists mainly configure and troubleshoot network devices and servers, involving network and system authority; this occupation covers client devices and office electronic equipment.People willing to troubleshoot networks and servers suit that direction; people willing to do on-site equipment repair suit this occupation.

How to choose

The six directions share some capabilities with this occupation: understanding equipment and drawings, troubleshooting by symptom, communicating with customers or colleagues, and recording process and results. The real difference lies in the object and the authorization: this occupation covers computers, ATMs and office electronic equipment and does component-level replacement; office machine operators run equipment and may clean it or make minor repairs as assigned; the coin machine and audio-visual directions have different objects; the electrical and electronic installation direction covers a range of industrial and commercial equipment; check authorization for the actual equipment, task and jurisdiction; and support positions mainly handle software and networks and accounts and may handle minor hardware repairs and refer major faults to a repair team. When choosing, it is advisable to first validate with one deliverable exercise in "symptoms — test sequence — replacement and retesting — work order records," rather than comparing titles first.

Moving from this occupation to an adjacent direction usually requires filling in new competencies and authorization: the operator direction requires equipment operation and output and quality record experience; the coin machine direction requires collection and on-site work and coin machine maintenance experience; the audio-visual installation direction requires wiring and rigging and commissioning experience; the electrical and electronic installation direction requires the technical skills and any authorization for the specific equipment and regulated tasks; the computer support direction requires operating system and account and desktop support experience; the network support direction requires network configuration and troubleshooting experience. Hands-on ability and testing approach can transfer, but the object and the authorization boundary of each direction must be rebuilt.

AI impact on this career

Will AI replace computer, automated teller and office machine repairers?

This page distinguishes tool capability, actual adoption and job outcomes. Fault code classification, material retrieval and record drafts are suggested assistive uses derived from the occupational tasks and must be tested on the same models, versions and real work orders; insufficient evidence: no verifiable sample of manufacturer investment, AI adoption rates or repair effects for this occupation was obtained. AI Impact Score 33% is an editorial estimate. Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+0+50)/3+0.5)=33; fermatmind-ai-impact-v1; 2026-10-18.The three tasks, ratings and sources are listed in the FermatMind method source record on this page.

AI assessment method and sources

FermatMind AI Impact Score estimation method v1

FermatMind / 费马测试 · 2026-10-18

  • Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+0+50)/3+0.5)=33; fermatmind-ai-impact-v1; 2026-10-18.
  • Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
  • On-site diagnosis and fault localization|Travel to customer sites and test by symptom to localize the fault|Travel to customers' stores or offices to repair equipment or provide emergency repair service; talk with customers to establish the details of the equipment problem; disassemble machines to inspect wires and gears and bearings and similar parts for wear or defects; use oscilloscopes and signal generators and ammeters and voltmeters or specialized diagnostic software to test parts or circuits to locate defects; and read blueprints and charts and schematics to determine equipment settings or adjustment parameters (corresponds to the first, fifth, sixth, sixteenth and nineteenth O*NET tasks). — 50/100; weight=1/3
  • Repair and replacement and adjustment|Repair or replace electrical and mechanical parts and adjust and calibrate to specifications|Use hand tools and power tools or soldering equipment to repair, adjust or replace electrical or mechanical parts; reassemble machines after making repairs or replacing parts; align, adjust or calibrate equipment to specifications; and clean, oil or adjust mechanical parts to maintain operating efficiency and prevent failures (corresponds to the eighth, second, twentieth and seventeenth O*NET tasks). — 0/100; weight=1/3
  • Installation and configuration and updates|Install and configure new equipment and operating system software and peripherals|Install and configure new equipment, including operating system software or peripherals; reinstall software programs or adjust existing software settings to fix equipment faults; and update existing equipment, such as installing updated circuit boards or adding memory (corresponds to the eleventh, thirteenth and fourteenth O*NET tasks). — 50/100; weight=1/3

Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.

Which equipment repair tasks can AI handle?

Editor's suggestion: fault code classification, manufacturer material retrieval and repair record drafts can be tested first. Testing should check against the model, version, original text and confirmed work orders; this page obtained no occupation-specific study comparing the reliability or benefit of these tasks, so candidate uses cannot be called verified capability.

Which steps will actually be adopted?

Insufficient evidence: no employer sample, adoption rate or manufacturer investment material on AI use in computer, ATM and office equipment repair positions was obtained. A job posting mentioning a piece of software only shows that the skill appears in the posting text and does not prove on-the-job adoption, usage frequency or AI deployment.

Will AI reduce equipment repair positions?

The BLS Table 1.2 overall employment projection for SOC 49-2011 in 2025—2035 is 72,100 to 69,900, a published net change of about 2,100 fewer, or a decline of 3.0%, with about 6,100 average annual openings. Each column is rounded separately by the official source, and subtracting the two displayed endpoints is not substituted for the net change column. This is an overall employment projection, not an AI attribution; it cannot be used to conclude that AI caused job losses.

Task impact matrix

Comparison of AI impact across career tasks
Work areaTaskCurrent changeHuman control point
On-site diagnosis and fault localizationTravel to the customer site and talk with the customer to establish the equipment fault details and disassemble, inspect and test to locate the defectFault code classification and material retrieval and record drafts can be assisted; symptom judgment and disassembly sequence remain with peopleConfirm that the work order scope and symptoms and customer authorization and your own authority are written down.
Parts replacement and retestingRepair, adjust or replace electrical and mechanical parts and reassemble the equipment after the repair or replacementPart matching and parameter organization can be assisted; complete assembly and the replacement decision remain with peopleConfirm that isolation and prevention of unexpected re-energization and the disassembly sequence and personal protection are in place.
Parts replacement and retestingAssemble to specifications and operate the equipment to test function and align, adjust and calibrate the equipmentTest data organization can be assisted; whether the retest meets the standard and whether to hand over remain with peopleConfirm that alignment and adjustment and calibration to specifications and the retesting criteria are specified.
Installation and configuration and customers and recordsInstall and configure new equipment and operating system software and peripherals and update existing equipmentConfiguration steps and compatibility materials can be assisted; data handling and authorization judgments remain with peopleConfirm that equipment data handling and the warranty and asset and manufacturer authorization boundaries are written down.
Installation and configuration and customers and recordsMaintain repair records and parts inventory and complete repair bills and time cards and expense reportsBill and inventory summaries can be assisted; the authenticity of records remains with peopleConfirm that the scope of customer data access and the work order and billing definitions are specified.
Installation and configuration and customers and recordsCarry out the work within the work order and customer authorization and warranty scope and retain recordsRecord organization can be assisted; authorization and exception handling remain with peopleConfirm that the responsibility boundaries for work orders and warranty and assets and customer authorization are written down.
Installation and configuration and customers and recordsAccess customer equipment data within the necessary scope and handle and protect it as requiredData lists and handling record organization can be assisted; compliance judgments remain with peopleConfirm that the access and handling and confidentiality requirements for data on customer equipment are written down.

Why does employment evidence reach different conclusions?

The five evidence cards each explain the source, the research object, the conclusion and the limits of use. They answer "what evidence exists," not "will this occupation be replaced."

O*NET-SOC 49-2011.00 detailed occupational information (page updated 2026)

View source ↗
Subject
The official task list and work activities and work context for this occupation
Finding
Of the 25 tasks in page order, the first few are: travel to customers' stores or offices to repair equipment or provide emergency repair service; reassemble machines after making repairs or replacing parts; explain equipment operation and maintenance or programming to customers; maintain parts inventory and order other parts needed for repairs; and talk with customers to establish the details of the equipment problem; the importance of the first few is 87 and 84 and 82 and 82 and 81 in order, with 24 Core tasks and 1 Supplemental task (calibrate test instruments, 58)
Limitation
Covers only the tasks and work context listed on the O*NET page for this occupation; does not include what any specific jurisdiction or employer requires for live work, data confidentiality and warranty and assets

O*NET national wage table (BLS OEWS data) (49-2011.00)

View source ↗
Subject
The national wage distribution and employment and growth and average annual openings for this occupation in the United States
Finding
The page shows May 2025 median wages of 22.99 USD/hour and 47,810 USD/year (10/25/50/75/90 percentiles 35,910 / 38,900 / 47,810 / 59,870 / 71,730 USD); employment and the projection follow the BLS 2025—2035 scope registered in the route, with about 72,100 in 2025, a 3.0% decline, and about 6,100 average annual openings; this is a statistical distribution, not personal income or hiring probability
Limitation
U.S. wages are BLS May 2025 data, and employment and the projection follow the BLS 2025—2035 scope; they describe the occupational population rather than an individual offer, the median is not entry-level pay, and region and industry and on-site service arrangements and self-employment status all change the specific compensation

ILO《Generative AI and Jobs: A Refined Global Index of Occupational Exposure》

View source ↗
Subject
An occupation-level generative AI exposure index across economies
Finding
The study provides an exposure ranking and a measurement method and cannot be transcribed into a replacement timeline for a particular occupation
Limitation
It is an exposure measure, not an adoption rate, automation rate or unemployment probability; it does not apply to a single employer or a single position

NIST AI Risk Management Framework 1.0

View source ↗
Subject
Risk governance and management processes for AI systems
Finding
NIST AI RMF 1.0 provides a framework for risk identification, measurement and management. On that basis this page offers the editorial suggestion that diagnostic assistance must verify model, source and results and be documented; the framework does not directly prove effects for this occupation and does not constitute a mandatory employer process.
Limitation
It is a governance framework and contains no occupation-level adoption data; citing it does not constitute a quantified conclusion about this occupation's risk

O*NET technology list page (hiring technology keywords for this occupation)

View source ↗
Subject
Statistics on technology keywords appearing in employer job postings
Finding
The O*NET hiring technology page currently lists 17 software skills, with data from U.S. national Lightcast job postings for January 1, 2025 to December 31; Office 6%, Excel 5%, Outlook and PowerPoint 3% each, Word and Linux 1% each, with some below 1% or no share provided. The share is the proportion of deduplicated postings for this occupation that mention the skill, not proficiency, on-the-job usage or AI adoption.
Limitation
Hiring keyword statistics change with technology hype and cannot be taken as skill proficiency or the scale of job demand

Why does impact differ by work direction?

Editor's suggestion: compare tool assistance candidates and manual verification points across the three task types of on-site diagnosis, parts replacement and retesting, and installation and configuration and customer records; the three types come from an O*NET task compilation and do not represent measured AI change or adoption outcomes.

On-site diagnosis and fault localization

AI primarily changesRead and classify fault codes, retrieve technical materials and historical work orders, and draft symptoms and test steps and diagnostic records.

Human responsibility remainsJudge whether the symptoms and test results support the conclusion, judge live-work risk and disassembly sequence, and be accountable for the diagnostic conclusion and customer explanation.

Parts replacement and retesting

AI primarily changesLook up part compatibility and substitute models, organize torque and calibration parameters, and summarize test data and retesting records.

Human responsibility remainsJudge the disassembly and assembly sequence and whether assembly is complete, judge whether the retest data meet the standard, and be accountable for whether the equipment is truly restored to working order.

Installation and configuration and customers and records

AI primarily changesDraft work orders and costs and customer explanation materials, and summarize inventory and ordering and warranty and asset information.

Human responsibility remainsConfirm the scope and handling of customer data access, confirm the warranty and asset and authorization boundaries, and be accountable for work orders and billing and customer commitments.

Accountability must remain intact when AI enters professional workflows

The five steps below are the editorial process presented on this page, used to explain "who is responsible at which step"; they are not a mandatory process specified by the sources, and do not replace the employer's own safety and data and warranty and work order policy.

  1. Task input

    Clarify the work order scope and symptoms and customer authorization, and your own authorization boundary and escalation path for live work and data access and warranty and spare parts and billing.

  2. AI processing

    Only where the organization permits it and it has been validated with same-model materials and confirmed work orders, test tools for organizing fault codes, retrieving materials and drafting records; record the tool version, material source and time. Tool drafts must not be taken directly as test steps or as proof that the equipment is repaired.

  3. Human review

    Review by yourself together with the responsible parties: whether the symptoms and test results support the conclusion, whether disassembly and assembly and calibration and retesting meet the standard, and whether customer data access and warranty and authorization are compliant.

  4. Evidence documentation

    Document the symptoms and test data and replaced parts and retesting results and customer confirmation; handle data on customer equipment according to the minimum necessary and authorization requirements.

  5. Safety and authorization responsibility

    Have positions with the corresponding authority and qualifications confirm live work, data handling, and warranty and asset and billing conclusions; tools do not carry that responsibility and do not remove safety and compliance obligations.

Professional risks of using AI

Fictitious information or incorrect citation

Automatically generated diagnostic suggestions or material summaries may match a different model or version; replacing parts directly without verifying the actual machine and drawings or original manufacturer materials causes misrepair and repeat service calls.

Control: Rely only on the actual machine's symptoms and test data and the manufacturer's original materials; for uncertain points, retest and check the drawings first and retain the verification process and conclusion.

Confidential data leakage

Business data and personal information and account credentials on customer equipment are protected information, and uploading them to external services or chat tools may cause leakage and compliance risk.

Control: Choose available tools and work methods according to information classification and authorization, de-identify or avoid contacting identifiable information, and retain access and handling records.

Tool and model versions untraceable

When the part or firmware version given by remote diagnosis or the knowledge base does not match the actual equipment, acting on the suggestion without verification leaves the equipment still not working after parts replacement and makes it impossible to trace back.

Control: Fix verification of the model and serial number and firmware version as a human precondition, use tools only for retrieval and organization, and keep version and operation records.

Aggregated data concealing model and scenario differences

Drawing conclusions directly from automatically aggregated failure rate or spare parts data may conceal differences in model mix and operating environment and operation.

Control: State the model and batch and operating environment and statistical period clearly, annotate the applicable scope of the conclusions and retain the original records, and have repair quality conclusions confirmed by retesting and the customer.

Accountability vacuum and missing review

When the process is split into "the tool produces a conclusion, a person clicks confirm," a gap easily arises in which no one is accountable for whether the equipment is truly repaired and for customer data and the authenticity of work orders.

Control: Specify the executor, reviewer and approver of each step in the process, and make the records able to answer "who made this judgment and on what basis."

How should different audiences respond?

Students preparing to enter the field and career changers

Editor's suggestion: learn electronics fundamentals, disassembly and assembly, instrument reading and repair records under the guidance of qualified staff, applicable equipment procedures and authorization; paper exercises do not involve live operations. Diagnostic software and knowledge bases are aids only, and whether the equipment is repaired must still be retested and confirmed per the technical materials.

Positions responsible for on-site diagnosis

Use tools for organizing fault codes, retrieving technical materials and historical work orders, and drafting diagnostic records, but keep disassembly and inspection judgments, live-work risk judgments and replacement decisions with yourself and authorized staff, and be accountable for the diagnostic conclusion and customer communication.

Positions responsible for parts replacement and retesting

Editor's suggestion: test whether tools organize part models, compatibility materials and records accurately; disassembly and assembly, torque, calibration and retesting are still carried out per the specific model's technical materials and authorization. This page did not obtain measurement results showing that these tools improve repair efficiency.

Positions responsible for customer data and work orders and billing

Editor's suggestion: test whether tools accurately organize work orders, costs and customer explanation materials, and verify customer data access, warranty and asset authority; this page obtained no evidence of efficiency gains, and the use of external tools must meet the applicable data requirements.

Common questions about AI and career development

Will this line of work be replaced by AI?

It cannot be inferred that way. The core tasks of this occupation include on-site symptom judgment and disassembly and inspection, execution of live-work risk and safety procedures, parts replacement and retesting, and accountability for customer equipment data and work orders and billing; these steps depend on hands-on ability and safety authorization, and tools do not carry that responsibility.

Source: O*NET 49-2011.00 tasks and work activities; ILO exposure indexOriginal source ↗

Do you need to know how to code to enter this line now?

Writing code is not a uniform entry threshold proposed by this page on the basis of the O*NET tasks. The tasks include servicing electrical and mechanical parts, installation and configuration, customer communication and records; a software skills list is also not a programming requirement. Whether the target employer requires scripting, a degree, certification or specific model experience should be verified item by item against the job posting.

Source: O*NET 49-2011.00 tasks and work activities; O*NET technology list 49-2011.00Original source ↗

Which tasks are most affected by AI?

Editor's suggestion: treat fault code and log classification, material retrieval, work order drafts and spare parts list organization as testable assistive candidates; disassembly and inspection, safety judgments, assembly and calibration, retesting and customer data handling still require qualified personnel to handle them under the applicable procedures. Insufficient evidence: this page obtained no evidence on the actual order of adoption or replacement speed in these steps.

Source: O*NET 49-2011.00 tasks and work activities; ILO exposure indexOriginal source ↗

Will this occupation shrink by 2035?

The BLS Table 1.2 overall projection for 49-2011 in 2025—2035 shows employment declining 3.0%, with about 6,100 average annual openings. Openings include growth and replacement and are not net additions; this is an overall employment projection, not an AI attribution, and it is not equal to individual hiring probability.

Source: BLS Employment Projections Table 1.2 2025—2035 projection (occupational code corresponding to 49-2011.00)Original source ↗

Can AI replace disassembly and inspection and live-work risk judgment?

No. Live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality of personal information on customer equipment, and warranty and asset and manufacturer authorization and billing responsibility must be decided by positions with the corresponding authority and qualifications, in accordance with the applicable jurisdiction and employer policies; tools do not carry that responsibility and do not remove safety and compliance obligations.

Source: O*NET 49-2011.00 tasks and work activities; employer safety and data and warranty policyOriginal source ↗

In what year will this position disappear?

Insufficient evidence: this page obtained no reliable material supporting a disappearance year for this occupation, so no disappearance date is provided. The editorial suggestion is to observe the target employer's equipment types, remote diagnostic processes, spare parts arrangements and manual verification requirements, and to verify specific postings; these observation items do not equal a proven industry investment trend.

Source: Editor's note for this pageOriginal source ↗

Which AI skills should I learn first now?

Suggested priority order: first build solid skills in isolation and voltage testing and disassembly and measurement and records, then learn to use diagnostic software and knowledge bases as aids; at the same time limit the use of tools to material retrieval and fault code organization and record drafts, and do not use them to replace disassembly and inspection judgments, live-work risk judgments, retesting or customer confirmation.

Source: O*NET technology list 49-2011.00 (technology keywords); NIST AI RMF 1.0Original source ↗

Editorial judgment: fault codes, materials and record organization can serve as tool assistance candidates, but this page has no evidence quantifying the degree of change. Equipment safety, repair outcomes, customer data and warranty and billing responsibility must still be confirmed under the applicable rules by personnel with authority; hands-on work, on-site judgment and recording ability come from the occupational task requirements.

Chinese mainland salary reference

Mainland China wage reference

Occupational comparison: U.S. O*NET-SOC 49-2011.00 (Computer, Automated Teller, and Office Machine Repairers); for mainland China this evidence route did not establish a one-to-one corresponding occupational sub-class, and the related duties may be distributed across service engineer positions at equipment service enterprises and bank self-service equipment operations and outsourcing positions and equipment maintenance and information technology support positions in various units, and must be classified by actual duties and employer type; page language does not constitute occupational equivalence or a wage mapping.

Official statistical scope and gap notes

Duty and authorization boundaries: live electrical work and isolation and prevention of unexpected re-energization, access to and confidentiality and handling of personal information on customer equipment, and warranty and asset and manufacturer authorization and billing responsibility must be carried out by positions with the corresponding authority and qualifications, in accordance with the applicable jurisdiction and employer policies; this page does not present any training or overseas certification as a Chinese statutory qualification.

Exact scope for this occupation

Insufficient evidence: no national Chinese mainland median, percentiles or starting pay fully corresponding to Computer, Automated Teller, and Office Machine Repairers was obtained.

Repair enterprise industry reference (industry average, not occupational wages)

National Bureau of Statistics 2025 national urban unit annual average wages for "resident services, repair and other services": non-private units 70,226 yuan and private units 52,059 yuan, both pre-tax annual averages. This is the employee average for the entire industry category, not this occupation's median, an individual's take-home pay or a novice wage; the two unit types are listed separately and cannot be spliced into an occupational wage range. The statistics exclude sole proprietors and the self-employed. In GB/T4754-2017 category 812 "computer and office equipment repair" and 8121/8129 fall under resident services, repair and other services, which is suitable as a broad-scope background for enterprises specializing in computer and office equipment repair; positions inside banks, sales enterprises or units must be verified separately according to the employer's main activity and are not all classified under that category.

Recruitment and job postings (matching sample still to be obtained)

Recruitment quotations apply only to the position, region, period and pay structure in the posting; insufficient evidence: this page obtained no verifiable recruitment compensation sample for this occupation in mainland China and does not fill the gap with an industry average.

Which position directions do different educational backgrounds correspond to?

Insufficient evidence: no national Chinese mainland median, percentiles or starting pay fully corresponding to Computer, Automated Teller, and Office Machine Repairers was obtained. National Bureau of Statistics 2025 national urban unit annual average wages for "resident services, repair and other services": non-private units 70,226 yuan and private units 52,059 yuan, both pre-tax annual averages. This is the employee average for the entire industry category, not this occupation's median, an individual's take-home pay or a novice wage; the two unit types are listed separately and cannot be spliced into an occupational wage range. The statistics exclude sole proprietors and the self-employed.

Educational background, position directions and notes (editorial compilation, not salary statistics)
Educational backgroundPosition directionNotes and verification suggestions
A high school or secondary vocational qualification with electronics or computing foundationsManufacturer service branches, equipment sales and service enterprises, and bank self-service equipment operations and outsourcing providersEditor's suggestion: verify the target position's education and electronics or computing foundation requirements and the employer and equipment object; this page obtained no recruitment sample proving a uniform common education condition in China and cannot infer income from it.
Practical records of assembly and disassembly and inspection and testing and work order recordsOn-site repair and fault localization direction, component-level repair and testing directionEditorial summary: different directions value the corresponding hands-on and troubleshooting and recording abilities more; this page does not map education directly to an income range.
Manufacturer equipment training and electrical and data confidentiality related training or certificationInstallation and configuration and customer support direction, equipment and spare parts and warranty management directionEditor's suggestion: verify the specific manufacturer training, certification and job authorization requirements; whether they are recruitment conditions must be read from the employer's posting, and not all training is called a universal component.
Live work and data confidentiality and warranty and asset requirementsData handling and warranty and asset and compliance support directionEditorial summary: handling related to data and safety and warranty must follow the applicable regulations and employer policies; this page does not present any training or overseas certification as a statutory qualification.

When comparing opportunities, verify the employer's main activity, service object, employment form, travel, on-call and pay composition; the industry reference on this page fits only repair enterprises and does not represent income in all kinds of repair positions.

Which industries and directions use this occupation?

Manufacturer service branches and equipment sales and service enterprises

Editorial summary: mainly on-site or on-site-resident repair and warranty service per work order, usually scheduled according to dispatch and response time requirements.

Bank and financial self-service equipment operations and outsourcing services

Editorial summary: mainly self-service equipment availability and response time and safety compliance, delivered according to contract and regulatory requirements.

Equipment maintenance and information technology support positions in various units

Editorial summary: mainly maintaining the computers and office equipment in use by internal users, carried out according to internal policy and budget processes.

Will AI affect wages in this line of work?

Editor's suggestion: verify how the specific employer's diagnostic, knowledge base and spare parts processes change the tasks. Insufficient evidence: this page obtained no measurement or causal material on how these tools change wages for this occupation in mainland China; an industry wage average cannot prove an AI effect.

U.S. salary reference (BLS May 2025 wage data)

U.S. computer, automated teller and office machine repairer wage and employment data?

BLS 49-2011: May 2025 annual median 47,810 USD; 72,100 U.S. jobs in 2025, 69,900 projected in 2035 (−3.0%); 6,100 annual openings. This page uses the United States row. To consult the local wage, select a state or enter a ZIP code in the O*NET wage tool; the state tables list local metro areas.

U.S. wage distribution

U.S. wage distribution
Wage statistical positionAnnual wage referenceConversion boundariesHow to understand this position
The 10th percentile35,910 USD/year (10th percentile; hourly 17.26 USD)Official conversion, not personal monthly incomeThis row is a reference point at the lower end of the distribution: 10% of employed workers earn no more than 35,910 USD per year; it describes a statistical position, is not starting pay on entry, and does not correspond to a particular experience level.
The 50th percentile47,810 USD/year (median; hourly 22.99 USD)Not personal monthly income47,810 USD/year (median); a percentile is a statistical position, not personal income.
The 90th percentile71,730 USD/year (90th percentile; hourly 34.49 USD)Official conversion, not personal take-home payThis row is a reference point at the upper end of the distribution: 10% of employed workers earn at least 71,730 USD per year; it describes a statistical position, does not represent the maximum wage or a particular grade, and does not represent the pay level of a particular employer.

Pay · 10th percentile:35,910 USD/year (10th percentile; hourly 17.26 USD);This figure is the BLS May 2025 wage data displayed on the O*NET page; the 10th percentile means 10% of employed workers earn no more than this value per year, which describes a position in the distribution, is not starting pay on entry, and does not correspond to a particular experience level.;O*NET national wage table (BLS OEWS data) (49-2011.00)

Pay · 25th percentile:38,900 USD/year (25th percentile; hourly 18.70 USD);The 25th percentile is the lower quartile of the distribution; this statistic covers national occupational employees, excludes self-employed and owner income, and cannot be used to derive personal income.;O*NET national wage table (BLS OEWS data) (49-2011.00)

Pay · median:47,810 USD/year (median; hourly 22.99 USD);This figure is the national May 2025 wage median (sourced from Bureau of Labor Statistics 2025 wage data); the median describes the midpoint of the occupational population and is not equal to entry-level pay or starting pay.;O*NET national wage table (BLS OEWS data) (49-2011.00)

Pay · 75th percentile:59,870 USD/year (75th percentile; hourly 28.78 USD);The 75th percentile together with the 25th percentile is used to understand the dispersion of the distribution; it does not represent a definition of skilled or senior positions, nor the pay structure of a particular employer.;O*NET national wage table (BLS OEWS data) (49-2011.00)

Pay · 90th percentile:71,730 USD/year (90th percentile; hourly 34.49 USD);The 90th percentile describes the upper end of the distribution; figures across regions and periods are not directly comparable, and when querying state and metropolitan area wages the region and period and units must be retained together.;O*NET national wage table (BLS OEWS data) (49-2011.00)

How should the wages of this U.S. occupation be understood?

Is the median entry-level pay?

No. The median describes the midpoint of the occupational population, and no percentile is starting pay on entry; entry pay also depends on region and employer type and equipment brand and certification and on-call and travel arrangements.

Can the hourly wage be used to derive personal annual pay?

OEWS usually converts between hourly and annual wage statistics at 2,080 hours per year; this is a statistical assumption, not an individual's actual paid hours. Without contracted hours, overtime, on-call and allowance conditions, the hourly wage cannot be extrapolated into an individual's annual, monthly or after-tax income.

Where do the percentiles and median come from?

This figure comes from the BLS May 2025 wage data displayed on the O*NET page (national occupational employee scope); a percentile is a statistical position and does not represent an individual ability level or the pay structure of a particular employer.

Which conditions affect actual income?

Region and industry and employer type and equipment brand and certification and on-call and travel arrangements all affect actual income; this page does not predict personal income.

U.S. industry employment structure and the wage breakdown gap

U.S. industry employment structure and the wage breakdown gap
IndustryIndustry employment share (O*NET industry distribution)How to understand this value
Retail tradeRetail trade employment share 28% (current O*NET industry structure; verified 2026-10-10)This row is an employment share, not industry wages; the O*NET page for this occupation does not provide industry-specific median wages.
Wholesale tradeWholesale trade employment share 29% (current O*NET industry structure; verified 2026-10-10)This row is an industry employment structure share, not industry wages. Travel, on-site work and compensation arrangements for target wholesale channel positions should be verified against the contract and job posting.
Other services (except public administration)Other services (except public administration) employment share 17% (current O*NET industry structure)Other industries 26%, including professional, scientific and technical services, which the source names without a separate share. These figures describe employment, not wages.
Industry and regional wage breakdownsInsufficient evidence: the O*NET page for this occupation provides only industry employment shares, not industry median wagesWhen source-supported industry wage figures are missing, this page does not substitute industry averages or adjacent-occupation data; for comparison consult the OEWS industry and area query entry.

Which factors really affect wages and income in this line of work?

Region and industry and employer type

This occupation's industry structure is concentrated in retail and wholesale and equipment services, and travel and on-call arrangements differ greatly between manufacturer service branches and third-party service providers; wages and employment should therefore be queried separately by region and industry and employer type; this page publishes only national figures to avoid writing one region's or one employer's result as a general level.

Dispatch and response time and on-call and emergency repair rhythm

The page's work context shows 64% face strict deadlines every day, 33% are in an enclosed vehicle or operating enclosed equipment every day, 22% are exposed daily to minor burns and cuts and bites or stings, and 18% are exposed to hazardous conditions every day; dispatch and response time and on-call and emergency repair significantly affect the pace in stages.

Region and service branches and employer type

The industry shares describe the U.S. employment structure for this occupation and do not provide the relationship between local branch density and income. This page does not infer city opportunities or personal income from structure shares; regional wages and specific working arrangements must be verified separately.

U.S. employment outlook

Career fit guide

For this line of work, which interests, abilities and ways of working matter more?

Editorial judgment: willingness to work to procedure, retest and record, and explain problems to customers are observable fit signals. RC is this occupation's interest indicator, not the distribution of practitioners, and does not determine individual fit.

You may be better suited to: People willing to work to procedure and retest and record the results, willing to face customers and explain problems clearly, and willing to hold to safety steps even under pressure to close work orders.

These situations call for caution: People who tend to replace parts directly from experience, are unwilling to record and retest, or would look at and retain data on customer equipment at will.

Do an entry exercise once: Use MR-11 and W-MR to identify the reported symptom and missing evidence. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question.

Do not let one test decide your career

Holland occupational interest model (RIASEC)

Evidence level: O*NET interest codes and work activities are official occupational assessment data describing this occupation's interest indicators, not a personal fit conclusion and not a hiring standard.

Which Holland interest type suits this line of work better?

The interest code on the O*NET page for this occupation is RC (Realistic, Conventional): the interest scores published on the page are Realistic 81, Conventional 75, Investigative 28, Enterprising 13, Social 13, Artistic 0. Realistic corresponds to hands-on work and on-site work, Conventional to working by procedure and records; the work activities for this occupation are led by repairing and maintaining electronic equipment (87), making decisions and solving problems (86), updating and using relevant knowledge (85), using computers (82) and obtaining information (80); the interest code describes this occupation's interest indicators, not a personal fit conclusion.

  • Fit signal: you are willing to order the tests by symptom and treat "isolate and verify voltage before touching anything" as a habit rather than a nuisance.
  • Fit signal: you can accept explaining things to customers who do not understand the technology and writing work orders and records completely.

Do not use it this way: Caution: the occupation page lists work styles (impact scores: attention to detail 83, dependability 80, caution 66, persistence 53, integrity 52, and so on); from the tasks and work context, if you tend to replace parts directly from experience or are unwilling to record per procedure, this work will keep producing misrepairs and repeat service calls and billing disputes.

Test my Holland occupational interests

Five-factor personality model (Big Five)

Evidence level: the O*NET page for this occupation provides a work styles list (given as impact scores); the Big Five scale itself is not an occupational selection tool.

Which Big Five traits are more relevant to this job?

The Big Five is used on this page only to describe ways of working and not as a hiring basis. More relevant to this occupation's tasks are the conscientiousness dimension's procedural and record and closure behavior, the emotional stability dimension's handling of customer complaints and urgent dispatches, and the openness dimension's learning of new models and new systems; these traits affect how you advance the work, not whether you can learn the tools and techniques.

  • Fit signal: you habitually write the symptoms and test data and replaced parts and retesting results into the work order.
  • Fit signal: you can accept a work pattern shown by the page's work context of 40% standing continuously or almost continuously, 71% using hands to handle objects and tools continuously or almost continuously, 33% being in an enclosed vehicle or operating enclosed equipment every day, and 22% being exposed daily to minor burns or cuts or stings.

Do not use it this way: Caution: skipping isolation and voltage testing or retesting to close work orders quickly, or looking at and retaining data on customer equipment at will, creates safety and compliance and warranty liability risk at the same time.

View my Big Five personality traits

Myers-Briggs Type Indicator (MBTI)

Type-based tools such as the MBTI have no official evidence supporting fit with this occupation. This page does not use the phrasing "which type suits Computer, Automated Teller, and Office Machine Repairers best": typology describes preferences, does not predict repair quality, and does not correspond to position admission.

Which MBTI type suits this line of work best?

Interest orientation: the occupation page's interest code is RC (Realistic, Conventional), and the daily tasks are mainly on-site diagnosis and fault localization, parts replacement and retesting, and installation and configuration and customers and records.

  • Fit signal: if you enjoy "making non-working equipment work" and explaining the process clearly, this job will give you a sense of achievement.
  • Fit signal: if you would rather be stationed long term at one organization, the internal equipment maintenance and support direction can likewise be developed over the long term.

Do not use it this way: Caution: MBTI type is not a recruitment condition, and this page provides no advice on screening positions by type.

Understand my MBTI preferences

Enneagram

Evidence level: an editorial note, not an occupation fact supported by the sources.

Which Enneagram type suits this line of work better?

Use MR-11 and W-MR to identify the reported symptom and missing evidence. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question.

  • Fit signal: willingness to verify yourself by "doing one troubleshooting and retesting record and asking a technician to review it" rather than "saying you can repair things."
  • Fit signal: you can take the initiative to correct after a missed test or misjudgment is pointed out and form a habit of verification.

Do not use it this way: Caution: Enneagram interpretations easily slide into personality diagnosis, and this page does not use it to judge fit.

Explore my Enneagram pattern

Intelligence quotient (IQ) and numerical reasoning

Evidence level: O*NET skills, knowledge and abilities are occupational description data. The IQ assessment on this page sets no admission threshold for this occupation; whether the target employer uses cognitive tests or other selection must be verified against the specific posting and rules.

If I am not good at IQ tests or math, can I do this line of work?

This occupation has a clear composite requirement for electronics and mechanics and customer service: the O*NET knowledge list is led by computers and electronics 88, customer and personal service 82, mechanical 77, English language 73, engineering and technology 67, communications and media 64; the ability list is led by near vision 72, oral comprehension 69, oral expression and problem sensitivity (both 66), finger dexterity and speech clarity and speech recognition and written comprehension (all 63); the skills list is led by active listening 66, critical thinking 63, oral expression 56, reading comprehension 53, active learning and monitoring and writing (all 50).

  • Fit signal: you can diagnose mechanical faults and electrical faults separately rather than replacing the most expensive part first.
  • Fit signal: you are willing to use checklists and logs to manage parts and tools, leaving your attention for judgment and customer communication.

Do not use it this way: Caution: relying on personal memory over the long term without consolidated model and fault and replacement records will expose risk during handover, warranty disputes and repeat service calls; fixing the process and the documentation is the sustainable approach.

Understand my intelligence and reasoning performance

Emotional intelligence (EI, commonly called "EQ")

Evidence level: O*NET work activities and work context are official occupational data; this page draws no causal conclusion about the relationship between emotional intelligence and occupational performance.

Does this line of work need high emotional intelligence?

This occupation has considerable communication and on-site service requirements: the page's work context shows 94% have telephone conversations every day, 76% have face-to-face discussions every day (11% never), 63% consider dealing with external customers or the public extremely important (13% very important), 36% have sustained contact with others, 13% face conflict situations every day (42% at least weekly but not daily), and 16% deal at least weekly but not daily with unpleasant or angry or discourteous people; both remote guidance and on-site communication depend on turning technical language into something the customer can understand.

  • Fit signal: you can explain "symptoms caused by how the customer uses it" separately from "a fault in the equipment itself" and give recommendations.
  • Fit signal: you are willing to complete isolation and voltage testing and retesting even under pressure to close work orders, rather than omitting steps.

Do not use it this way: Editor's reminder: omitting safety steps or retesting under response time pressure may affect personal safety, equipment outcomes and delivery responsibility. This page contains no statistics on the frequency of these behaviors or a ranking of danger levels.

Understand my emotional intelligence ability

Which direction are you more likely suited to?

Office machine operators (except computer)

Fits better when: Suitability signal: willingness to operate equipment per procedure and ensure output and quality.

Watch for: That direction focuses on office machine operation, cleaning and minor repairs; major repair needs are escalated. It differs from this occupation's emphasis on equipment diagnosis and repair, and the specific division of disassembly and parts replacement should be verified against the position's authorization rather than asserted uniformly as no repair.

Explore related career: Office machine operators (except computer)

Coin vending and machine servicers and repairers

Fits better when: Suitability signal: willingness to maintain coin-operated and amusement equipment in public places and handle collection matters.

Watch for: Caution signal: that direction's object and scope of authorization differ from office equipment, and the technical requirements are not entirely transferable.

Explore related career: Coin vending and machine servicers and repairers

Equipment installers (audio-visual equipment installation and repair)

Fits better when: Suitability signal: willingness to install, wire, rig and commission audio-visual equipment.

Watch for: Caution signal: audio-visual equipment installation and repair involves different equipment and system knowledge; verify whether the target position carries fault diagnosis, wiring and installation, and do not assume the repair share is small.

Explore related career: Equipment installers (audio-visual equipment installation and repair)

Electrical and electronic equipment installers and repairers

Fits better when: Suitability signal: interest in installing, testing or repairing the particular electrical or electronic equipment in the job posting.

Watch for: Caution signal: electrical and electronic equipment installation and repair is a broad occupational scope with different equipment and jurisdictions; verify voltage, industrial equipment, safety training and licensing requirements item by item, and do not treat all directions as building high-voltage construction.

Explore related career: Electrical and electronic equipment installers and repairers

Computer support specialists

Fits better when: Suitability signal: willingness to provide remote or on-site support for operating system and account and desktop issues.

Watch for: Caution signal: support positions cover user or network support and may also install and maintain hardware; if moving into that direction, verify the actual division of software, account, network and hardware tasks.

Explore related career: Computer support specialists

Computer network support specialists

Fits better when: Suitability signal: willingness to configure and troubleshoot network devices and servers.

Watch for: Caution signal: that direction is mainly network and system authority, and the equipment type and work environment differ.

Explore related career: Computer network support specialists

Career fit questions

What kind of personality is better suited to this line of work?

No. Reducing an occupation to "the one most suitable personality" conceals real differences: how work is done at manufacturer service branches differs greatly from bank self-service equipment outsourcing providers and internal maintenance positions. A more useful approach is to validate with one deliverable troubleshooting and retesting and work order exercise. How can I identify the work focus in a job posting? Field service prioritises visits and coordinates restoration times with customers. Bench repair replaces parts, reassembles machines, tests the fix, and updates the work order. Compare emergency callouts with bench service and check replacement authority.

Are introverts suited to this line of work?

Introversion by itself cannot determine fit. O*NET task requirements include confirming faults with customers, explaining equipment operation and maintaining records; the telephone and on-site communication frequencies describe occupational respondents, not a requirement on an individual's social style. The editor suggests observing communication effectiveness through one task of explaining a fault and handing over records; protective equipment and vibration exposure shares cannot prove an introvert advantage.

Can extroverts do this line of work well?

Yes. Extraversion itself is neither an advantage nor a disadvantage; what matters is whether you can explain the fault and the solution clearly and get the customer to accept it; if you prefer dealing with people, you can focus on customer training and on-site service and branch support tasks.

Which MBTI type suits this line of work best?

There is no official evidence supporting that a particular MBTI type suits this occupation better; this page provides no such ranking.

Which Holland interest type suits this occupation better?

The interest code on the O*NET page for this occupation is RC (Realistic, Conventional). This means the occupation scores higher on the R and C interest indicators, but the code is not a personal fit conclusion and still requires validation with actual tasks.

Can personality trait scores predict job performance in this occupation?

No. The association between personality trait scores and job performance varies in strength across studies and is affected by employer and equipment type and branch conditions; this page does not use it as a basis for hiring or fit judgments.

Can I do this line of work if I am not good at math?

In the O*NET ability table, number facility is 25 and mathematical reasoning 22; these are occupational ability indicators and cannot be converted into a personal mathematics threshold. Repair tasks require reading instruments correctly, understanding units and checking hours and costs; the editor suggests using these tasks to check your own quantitative ability, and which calculations the target model involves must be verified against the technical materials and employer requirements.

Does this line of work need high emotional intelligence?

This occupation places prominent demands on customer pressure and safety procedures: the page's work context shows 13% face conflict situations every day (42% at least weekly but not daily), 16% deal at least weekly but not daily with unpleasant or angry or discourteous people, 64% face strict deadlines every day, 18% are exposed to hazardous conditions every day (37% never), and 51% consider the consequences of error serious (15% fairly serious, 24% not at all serious); making "isolate and verify voltage first, then judge, then retest" a habit is a skill that can be practiced.

Can the Enneagram be used to judge whether I am suited?

Not recommended. The Enneagram is not an occupational assessment tool and has no official occupational fit evidence.

How do I use deliverables to judge which direction suits me?

Use MR-11 and W-MR to identify the reported symptom and missing evidence. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question. What should I ask in an interview? If I cannot restore a machine on site, can I take it back for repair, and who confirms the interim arrangement?

Work pressure, risks and occupational boundaries

What pressures, risks and occupational boundaries does this line of work involve?

Direct answer: the risks this occupation most needs to judge in advance come from three places — electric shock and equipment damage from live work and electrical injury, privacy and compliance liability from viewing or retaining data on customer equipment, and equipment damage and billing disputes from misdiagnosis and repeat repairs; exceeding warranty and asset authorization, on-site travel and workstation load, and inconsistencies between parts and inventory and work order records will amplify these three types of risk.

Evidence scope: O*NET supports the U.S. occupational tasks and work context; OSHA publications support general safety principles for electrical hazard control; Articles 5, 6, 9, 13 and 14 of the Personal Information Protection Law support the boundaries of lawfulness, necessity, security and processing basis in mainland China. The six specific scenarios, consequences and verification actions are editorial compilations; accident rates, contract warranty and the specific safety procedures for particular models were not verified and must be confirmed with the employer or qualified personnel.

01

Live work and electrical injury

Typical scenario:Not isolating to save time; checking only the switch position without verifying voltage; treating live measurement as routine; lacking personal protection and tool checks.

Roles most affected:Positions responsible for live work and electrical checks

Possible consequence:Disassembling and inspecting electrical parts without isolating per procedure or preventing unexpected re-energization may cause electric shock and secondary equipment damage and affect personal safety.

How to reduce risk:Editor's verification suggestion: before disassembly, confirm with qualified personnel the isolation, lockout and prevention of unexpected re-energization procedures, test instruments and protection requirements for the applicable model. OSHA publications provide only general principles, and this page did not obtain model-specific voltage verification, discharging or re-energization procedures; do not operate without training or authorization, and do not treat a diagnostic need as a live-work permit.

Evidence:O*NET-SOC 49-2011.00 detailed occupational information · OSHA:Controlling Electrical Hazards

02

Customer equipment data and privacy

Typical scenario:Casually browsing customer files or photos; connecting equipment to a personal account; leaving identifiable data on a personal computer or in external tools.

Roles most affected:Positions that come into contact with customer equipment data

Possible consequence:Viewing, copying or retaining customer personal information without a lawful processing basis or beyond the scope necessary for the repair may cause privacy and compliance risk and harm trust. Lawful and necessary processing must still follow purpose, scope and security requirements; business data is verified separately against the contract and confidentiality policy.

How to reduce risk:Editor's verification suggestion: contact data only within the lawful basis, the clearly defined purpose and the minimum necessary scope; before backing up or resetting, explain the scope and data risk to the customer and verify the lawful processing basis and authorization against the work order and organizational procedures. Article 13 of the Personal Information Protection Law provides several lawful bases, and Article 14 requires written consent only where the law requires it, so not all repairs should be written as requiring statutory written consent.

Evidence:O*NET-SOC 49-2011.00 detailed occupational information · Personal Information Protection Law of the People's Republic of China

03

Warranty and asset and authorization responsibility

Typical scenario:Replacing parts first and backfilling authorization later; filling in work outside the warranty scope on a warranty form; not recording modifications and broken seals.

Roles most affected:Positions responsible for warranty and asset and authorization judgments

Possible consequence:Replacing parts or modifying beyond the work order and customer, asset or manufacturer authorization may cause contract and billing disputes; whether warranty is affected must be verified against the actual warranty terms, and it cannot be asserted unconditionally that non-original parts void the warranty.

How to reduce risk:Carry out the work within the work order and customer authorization and warranty and asset responsibility scope; for matters beyond authorization (non-original parts, modifications, unauthorized access), apply first and then act; document the authorization scope and exceptions and the customer's confirmation.

Evidence:O*NET-SOC 49-2011.00 detailed occupational information · O*NET-SOC 49-2011.00 work context fields

04

On-site travel and workstation and physical load

Typical scenario:Driving while fatigued to meet response times; lifting heavy equipment alone; maintaining the same posture for long periods; omitting protective equipment.

Roles most affected:Positions that carry on-site travel and physical and workstation load

Possible consequence:Frequent travel and lifting equipment and long periods of standing and bending bring traffic accident risk and musculoskeletal and repetitive strain injuries.

How to reduce risk:Plan journeys according to dispatch routes and working hours and avoid driving while fatigued; use aids and correct posture when lifting and ask for help; adjust workstation and tool heights and change posture periodically; wear common protective equipment as required.

Evidence:O*NET-SOC 49-2011.00 work context fields · O*NET-SOC 49-2011.00 detailed occupational information

05

Misdiagnosis and repeat repairs

Typical scenario:Reaching a conclusion when the symptom does not reproduce; not doing a control test; retesting only for "it powers on" without checking performance and stability.

Roles most affected:Positions responsible for diagnosis and replacement decisions

Possible consequence:Replacing parts directly from experience or handing over without completing retesting causes misrepairs and repeat service calls and equipment damage and affects the customer and billing.

How to reduce risk:Turn the customer's description into testable hypotheses and rule them out item by item with instrument or diagnostic software results; distinguish mechanical from electrical faults and avoid replacing parts first from experience; retest and calibrate to specifications and write the test data into the work order.

Evidence:O*NET-SOC 49-2011.00 detailed occupational information · O*NET-SOC 49-2011.00 work context fields

06

Parts inventory and work order and billing records

Typical scenario:Replacing the part first and backfilling paperwork later; not investigating inventory discrepancies; masking repeat repairs with a new work order; expense reports that do not match the actual journey.

Roles most affected:Positions responsible for parts and inventory and work order billing

Possible consequence:Parts requisition and inventory and ordering records that do not match the actual replacements cause cost and inventory distortion and affect warranty and billing and audit.

How to reduce risk:Register requisition and replacement and return according to the actual actions and retain the old parts or handling records; complete bills and time cards and expense reports according to the facts; record repeat repairs and second visits separately with the reason and do not mask the same fault with a new work order.

Evidence:O*NET-SOC 49-2011.00 detailed occupational information · O*NET-SOC 49-2011.00 work context fields

Entry, qualifications and career development

How do you become a computer, automated teller and office machine repairer? Entry, qualifications and career development path

The U.S. O*NET lists this occupation as Job Zone 1-2; BLS Table 1.2 for SOC 49-2011 gives the typical entry education as some college but no degree, no related experience, and short-term on-the-job training. O*NET also lists 4 registered apprenticeship title examples. The editor suggests preparing electronics foundations, disassembly and assembly and testing and work order records in a guided and authorized environment, and then verifying the target employer's conditions; the three directions and four stages below are capability development suggestions, not the most common entry route or a uniform promotion sequence.

How new graduates and career changers can validate their fit and get started

Repair capability stages and adjacent management duties (editorial compilation)

Capability stage / role positionMain tasks and outputsSuggested capability evidence to verifyPractice using this page’s recordsDifference from other directions
Apprentice and repair assistant (under guidance)Complete work order intake and disassembly and assembly and cleaning and parts replacement support and work order completion under guidance.Whether isolation and voltage testing are carried out, whether the disassembly and assembly sequence is correct, whether records are complete, and whether anomalies are reported promptly.List the observed scope of the two fictional calls and what the records do not establish.Compared with the independent repair position, it does not carry responsibility for the diagnostic conclusion and the replacement decision.
Independent repair position (common models)Independently complete on-site diagnosis and parts replacement and retesting and calibration for common models.Whether the symptoms and test data support the conclusion, whether the retest meets the standard, and whether the customer has knowingly confirmed.Write one evidence request and next responsible role for each call.Compared with the difficult case handling position, it does not carry responsibility for volume and self-service equipment and cross-model difficult cases.
Difficult case handling and mentoring position (cross-model and self-service equipment)Handle difficult and high-volume and self-service equipment on-site problems and mentor newcomers.Difficult case localization methods, retesting and calibration quality, mentoring and safety demonstration.Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question.Compared with adjacent management or policy positions, the focus is technical difficult cases and mentoring; whether the role is responsible for spare parts or standards must be verified by specific position.
Service standards and spare parts and safety positionParticipate in building service standards and spare parts and warranty and data handling and safe work systems.Policy documents and implementation, spare parts and warranty and data handling practice, safety training coverage.List the observed scope of the two fictional calls and what the records do not establish.Compared with front-line repair positions, it focuses on standards and governance rather than a single work order.
Service branch manager (team and budget)Responsible for coordinating branch people and spare parts and vehicles and customer service and safety and billing.Branch indicators and costs, customer satisfaction, safety incidents and compliance and audit results.Write one evidence request and next responsible role for each call.Compared with the difficult case handling position, it adds responsibility for people and vehicles and budget and external commitments.

Occupational evidence and employer conditions to be verified

Preparation level and typical education

The U.S. O*NET Job Zone1-2 and an SVP below 6.0 are generic preparation level descriptions, not the occupational education distribution; the page also lists 4 apprenticeship title examples.

The typical entry education in the BLS 2025—2035 table is some college but no degree, no related experience, short-term on-the-job training.

Position authorization verification suggestions

Editor's suggestion: verify safe work, work order records, customer data access and equipment work authority item by item; specific manufacturer training, background checks and safety procedures must be taken from the target employer's own texts.

Insufficient evidence: this page obtained no employer recruitment, background check or model authorization text for self-service equipment or branded equipment.

Occupational abilities and work styles

O*NET work style impact: attention to detail 83, dependability 80, caution 66, persistence 53, integrity 52; knowledge includes computers and electronics 88, customer and personal service 82, mechanical 77, English 73.

Work activities are led by repairing and maintaining electronic equipment 87, making decisions and solving problems 86, and updating knowledge 85.

Tools and hiring skill signals

The O*NET task list mentions oscilloscopes, measurement and diagnostic software, tools and parts repair; the specific model tools, protection and handling requirements must be read from the technical materials.

The 2025 U.S. hiring skill mention page currently lists 17 items, Office6%, Excel5%, Outlook3%, Linux1%; this is not AI adoption, proficiency or a uniform employer hiring condition.

MR-11: Triage Two Equipment Service Calls

Materials: fictional MR-11 (about 10 minutes)

M1: one office printer rejects a queued job; the same document prints on another device. No printer event log or inspection record is supplied.

M2: a cash terminal is marked out of service. Only the owner’s authorized team can enter its protected compartments; the call contains no dispatch approval.

Use paper only; no equipment access, cash handling, commands or customer data.

Task and deliverable

Record the observed scope, one next evidence request and the authorized owner for each call.

Do not infer a fault or repair that the records do not establish.

Answer key

M1 affects one reported device and job. Ask the printer service team for the event record and an approved comparison. This does not prove a mechanical fault.

M2 needs owner dispatch and authorized service; record the outage and escalate without opening the unit. No access or repair is proven.

Self-check rubric

Check symptom, evidence, next owner and no unsupported action.

Use no real devices or customer data.

Portfolio and evidence preparation

MR-11: incident comparison

List the observed scope of the two fictional calls and what the records do not establish.

Cite the detail from each call.

MR-11: evidence request

Write one evidence request and next responsible role for each call.

Keep owner approval separate from a repair conclusion.

W-MR: paper service handoff

Use the two supplied tickets to separate symptoms and evidence gaps. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question.

Self-check each line against the record.

Materials

Use only the fictional records on this page. No real device, customer data, cash, test or authorization is needed.

Check your notes against the materials yourself; a second reader is optional.

Recruiting, probation and authorization boundaries

StageWhat may be assessedObserved evidenceLimits of use
Resume and initial screeningWhich models you have repaired, your role, first-time fix and repeat repair situations, and whether you have live work and data handling training records.Whether the experience matches the position's equipment type, and understanding of safety procedures and records and customer communication.Initial screening sees only written information; live work and manufacturer authorization requirements must be verified against employer and manufacturer rules.
Interview and scenario questionsThe cause analysis and correction of a misrepair or second visit; how you would hold to safety steps under customer complaints or deadline pressure.Whether you can explain causation and trade-offs clearly and state your own responsibility and limits truthfully.Interview performance is not the same as long-term repair quality; employers usually have a separate probation and assessment period.
Hands-on and retesting assessmentComplete disassembly and inspection and testing and replacement and retesting on a given device or simulated fault and complete the work order.Safety steps, test sequence, assembly and calibration, retesting data, work order record quality.Assessment devices differ in complexity from real models; results are for reference and not conclusive.
Probation or work-order shadowing periodTake on specific dispatches under the lead of a technician or supervisor and undergo safety and quality and record checks.Whether the person isolates and verifies voltage and records per procedure, reports problems promptly, and first-time fix and repeat repair situations.Performance during the shadowing period is not the ceiling of long-term ability; employer and equipment type and dispatch structure have a large influence.

Seven-day paper trial: a separate case

  1. 01

    Day 1

    Start W-MR: two print jobs from one device fail; the same jobs work on an alternate device. Record the comparison.

  2. 02

    Day 2

    The service record says the device is assigned to a vendor, but no current dispatch is attached. Mark the evidence gap.

  3. 03

    Day 3

    Add a new ticket: a shared computer reports that a peripheral is not detected; no test result is supplied. Separate the two cases.

  4. 04

    Day 4

    List one permitted evidence request for each ticket.

  5. 05

    Day 5

    Draft both paper handoffs. Name a responsible role when the ticket supports it; otherwise mark the owner pending and say what you would ask.

  6. 06

    Day 6

    If starting today, read days 1–3 and draft a two-row handoff. Check scope, evidence and known or pending authority yourself. A second reader is optional.

  7. 07

    Day 7

    Review or redo one case and pick a service skill to practise.

Judgment questions after seven days

  • Can trace a claim to a specific record.
  • Can separate what matches from an evidence gap.
  • Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question.
  • Uses only fictional materials.
  • Can revise an earlier judgment after checking.
  • Can describe which part of the work was engaging.
  • Choose one skill to practise next.

Qualification choices

Qualification / statusMainly suits whomPractical role in job seekingWhether it is a universal entry thresholdApplication / registration conditionsLevel of investmentImportant limits
A high school or secondary vocational qualification with electronics or computing foundationsMost entrantsVerify the target employer's education and foundation requirements; a uniform recruitment threshold cannot be inferred from the preparation levelNot a uniform threshold set by this page; verify the target posting separatelyComplete the studies or equivalent training and pass the employer's assessmentVerify against the course, institution or employer conditionsThe O*NET high school/GED text is a Job Zone group description, not the occupational education distribution; BLS lists some college but no degree for 49-2011.
Hands-on experience in disassembly and assembly and testing and work order recordsPeople who carry out repair workAffects the range of models one can take on and whether one can run work orders independentlyNo (it is an ability condition)Accumulated through dispatches and first-time fix rate and repeat visit rate and customer feedbackVerify against the course, institution or employer conditionsHands-on experience is the foundation for taking on diagnosis and replacement responsibility, but it is not equal to live work authorization.
Manufacturer training and professional certification (8 examples listed in the U.S. entry)People who want to demonstrate professional abilityAs proof of model and service capabilityNo (a certification is not equal to manufacturer authorization or a live electrical work permit)Verify education, experience, examination or renewal requirements under each certification body's current conditions; this page did not obtain them item by itemVerify against the course, institution or employer conditionsO*NET displays 8 candidate certifications from CareerOneStop; a certification is not equal to a degree, an employer appointment, manufacturer authorization or a work permit.
Live work and safe work authorizationPeople who need to disassemble and inspect electrical partsDetermines which parts may be touched and in what state work may be performedThe applicable task must be verified against its lawful basis and authority; it is not a uniform occupational certificateTrain and authorize under employer and manufacturer requirementsVerify against the course, institution or employer conditionsAuthorization for live and isolated work is a hard precondition, and the specific standard must be confirmed with the employer and manufacturer and applicable regulations.
Customer equipment data access and handling authorizationPeople who come into contact with data on customer equipmentDetermines which data may be accessed and handledThe applicable task must be verified against its lawful basis and authority; it is not a uniform occupational certificateCarry out and obtain authorization under employer policy and applicable regulationsVerify against the course, institution or employer conditionsData access and handling must follow the minimum necessary and confidentiality requirements; this page does not replace compliance and legal judgment.
Warranty and spare parts and billing authorizationPeople involved in spare parts requisition and warranty determination and billingDetermines which parts may be replaced and how billing is doneThe applicable task must be verified against its lawful basis and authority; it is not a uniform occupational certificateApply and obtain approval under employer and manufacturer policyVerify against the course, institution or employer conditionsWarranty and spare parts and billing authorization is determined by employer and manufacturer policy; this page does not replace specific judgments.

Qualification and exercise boundaries

How to use the recruitment sample

On-site repair and fault localization direction

01

Follow work orders and assist with disassembly and inspection under guidance

Typical scope:Complete work order intake and disassembly and assembly and cleaning and parts replacement support and record completion under guidance.

Readiness evidence:Can present a reviewable work order and replacement and test record.

Credential boundary:Editor's suggestion: first verify the target position's education and electronics or computing foundation requirements.

Next moves:Make a fixed checklist of the safety steps and disassembly and assembly sequence and record points.

02

Run work orders independently and diagnose common models

Typical scope:Independently complete on-site diagnosis and replacement and retesting and customer communication for common models.

Readiness evidence:Can present first-time fix rate and repeat visit rate and customer feedback records.

Credential boundary:Must have isolation and voltage testing and instrument use and fault localization ability.

Next moves:Write the common model faults and criteria into a reusable quick reference.

03

Handle difficult cases and self-service equipment and mentor others

Typical scope:Handle difficult and high-volume and self-service equipment on-site problems and mentor newcomers.

Readiness evidence:Can present difficult case and mentoring and safety inspection records.

Credential boundary:Editor's suggestion: verify the target model, difficult case handling and self-service equipment experience requirements.

Next moves:Organize difficult localization methods into a reusable process.

04

Participate in building service standards and safety systems

Typical scope:Participate in building service standards and safe work and data handling and spare parts systems.

Readiness evidence:Can present policy documents and inspection and training records.

Credential boundary:Editor's suggestion: verify the institutional duties and experience requirements assigned by the employer.

Next moves:Distill policy key points into handover-ready text.

Component-level repair and testing direction

01

Do parts identification and testing support under guidance

Typical scope:Complete parts identification and measurement and cleaning and replacement support under guidance.

Readiness evidence:Can present measurement and parts identification and testing records.

Credential boundary:Editor's suggestion: prepare electronics foundations, instrument reading and parts identification records.

Next moves:Make a checklist of the measurement and identification points.

02

Independently complete component-level repair and calibration

Typical scope:Independently complete component-level repair and soldering and assembly and calibration and retesting.

Readiness evidence:Can present soldering and assembly and calibration and retesting records.

Credential boundary:Must have soldering and assembly and calibration ability and drawing reading ability.

Next moves:Write the component-level repair process into fixed steps.

03

Lead volume and specialized repair

Typical scope:Lead volume repair or specialized refurbishment and spare part substitution verification and mentor newcomers.

Readiness evidence:Can present volume repair results and spare part substitution verification and mentoring records.

Credential boundary:Editor's suggestion: verify the experience required for volume repair and spare parts management.

Next moves:Organize volume and specialized experience into a reusable plan.

04

Participate in building process and quality standards

Typical scope:Participate in building repair process and quality standards and spare part substitution and acceptance systems.

Readiness evidence:Can present process documents and quality inspection and training records.

Credential boundary:Editor's suggestion: verify the experience and position authority for process and quality responsibility.

Next moves:Organize the process and standards into handover-ready policy text.

Installation and configuration and customer support direction

01

Do installation and configuration support under guidance

Typical scope:Complete unboxing and installation and basic configuration of new equipment and customer demonstration support under guidance.

Readiness evidence:Can present installation and configuration and demonstration records.

Credential boundary:Editor's suggestion: prepare equipment and system foundations and customer explanation records.

Next moves:Make a checklist of the installation and configuration steps.

02

Independently complete installation and configuration and customer training

Typical scope:Independently complete new equipment installation and software and peripheral configuration and explain use and maintenance to the customer.

Readiness evidence:Can present installation and configuration records and customer confirmation and training records.

Credential boundary:Must have operating system and peripheral device and data handling and communication ability.

Next moves:Write the installation and training points into a stable version.

03

Lead branch deployment and volume delivery

Typical scope:Lead branch deployment or volume delivery and coordinate customers and manufacturers and third parties.

Readiness evidence:Can present deployment plans and delivery and customer acceptance and issue tracking records.

Credential boundary:Editor's suggestion: verify the task requirements for volume delivery and multi-party coordination.

Next moves:Organize volume delivery experience into a reusable plan.

04

Participate in building customer service and data handling systems

Typical scope:Participate in building customer service standards and data handling and warranty and asset and safety systems.

Readiness evidence:Can present policy documents and inspection and training records.

Credential boundary:Editor's suggestion: verify the duties and authorization of customer service and data policy positions.

Next moves:Organize policy key points into handover-ready text.

Capability ladder: what demonstrates readiness?

  1. 01

    Able to complete disassembly and assembly and replacement support and records under guidance

    Able to complete work order intake and disassembly and assembly and cleaning and parts replacement support and record completion under the guidance of a technician or supervisor, follow standards on isolation and voltage testing and tool use and work order record requirements, and report and correct promptly when an anomaly or missing part or data risk is found.

  2. 02

    Able to independently complete diagnosis and replacement and retesting for common models

    Able to independently complete on-site diagnosis and parts replacement and retesting and calibration for common models, and write the symptoms and test data and replacement records and customer confirmation clearly.

  3. 03

    Able to handle difficult and high-volume problems and mentor newcomers

    Able to handle difficult and high-volume and self-service equipment on-site problems and mentor newcomers, checking safety procedures and retesting quality and data handling and work order authenticity.

  4. 04

    Able to participate in building service standards and spare parts and safety systems

    Able to participate in building service standards and spare parts and warranty and data handling and safe work systems, with the corresponding position authorization.

Career outlook and moving to related occupations

What is the outlook for this line of work? Which related occupations can I move into?

The BLS Table 1.2 overall employment projection for 49-2011 in 2025—2035 is 72,100 to 69,900, a published net change of about -2,100, or -3.0%, with about 6,100 average annual openings; each column is rounded separately, and subtracting the displayed endpoints cannot replace the net change. This is an overall employment projection, not an AI attribution, and does not infer individual opportunity. The current O*NET industry structure is wholesale 29%, retail 28%, other services 17%, other 26%; the detail page agrees on the top three industries for 2025. The precise Chinese occupational wage gap is retained, and the related industry average for repair enterprises serves only as background.

Three sources, three different measures

BLS Table 1.2 employment projections (49-2011)

2025—2035 (BLS Employment Projections Table 1.2 scope)

United States · Exact occupational scope for 49-2011.00 (BLS 2025—2035)

A decline of 3.0% (2025—2035); about 6,100 average annual job openings

Employment change rate (2025—2035)

This figure is the ten-year net employment change (a decline of 3.0%), while annual openings also include separations and retirement replacements; the two cannot be written as the same indicator; the projection contains assumptions and error, is not equal to annual actuals, and cannot be used to derive individual hiring probability.

Does not establish:It is a U.S. national statistical scope and does not distinguish industry and employer type and region; it also cannot be used to infer the number of positions at a particular service branch or employer.

ILO:Generative AI and Jobs: A Refined Global Index of Occupational Exposure

Study publication point (2025 public version)

Global (cross-economy) · Cross-economy, occupation level (not a single country's official statistics)

Exposure ranking and measurement method

Generative AI occupational exposure index

The study provides an occupation-level generative AI exposure index, used to compare the degree of task exposure across occupations; it does not provide forecasts of job gains or losses.

Does not establish:It is an exposure measure rather than an adoption rate or automation rate; the cross-economy scope differs from national statistical scopes and cannot be directly converted into job changes for the United States or China.

National Bureau of Statistics "Average annual wages of urban unit employees" search entry

2025 wage reference period; NBS release 15 May 2026

Mainland China · Mainland China (no one-to-one equivalent occupational sub-class established)

Insufficient evidence: no national Chinese mainland median, percentiles or starting pay fully corresponding to Computer, Automated Teller, and Office Machine Repairers was obtained. A matching industry annual average does not remove this gap.

Precise occupational wage gap; the repair enterprise industry reference is listed separately

Insufficient evidence: no national Chinese mainland median, percentiles or starting pay fully corresponding to Computer, Automated Teller, and Office Machine Repairers was obtained. The matching repair enterprise industry average is listed separately and still cannot serve as the occupational median or starting pay.

Does not establish:This is the employee average for the entire industry category, not this occupation's median, an individual's take-home pay or a novice wage; the two unit types are listed separately and cannot be spliced into an occupational wage range. The statistics exclude sole proprietors and the self-employed. The employer's main activity and the actual position must be verified separately; an industry reference is not equivalent to an occupational mapping.

Where can your current capabilities transfer?

These are capability relationships, not automatic promotions or credential waivers.

Office machine operators (except computer)

Editorial judgment: moderate

Transfers:Shared competencies: equipment operation, working to procedure, quality and output records.

Build next:Moving to an equipment operator position: requires the target equipment operation, output and quality inspection experience; fault diagnosis and repair experience cannot substitute for the operator position's specific processes.

View career profile

Coin vending and machine servicers and repairers

Editorial judgment: moderate

Transfers:Shared competencies: mechanical and electrical foundations, on-site work, fault handling and customer communication.

Build next:Lacks collection and on-site work experience with coin-operated and amusement equipment.

View career profile

Equipment installers (audio-visual equipment installation and repair)

Editorial judgment: moderate

Transfers:Shared competencies: electrical and electronic foundations, hands-on wiring ability, on-site communication and records.

Build next:Requires target audio-visual equipment, wiring and system commissioning knowledge, and verification of the actual division of installation and repair tasks in that position; this page obtained no comparison of the diagnostic share.

View career profile

Electrical and electronic equipment installers and repairers

Editorial judgment: large

Transfers:Shared competencies: electrical safety awareness, tool use, on-site work and records.

Build next:Requires verifying the target industrial or commercial electronic equipment, voltage level, technical materials and safety training; where regulated work is involved, verify the applicable permit, and a broad occupational scope cannot be equated wholesale with high-voltage construction.

View career profile

Computer support specialists

Editorial judgment: small

Transfers:Shared competencies: computing and electronics knowledge, fault localization approach, customer communication and work order records.

Build next:Lacks scale experience with operating system and account and desktop support and remote support.

View career profile

Computer network support specialists

Editorial judgment: moderate

Transfers:Shared competencies: network and endpoint foundations, fault localization, change and record awareness.

Build next:Lacks network device and server configuration and permission and troubleshooting experience.

View career profile

Computer programmers

Editorial judgment: large

Transfers:Shared competencies: computer hardware and system understanding, testing and troubleshooting, records and handover.

Build next:Moving to computer programmer requires programming languages, program design, code debugging, version management and software delivery; validate with runnable programs and test descriptions, and hardware troubleshooting experience cannot substitute for coding ability.

View career profile

Computer hardware engineers

Editorial judgment: large

Transfers:Shared competencies: hardware and circuit foundations, testing and measurement, fault analysis.

Build next:Moving to hardware engineer requires circuit and digital system design, design verification, engineering testing and the target employer's education requirements; verify ability with design and verification materials, and do not treat repair experience as a design qualification.

View career profile

FAQ and sources

What do computer, automated teller and office machine repairers do every day?

Daily work is mainly on-site diagnosis and fault localization, parts replacement and retesting, and installation and configuration and customers and records: travel to customers' stores or offices to repair equipment or provide emergency repair service; talk with customers to establish the fault details and disassemble and test to localize the defect; use hand or power tools to repair, adjust or replace electrical or mechanical parts and reassemble; operate machines to test function and align, adjust and calibrate to specifications; install and configure new equipment and operating system software and peripherals; reinstall or adjust software settings; maintain parts inventory and order spare parts; explain operation and maintenance to customers; and maintain repair records and complete bills and time cards and expense reports. The page's work context shows 94% have telephone conversations every day, 76% have face-to-face discussions every day, 71% use their hands to handle objects and tools continuously or almost continuously, and 40% stand continuously or almost continuously.

Where is the boundary between this occupation and adjacent occupations?

Office machine operators (except computer) run equipment and may clean or make minor repairs as assigned; check the role before escalating a larger repair; coin vending and machine servicers serve coin-operated and amusement equipment, with a different object and authorization; equipment installers (audio-visual equipment installation and repair) mainly install and wire audio-visual equipment; electrical and electronic equipment installers and repairers may install, test or repair industrial, transport or other electrical and electronic equipment, with authorization depending on the actual equipment, task and jurisdiction; computer support specialists mainly support software and accounts and desktops and may handle minor hardware repairs and refer major faults to a repair team; computer network support specialists mainly configure and troubleshoot networks and servers. This occupation centers on restoring computers, ATMs and office electronic equipment to a usable state and delivering the work order. Shared competencies do not mean interchangeability: the object and the authorization differ.

Will AI replace this occupation?

Tools may help organize records and suggest checks. Authorized people decide design release or service action; employment projections do not measure replacement of tasks.

Which tasks are most easily assisted?

From the task structure, the steps affected earlier are the structured and digitizable ones: fault code and error log classification, technical material and historical work order retrieval, generation of test steps and records and work order and expense drafts, and spare parts matching and inventory summaries. Affected later are the steps requiring hands-on work and responsibility: on-site symptom judgment and disassembly sequence, execution of live-work risk and safety procedures, assembly and calibration and retesting criteria, and customer data access and warranty and authorization judgments. It must be emphasized: this judgment is an editorial compilation, not an exposure measure or job forecast provided by the sources.

Which abilities are hard for AI to replace?

Working out an executable test sequence by symptom and verifying it on the actual machine, working safely within the live and isolated boundaries, judging whether assembly and calibration and retesting truly meet the standard, and limiting data on customer equipment to the necessary scope and writing the work order clearly. These abilities depend on hands-on experience and safety authorization and professional habits; replacing any of these steps with tool output makes "whether the equipment is truly repaired and who is accountable for customer data and billing" unanswerable.

What is the income for this occupation roughly?

The U.S. 49-2011 national median was 47,810 USD per year in May 2025. See the U.S. wage section for employment projections. Mainland China has no verified national wage for this exact occupation here.

What education is needed for this line of work?

BLS Table 1.2 lists some college with no degree, no related experience and short-term on-the-job training as typical for U.S. 49-2011. O*NET Job Zone 1–2 is a broad preparation group. Check the actual equipment, employer and authorizations.

What licenses or certifications are needed?

O*NET displays 8 candidate certifications from the CareerOneStop directory. The listing does not establish authorization, a universal requirement or endorsement. Check manufacturer training and specific device, site and data access authority separately.

Is it realistic to switch careers into this line of work?

Baskyin’s undated recruitment page has a printer repair engineer entry covering printer and copier support, upkeep and repair. Its requirements apply to that employer’s equipment role; current vacancy status and ATM requirements are not established.

Is this occupation worth investing in?

Use MR-11 and W-MR to identify the reported symptom and missing evidence. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question. Use the paper exercise to decide whether you would repeat this record check.

Why is there no nationwide wage figure for this exact occupation in mainland China?

This page could not verify nationwide mainland China wage figures for this exact occupation, including median, percentiles or starting pay. The separately listed National Bureau of Statistics industry averages describe the industry, not this occupation.

What is the scope of the U.S. data?

U.S. BLS wages are for 49-2011, May 2025. The 2025–2035 projection counts jobs and openings, which are distinct from wages or current vacancies.

What is the nature of the exercise on the page?

Use MR-11 and W-MR to identify the reported symptom and missing evidence. Name the next responsible role where the record identifies it. If it does not, mark the owner pending and write a verification question. Use the fictional records only; the exercise grants no access to real devices, money or customer data.

Sources

The occupational identity, tasks and work context on this page use O*NET-SOC49-2011.00; U.S. wages are BLS May 2025 national employee data and employment is the BLS2025—2035 overall projection, not an AI attribution. Precise occupational pay for mainland China was not obtained, and the related industry average for category 812 repair enterprises serves only as broad-scope background; the editorial path, risk scenarios and fictitious exercises are kept separate from facts.

The nine-section content verification for this round was carried out on October 8, 2026; content outside the original scope is retained, and the source register records the actual consultation dates separately.

The main sources are the public pages of U.S. O*NET OnLine (including the occupational detail and summary and industry distribution and technology and national wage tables and certification information), the public wage and projection scope of the U.S. Bureau of Labor Statistics, OSHA's general practice for controlling electrical hazards, the ILO research on generative AI occupational exposure, and the Personal Information Protection Law of the People's Republic of China and occupational classification and wage statistics entries; all figures and query results must retain their occupation and region and period and units and statistical scope; see the "Sources" section of the page for the source list.

  • O*NET-SOC 49-2011.00 detailed occupational information (tasks and work activities)O*NET OnLine|United States|Page updated 2026; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 detailed occupational information (tasks and work activities)
    • Official detailed occupational information
    • The 25 tasks, work activities and work context

    Limitations:Supports the precise occupational identity, the 25 tasks, work activities and work context; does not include what any specific jurisdiction or employer requires for live work and data confidentiality and warranty.

  • O*NET-SOC 49-2011.00 occupational summary (knowledge, abilities, interest code and work styles)O*NET OnLine|United States|O*NET profile reviewed 2026-11-09|official source
    View original source:O*NET-SOC 49-2011.00 occupational summary (knowledge, abilities, interest code and work styles)
    • Occupational profile.
    • BLS wages and projections use their stated periods.

    Limitations:Occupational profile; see BLS Table 1.2 for 2025–2035 data.

  • O*NET-SOC 49-2011.00 industry distributionO*NET OnLine|United States|Current page; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 industry distribution
    • Official industry distribution
    • Industry structure shares (not the number of positions or wages)

    Limitations:The separate O*NET industry table lists wholesale 29%, retail 28%, other services 17%, and other industries 26%. The occupational detail also reports the same top three shares in its 2025 summary. These are industry employment shares.

  • O*NET technology list (49-2011.00 employer hiring technology keywords and mention shares)O*NET OnLine|United States|U.S. national job posting statistics for all of 2025 (Lightcast); retrieved 2026-09|official source
    View original source:O*NET technology list (49-2011.00 employer hiring technology keywords and mention shares)
    • Official technology list
    • Skill mentions in U.S. job postings for all of 2025; currently 17 items

    Limitations:The current page lists 17 software skills, some with integer shares, some below 1% and some with no share provided; the data are U.S. Lightcast job postings for all of 2025. They support only mention in hiring text and cannot support proficiency, AI adoption or repair effects; the old decimal precision was not confirmed against the original text this round.

  • O*NET-SOC 49-2011.00 preparation level and apprenticeship examplesO*NET OnLine|United States|Current page; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 preparation level and apprenticeship examples
    • Official preparation level and apprenticeship examples
    • Job Zone 1-2 generic description; not this occupation's education distribution

    Limitations:Supports the generic preparation level description for Job Zone 1-2, an SVP below 6.0 and 4 apprenticeship title examples. The high school/GED and experience durations are Job Zone group descriptions, not this occupation's education distribution or a specific employer's recruitment condition.

  • O*NET-SOC 49-2011.00 national certification information entryO*NET OnLine|United States|Current page; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 national certification information entry
    • O*NET displays 8 candidate certifications using CareerOneStop directory data. The individual organizations issue their own certifications.
    • Check manufacturer permission and work authorization separately.

    Limitations:O*NET displays 8 candidate certifications using CareerOneStop directory data. The individual organizations issue their own certifications. Check manufacturer and work authorization separately.

  • BLS May 2025 wage data (occupational code corresponding to 49-2011.00, national occupational employee scope)O*NET OnLine / U.S. Bureau of Labor Statistics|United States|BLS May 2025 wage data; retrieved 2026-09|official source
    View original source:BLS May 2025 wage data (occupational code corresponding to 49-2011.00, national occupational employee scope)
    • National wage data (BLS May 2025)
    • National median and 10/25/50/75/90 percentiles

    Limitations:Supports May 2025 national occupational employee wage percentiles. This page uses the United States row; select a state or enter a ZIP code for local estimates. The series excludes self-employed workers and owner income.

  • BLS employment projections for 49-2011U.S. Bureau of Labor Statistics|United States|2025–2035 Employment Projections|official source
    View original source:BLS employment projections for 49-2011
    • U.S. detailed occupation job projections.
    • Openings and net job change are separate measures.

    Limitations:National employment measures do not establish local job listings or an individual hiring chance.

  • National Bureau of Statistics: 2025 annual average wages of urban unit employeesNational Bureau of Statistics (People's Republic of China)|Mainland China|2025 data; published 2026-05-15|Official source (industry and broad personnel category scope, does not include this occupation)
    View original source:National Bureau of Statistics: 2025 annual average wages of urban unit employees
    • Official statistics entry (industry and broad personnel category scope)
    • Table 2 non-private 70,226 yuan / Table 5 private 52,059 yuan; industry reference only

    Limitations:National Bureau of Statistics 2025 national urban unit annual average wages for "resident services, repair and other services": non-private units 70,226 yuan and private units 52,059 yuan, both pre-tax annual averages. This is the employee average for the entire industry category, not this occupation's median, an individual's take-home pay or a novice wage; the two unit types are listed separately and cannot be spliced into an occupational wage range. The statistics exclude sole proprietors and the self-employed. Tables 2/5 cover all employees of the industry category and do not list this occupation separately; the matching basis for category 812 repair enterprises cites the industry classification separately.

  • Ministry of Human Resources and Social Security labor relations and wage information entryMinistry of Human Resources and Social Security|Mainland China|Information published 2025; retrieved 2026-09|official source
    View original source:Ministry of Human Resources and Social Security labor relations and wage information entry
    • Official information entry
    • Mainland China labor relations and wage information

    Limitations:It is the mainland China labor relations and wage information entry registered in this evidence route; this round did not establish a national occupational wage distribution corresponding one-to-one with this occupation on that basis, and this page publishes no figure from it.

  • Published information on the Occupational Classification Code of the People's Republic of China (2022 edition)Ministry of Human Resources and Social Security|Mainland China|2022 edition published information; retrieved 2026-09|official source
    View original source:Published information on the Occupational Classification Code of the People's Republic of China (2022 edition)
    • Official published information
    • General framework for occupational classification

    Limitations:Supports the general framework of mainland China occupational classification; this page does not use it to determine this occupation's Chinese equivalent sub-class or wage scope.

  • ILO working paper "Generative AI and Jobs: A Refined Global Index of Occupational Exposure"International Labour Organization|Global|2025 public version|research
    View original source:ILO working paper "Generative AI and Jobs: A Refined Global Index of Occupational Exposure"
    • Research paper
    • Generative AI occupational exposure index

    Limitations:It is an exposure measure, not an adoption rate, automation rate or forecast of job losses; cross-economy scopes cannot be directly converted into national job changes.

  • Editorially designed by FermatMind and fictitious exerciseFermatMind career content editorial team|Editorial design for this page|2026-09|editorial synthesis and fictional exercise
    • Editorial material
    • Editorial compilation and fictitious exercise

    Limitations:Editorial compilations and fictitious materials, not research findings or industry facts; must not be used for real equipment repair or as a basis for safety and compliance and billing decisions.

  • Artificial Intelligence Risk Management Framework 1.0(NIST AI 100-1)NIST|United States|Version 1.0; retrieved 2026-09|official source
    View original source:Artificial Intelligence Risk Management Framework 1.0(NIST AI 100-1)
    • Governance framework
    • AI risk governance and management processes

    Limitations:It is a framework for AI risk governance and management processes (covering reliability, safety, privacy and liability risk) and contains no occupation-level adoption data; citing it does not constitute a quantified conclusion about this occupation's risk.

  • O*NET national wage page (49-2011.00, BLS May 2025 wage data)O*NET OnLine / U.S. Bureau of Labor Statistics|United States|BLS May 2025 wage data; retrieved 2026-09|official source
    View original source:O*NET national wage page (49-2011.00, BLS May 2025 wage data)
    • National wage data (BLS May 2025)
    • National median and percentiles

    Limitations:Supports the national median wage and percentiles; use must retain the market and period and units and occupational scope, and regional data must not be treated as an individual offer.

  • O*NET-SOC 49-2011.00 work context (Work Context fields)O*NET OnLine|United States|Current page; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 work context (Work Context fields)
    • Official work context fields
    • Work context percentage distributions

    Limitations:Supports the percentage distributions of work context (environment and protection, communication and collaboration, autonomy and decisions, precision and responsibility, posture and activity); they are respondent distributions, not a guarantee for an individual position.

  • BLS Occupational Employment and Wage Statistics methodology (Handbook of Methods)U.S. Bureau of Labor Statistics|United States|Methodology note (not a data period)|official source
    View original source:BLS Occupational Employment and Wage Statistics methodology (Handbook of Methods)
    • Official methodology note
    • Wage statistics coverage and conversion definitions

    Limitations:Supports the coverage scope of wage statistics, the items included and excluded, and the standard work-year conversion definitions; not to be used to infer personal income.

  • BLS Occupational Projections and Characteristics (2025—2035 scope)U.S. Bureau of Labor Statistics|United States|2025—2035 projection period|official source
    View original source:BLS Occupational Projections and Characteristics (2025—2035 scope)
    • Official employment projection (2025—2035)
    • About 72,100 in 2025, a 3.0% decline, and about 6,100 average annual openings

    Limitations:The SOC49-2011 row of Table 1.2: 2025 employment 72.1 thousand, 2035 employment 69.9 thousand, official net change -2.1 thousand, -3.0%, average annual openings 6.1 thousand. The separately rounded displayed endpoints cannot be subtracted to replace the published net change; this is an overall employment projection, not an AI attribution, and cannot be used to derive individual hiring probability.

  • O*NET-SOC 49-2011.00 work context (Work Context fields)O*NET OnLine|United States|Current page; retrieved 2026-09|official source
    View original source:O*NET-SOC 49-2011.00 work context (Work Context fields)
    • Official work context fields
    • Work context percentage distributions

    Limitations:Supports the percentage distributions of work context (environment and protection, communication and collaboration, autonomy and decisions, precision and responsibility, posture and activity); they are respondent distributions, not a guarantee for an individual position.

  • OSHA Controlling Electrical Hazards (general practice for controlling electrical hazards)Occupational Safety and Health Administration (United States)|United States|Public publication; retrieved 2026-09|official source
    View original source:OSHA Controlling Electrical Hazards (general practice for controlling electrical hazards)
    • Official safety publication
    • General practice for controlling electrical hazards

    Limitations:Supports the general practice statement that "before servicing or inspecting electrical equipment, de-energize it and prevent unexpected re-energization, and use suitable personal protective and insulated tools"; it does not replace the text of the applicable regulations or employer and manufacturer policy.

  • Personal Information Protection Law of the People's Republic of ChinaStanding Committee of the National People's Congress; republished by the Ministry of Industry and Information Technology|Mainland China|Published 2021; retrieved 2026-09|official source
    View original source:Personal Information Protection Law of the People's Republic of China
    • Legal text
    • General requirements for personal information processing

    Limitations:Supports the boundary statement that "when servicing and coming into contact with personal information on equipment, lawful, legitimate, necessary and security protection requirements must be followed, and data must not be viewed, copied or transmitted arbitrarily simply because physical access to the equipment was obtained"; it does not replace specific compliance judgments or legal advice.

  • Industrial classification of the national economy GB/T4754-2017 (812 computer and office equipment repair)National Bureau of Statistics|Mainland China|GB/T4754-2017|official source
    View original source:Industrial classification of the national economy GB/T4754-2017 (812 computer and office equipment repair)
    • Official industry classification standard
    • PDF page 84 (printed page 78) 812/8121/8129

    Limitations:Supports classifying enterprises specializing in computer and office equipment repair under resident services, repair and other services; it is not an occupational equivalence mapping and does not cover wages of internal repair positions at banks, sales enterprises or other employers.

  • Three representative core tasks of this occupationFermatMind / 费马测试|2026-10-18|Editorial model estimation method
    View original source:Three representative core tasks of this occupation
    • Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+0+50)/3+0.5)=33; fermatmind-ai-impact-v1; 2026-10-18.
    • Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
    • On-site diagnosis and fault localization|Travel to customer sites and test by symptom to localize the fault|Travel to customers' stores or offices to repair equipment or provide emergency repair service; talk with customers to establish the details of the equipment problem; disassemble machines to inspect wires and gears and bearings and similar parts for wear or defects; use oscilloscopes and signal generators and ammeters and voltmeters or specialized diagnostic software to test parts or circuits to locate defects; and read blueprints and charts and schematics to determine equipment settings or adjustment parameters (corresponds to the first, fifth, sixth, sixteenth and nineteenth O*NET tasks). — 50/100; weight=1/3; computer-automated-teller-and-office-machine-repairers.profile.responsibilities-block.1[0]
    • Repair and replacement and adjustment|Repair or replace electrical and mechanical parts and adjust and calibrate to specifications|Use hand tools and power tools or soldering equipment to repair, adjust or replace electrical or mechanical parts; reassemble machines after making repairs or replacing parts; align, adjust or calibrate equipment to specifications; and clean, oil or adjust mechanical parts to maintain operating efficiency and prevent failures (corresponds to the eighth, second, twentieth and seventeenth O*NET tasks). — 0/100; weight=1/3; computer-automated-teller-and-office-machine-repairers.profile.responsibilities-block.1[1]
    • Installation and configuration and updates|Install and configure new equipment and operating system software and peripherals|Install and configure new equipment, including operating system software or peripherals; reinstall software programs or adjust existing software settings to fix equipment faults; and update existing equipment, such as installing updated circuit boards or adding memory (corresponds to the eleventh, thirteenth and fourteenth O*NET tasks). — 50/100; weight=1/3; computer-automated-teller-and-office-machine-repairers.profile.responsibilities-block.1[3]

    Limitations:Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.

  • Baskyin’s undated recruitment page has a printer repair engineer entry covering printer and copier support, upkeep and repair. Its requirements apply to that employer’s equipment role; current vacancy status and ATM requirements are not established.Hunan Chengheda Information Technology Co., Ltd. (Baskyin website)|CN|Undated|Employer original listing
    View original source:Baskyin’s undated recruitment page has a printer repair engineer entry covering printer and copier support, upkeep and repair. Its requirements apply to that employer’s equipment role; current vacancy status and ATM requirements are not established.
    • Baskyin’s undated recruitment page has a printer repair engineer entry covering printer and copier support, upkeep and repair. Its requirements apply to that employer’s equipment role; current vacancy status and ATM requirements are not established.

    Limitations:Baskyin’s undated recruitment page has a printer repair engineer entry covering printer and copier support, upkeep and repair. Its requirements apply to that employer’s equipment role; current vacancy status and ATM requirements are not established.

  • BLS counts jobs in the National Employment Matrix; annual openings include replacement and are not current postings.U.S. Bureau of Labor Statistics|US|Methodology|Original source
    View original source:BLS counts jobs in the National Employment Matrix; annual openings include replacement and are not current postings.
    • BLS counts jobs in the National Employment Matrix; annual openings include replacement and are not current postings.

    Limitations:BLS counts jobs in the National Employment Matrix; annual openings include replacement and are not current postings.

  • O*NET displays 8 candidate certifications from the CareerOneStop directory. The listing does not establish authorization, a universal requirement or endorsement.O*NET OnLine|US|Read November 10, 2026|Original source
    View original source:O*NET displays 8 candidate certifications from the CareerOneStop directory. The listing does not establish authorization, a universal requirement or endorsement.
    • O*NET displays 8 candidate certifications from the CareerOneStop directory. The listing does not establish authorization, a universal requirement or endorsement.

    Limitations:O*NET displays 8 candidate certifications from the CareerOneStop directory. The listing does not establish authorization, a universal requirement or endorsement.

  • China Employment Training Technical Instruction Center occupational profile 4-12-02-02 covers office equipment such as printers, copiers and projectors. It does not establish ATM scope, hiring requirements or actual service authorization.China Employment Training Technical Instruction Center|CN|2022-04-15|Original source
    View original source:China Employment Training Technical Instruction Center occupational profile 4-12-02-02 covers office equipment such as printers, copiers and projectors. It does not establish ATM scope, hiring requirements or actual service authorization.
    • China Employment Training Technical Instruction Center occupational profile 4-12-02-02 covers office equipment such as printers, copiers and projectors. It does not establish ATM scope, hiring requirements or actual service authorization.

    Limitations:China Employment Training Technical Instruction Center occupational profile 4-12-02-02 covers office equipment such as printers, copiers and projectors. It does not establish ATM scope, hiring requirements or actual service authorization.

  • O*NET® 31.0 Core Task StatementsU.S. Department of Labor, Employment and Training Administration|United States|O*NET 31.0|Primary document
    View original source:O*NET® 31.0 Core Task Statements

    Limitations:Verbatim Core Task Statements excerpted from the O*NET® 31.0 Database, used under CC BY 4.0. U.S. occupational scope.

  • O*NET® database license · CC BY 4.0U.S. Department of Labor, Employment and Training Administration|United States|O*NET 31.0|Primary document
    View original source:O*NET® database license · CC BY 4.0

    Limitations:Verbatim Core Task Statements excerpted from the O*NET® 31.0 Database, used under CC BY 4.0. U.S. occupational scope.

Usage note: this page is an occupational information service and does not constitute electrical safety, data compliance, legal, audit, tax or investment advice; decisions on live work and isolation and prevention of unexpected re-energization, access to and confidentiality and handling of personal information on customer equipment, and warranty and asset and manufacturer authorization and billing must be governed by the applicable regulations and employer and manufacturer policy and the opinions of personnel with the corresponding qualifications.

Computer, Automated Teller, and Office Machine Repairers | FermatMind