Geothermal Technician
SOC 49-9099 · O*NET 49-9099.01
Geothermal technicians monitor and maintain equipment, log readings and help find faults. Some work in geothermal power plants; others install or service heat pumps. U.S. wages and projections here cover a broader installation and repair occupation.
Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+25+0)/3+0.5)=25; fermatmind-ai-impact-v1; 2026-10-18.
Quick judgment
What kind of person is suited to being a geothermal technician?
A single H1 exercise only observes unit conversion, evidence layering, and handover habits; it cannot prove field installation and repair capability, obtaining qualifications, long-term fit, or personal employment outcomes. If you remain interested, then check the target position's real training, hours, and activity requirements.
Caution signals | O*NET also shows (49-9099.01, percentage response measure): exposure to hazardous conditions 90% every day; exposure to contaminants 74% every day; wearing routine protective or safety equipment 84% every day; outdoor exposure to all weather 83% every day; working in an enclosed vehicle or operating enclosed equipment 78% every day; responsibility for the health and safety of others 63% very high responsibility; and work hours 71% more than 40 hours per week. This occupation deals with in-service geothermal plant equipment and instrumentation and control and electrical systems, ground source heat pumps and loop piping, and drilling, excavation, welding, and pressure testing work, and a single unconfirmed work permit or energy isolation, unhandled pressure or flow or electrical parameter excursion, unrecorded failed weld or pressure test, or ground disturbance, confined space, or height work not carried out according to permit can cause personal, equipment, and environmental accidents, and may also involve electric power work safety, special equipment and pressure piping, environmental protection, and occupational health management rules. O*NET lists this occupation in Job Zone 1-2 (little to some preparation), and the entry education requirement is relatively low but the field safety and certificate requirements are not low. If you find it hard to work hands-on outdoors and under hazardous conditions and noise and contaminants over the long term, find it hard to accept serious consequences of error and personal safety responsibility, or are unwilling to take responsibility for the traceability of testing and maintenance and permit records, you should treat these as real costs that need careful weighing.
What kind of person is more likely suited to being a geothermal technician?
Fit signals | The work activity importance for U.S. O*NET 49-9099.01 shows: obtaining information (86), making decisions and solving problems (86), communicating with superiors, peers, or subordinates (83), controlling machines and processes (82), operating vehicles, mechanized devices, or equipment (81), handling and moving objects (79), identifying objects, actions, and events (76), organizing, planning, and prioritizing work (76), performing general physical activities (74), and repairing and maintaining mechanical equipment (74) are the most important activities for this occupation; the work context shows face-to-face or personal and team discussions 96% every day, wearing routine protective or safety equipment 84% every day, exposure to hazardous conditions 90% every day, telephone communication 82% every day, working in an enclosed vehicle or operating enclosed equipment 78% every day, outdoor exposure to all weather 83% every day, and exposure to contaminants 74% every day; work hours 71% more than 40 hours per week; and responsibility for the health and safety of others 63% very high responsibility. If you are willing to work hands-on between plant equipment and building sites, can operate and test according to procedures and judge anomalies from parameters and instruments, and are glad to work outdoors and under hazardous conditions according to safety requirements, the daily demands of this occupation are closer to how you work.
In what situations should choosing to be a geothermal technician be considered carefully?
This list is for self-questioning only and does not constitute hiring criteria, an ability rating, or an evaluation of position competence, nor does it constitute any electric power, mechanical, electrical, geothermal resource, piping, work safety, or investment advice. This page corresponds to the exact occupation U.S. O*NET/SOC 49-9099.01 'Geothermal Technicians': perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources, monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary, and install, test, and maintain residential and commercial geothermal heat pumps. Official scope text: Perform technical activities at power plants or individual installations necessary for the generation of power from geothermal energy sources. Monitor and control operating activities at geothermal power generation facilities and perform maintenance and repairs as necessary. Install, test, and maintain residential and commercial geothermal heat pumps. Common job titles include Geothermal Service Technician, I and C Technician (instrumentation and control technician), I and E Technician (instrumentation and electrical technician), Operations and Maintenance Technician, Operations Technician, Operator Technician, Plant Electrical Technician, Plant Mechanic, and Plant Technician. The core tasks listed by O*NET include: monitor and adjust the operation of geothermal plant equipment or systems (importance 83); write and maintain work logs, reports, or other documents (83); identify and correct faults in geothermal plant equipment and electrical systems and instrumentation or controls (81); collect and record operating data from the geothermal plant or well field (81); determine whether emergency or auxiliary systems are needed under extreme weather conditions to maintain building heating or cooling (72); perform pre- and post-installation pressure, flow, and related tests on vertical and horizontal geothermal loop piping (69); and identify equipment options such as compressors and make appropriate selections (66). Supplemental tasks include: adjust generation systems to meet load and distribution demand (88); maintain electrical switchgear and process control and transmitters and instrumentation and control equipment according to plant procedures (79); calculate residential heat loss and heat gain coefficients to determine the heating and cooling capacity needed for a ground source heat pump (79); maintain and verify or repair plant instrumentation and control and electronic devices (79); install and maintain plant electrical protection equipment (73); design and lay out geothermal heating systems according to building characteristics and heating and cooling demand and piping and equipment requirements and applicable regulations (73); install and maintain geothermal system instrumentation or controls (72); carry out flushing and venting and other commissioning preparations for newly installed geothermal heating systems (67); weld high-density polyethylene (HDPE) and similar piping (butt fusion, socket fusion, sidewall fusion, and electrofusion) (66); test water source flow and contaminants and other indicators (66); install and maintain or repair ground source or water source coupled heat pumps (66); integrate water heater systems with geothermal heat exchange systems (65); determine the most suitable geothermal loop system type for a property (59); excavate trenches and lay piping to depth (54); apply coatings or operate anti-corrosion systems on geothermal plant equipment or structures (54); backfill trenches to protect piping (53); and operate excavators, backhoes, rock breakers, trench compactors, pavement cutters, grout mixing and pumping equipment, loop reels, and coiled tubing units (52). The wage, employment, and industry figures on this page use the parent occupation 49-9099.00 (Installation, Maintenance, and Repair Workers, All Other) measure presented by O*NET on that page, and are not the measure for the exact occupation 49-9099.01 itself; the measures and boundaries are described in the sections below.
How can a small exercise help judge whether you are suited to being a geothermal technician?
Editorial exercise H1 | 6 complete fictional inputs and reference solutions are given below; independently use 90 minutes to check water volume and heat, existing pressure drop records, missing permit items, versions, handover deadlines, and the cost subtotal. Read paper records only, and do not operate equipment or perform pressure testing, welding, or energizing. Produce a results table, a problem table, a V1→V2 revision table, and a handover within 200 characters.
Career profile
Geothermal technicians monitor and maintain equipment, log readings and help find faults. Some work in geothermal power plants; others install or service heat pumps. U.S. wages and projections here cover a broader installation and repair occupation.
What is a useful introductory geothermal work sample?
Make a fictional shift log with temperatures, flow, an alarm and a handoff note. Separate what you observed from what you suspect. Do not operate actual equipment without training and site authorization.
Operational monitoring and fault maintenance:
In mainland China requirements are checked against the actual activities: Article 28 of the Work Safety Law on training and Article 30 on the designated special operations qualifications; Article 2 of the Special Equipment Safety Law on the inventory and Article 14 on related personnel qualifications, Articles 39—42 on maintenance, inspection, and anomaly handling, and Articles 50—51 on statutory inspection bodies and personnel qualifications, and ordinary heat pumps or piping cannot be judged from the name alone to be fully included in the inventory. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for those exposed to occupational hazards, and not all technicians undergo one uniform medical examination. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time, with Article 80 on monitoring truthfulness and Articles 150—151 on emissions and permits applying according to the actual scope; not all projects are inferred to need the same permit from the occupational name. Information involving identifiable individuals is checked for lawful basis, necessity, and retention period under Articles 4/6/13/19 of the Personal Information Protection Law, and ordinary equipment parameters and locations are not automatically personal information. Field isolation, ground disturbance, confined space, and protection put in and out of service are checked against the applicable rules and the real plant rules, and a certificate does not replace position or work approval. Lawful corrections of records must keep the original value, the true correction time, the reason, and the review, and backdating or traceless overwriting is prohibited.
- 01Work preparation and permits
- 02installation or patrol and monitoring and parameter recording
- 03testing and verification and anomaly handling
- 04maintenance and repair and replacement
- 05records and handover
- 06review and archiving
Heat pump and loop installation and testing:
In mainland China requirements are checked against the actual activities: Article 28 of the Work Safety Law on training and Article 30 on the designated special operations qualifications; Article 2 of the Special Equipment Safety Law on the inventory and Article 14 on related personnel qualifications, Articles 39—42 on maintenance, inspection, and anomaly handling, and Articles 50—51 on statutory inspection bodies and personnel qualifications, and ordinary heat pumps or piping cannot be judged from the name alone to be fully included in the inventory. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for those exposed to occupational hazards, and not all technicians undergo one uniform medical examination. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time, with Article 80 on monitoring truthfulness and Articles 150—151 on emissions and permits applying according to the actual scope; not all projects are inferred to need the same permit from the occupational name. Information involving identifiable individuals is checked for lawful basis, necessity, and retention period under Articles 4/6/13/19 of the Personal Information Protection Law, and ordinary equipment parameters and locations are not automatically personal information. Field isolation, ground disturbance, confined space, and protection put in and out of service are checked against the applicable rules and the real plant rules, and a certificate does not replace position or work approval. Lawful corrections of records must keep the original value, the true correction time, the reason, and the review, and backdating or traceless overwriting is prohibited.
- 01Work preparation and permits
- 02installation and patrol and parameter recording
- 03testing and verification and anomaly handling
- 04repair and replacement and restoration
- 05records and review
- 06archiving and review
How does geothermal maintenance differ from production management?
Technicians take readings, document faults and maintain equipment under site procedures. Managers coordinate staff, production and maintenance windows. Check whether a vacancy focuses on well fields, plant equipment or building heat pumps.
| Dimension | Main direction | Comparison direction |
|---|---|---|
| Core purpose | Core purpose of this occupation | Taking in-service geothermal plant equipment and instrumentation and control and electrical systems, ground source heat pumps and loop piping, and field work as its object, complete technical work within the boundaries of drawings, procedures, safety, and permits: monitor and adjust operation, identify and correct faults, carry out installation, testing, maintenance, and repair, and collect and record data, so that equipment and system status and testing and maintenance records are traceable and boundaries can be explained. | Core idea of adjacent positions | Most positions in the same group and adjacent positions aim to 'install, operate, or maintain equipment and systems properly within the boundaries of authorization, safety, and permits and keep records', and the differences lie in the object, output, and authorization level: some take geothermal plant equipment and ground source heat pump sites as their object, some take hydraulic or biomass or boiler equipment, some take operating and monitoring according to procedures, and some take high-voltage electrical maintenance or grid dispatch. |
| Main objects and basis | Main objects and basis of this occupation | The objects are geothermal plant equipment and instrumentation and control and electrical and protection devices, ground source heat pumps and buried pipe loops and piping, welding and pressure testing and flushing and commissioning processes, and ground disturbance, confined space, and hazardous work permits; the basis is drawings and process cards and manufacturer requirements and pressure piping and special equipment procedures and electric power work safety and occupational health and environmental protection requirements, along with institutional process and quality rules. | Main objects and basis of adjacent positions | Geothermal production managers rely on operating procedures and permit and interconnection and personnel safety rules; hydroelectric plant technicians and biomass plant technicians rely on their own units or fuel and boiler processes and procedures; gas plant operators and power plant operators rely on operating and monitoring procedures; power distributors and dispatchers rely on grid dispatch procedures; electrical repairers and stationary engineers rely on high-voltage electrical and boiler and pressure vessel inspection procedures. |
| Core process | Core process of this occupation | Work preparation and permits, installation or patrol and monitoring and parameter recording, testing and verification and anomaly handling, maintenance, repair, and replacement, records, handover, and review; every step must be documented according to the safety, process, quality, and permit rules and be reviewable by superiors, operations, and quality. | Core process of adjacent positions | Geothermal production managers focus on operation command and personnel and permit and interconnection management; hydroelectric plant technicians and biomass plant technicians focus on the operation and repair of their own units; gas plant operators and power plant operators focus on operating and monitoring and patrolling according to procedures; power distributors and dispatchers focus on dispatch instructions and distribution actions and records; electrical repairers and stationary engineers focus on the maintenance, testing, and certificate-based work of high-voltage electrical or boiler equipment. |
| Main outputs | Main outputs of this occupation | Usable installation and commissioning records, patrol and monitoring and parameter records, testing and verification and pressure testing and flushing records, troubleshooting and repair and replacement records, instrumentation and control and electrical and protection device maintenance records, and traceable work permit and permit and training records. | Main outputs of adjacent positions | Geothermal production managers produce operation and maintenance and permit and interconnection management results; hydroelectric plant technicians and biomass plant technicians produce operation and maintenance records for their own units; gas plant operators and power plant operators produce operating actions and parameter records; power distributors and dispatchers produce dispatch and distribution action records; electrical repairers and stationary engineers produce maintenance, testing, and inspection records. |
| Responsible party | Responsible party for this occupation | This occupation is responsible for the installation, patrol, monitoring, testing, verification, repair, and recording it performs, and for the work and validation carried out according to drawings, process cards, procedures, safety, and permit requirements; matters involving engineering design, statutory inspection of pressure piping and special equipment, interconnection and permit and acceptance conclusions, and major technical renovation schemes are decided according to the rules by positions or institutions with the corresponding qualifications, and this occupation does not replace their decisions. | Responsible parties for adjacent positions | Responsibility for positions in the same group and adjacent positions is usually defined by the institution, procedures, and authorization, and the objects of responsibility are mostly on-site safety, equipment, the environment, and supply reliability. |
| Authority and approval | Authority and approval of this occupation | Field work, repair, isolation, ground disturbance, confined space, and height work must take place within work permits and permits and the authorized scope; putting instrumentation and protection devices in and out of service and bypassing them require approval according to the procedure; welding, pressure testing, commissioning, and start-up must be carried out according to process cards and procedures and within the authorized scope; matters involving statutory inspection of pressure piping and special equipment, engineering design, interconnection and permit and acceptance conclusions, and environmental protection and occupational health must obtain approval from or be referred to the corresponding position or institution according to the rules, and unauthorized operation or issuing of conclusions is prohibited. | Authority and approval of adjacent positions | The authority of positions in the same group and adjacent positions comes from institutional authorization, practice or qualification and certificate requirements, procedures, and rules, and usually does not include the authority to decide on its own conclusions, signatures, or data provision beyond its own authorization or scope; matters involving engineering, inspection, permits, compliance, and personal information should be referred to the corresponding position or institution. |
| Conclusion boundaries | Conclusion boundaries of this occupation | Work conclusions state only verifiable parameters and testing, verification, repair, and permit records, and distinguish field observation facts from judgment and inference and pending verification; unauthorized judgments and commitments must not be made on matters beyond one's authorization (engineering design, statutory inspection of pressure piping and special equipment, and interconnection and permit and acceptance conclusions); when pressure, flow, or electrical parameters exceed limits, welding or pressure testing fails, instruments are unverified, or records do not match the site, work must be suspended and escalated or referred, and conclusions must also withstand review by superiors, operations, quality, and regulatory inspections. | Conclusion boundaries of adjacent positions | Conclusions from positions in the same group and adjacent positions are mostly limited to this project, this process, and this duty level, and usually do not constitute a determination of equipment safety, compliance, or legal liability; cross-disciplinary conclusions and those involving engineering, inspection, permits, or legal use have limits on their applicability. |
Core work
- 01Operation monitoring and adjustment · Control room monitoring and parameters
Monitor and control the operating activities of geothermal power generation facilities, monitor and adjust geothermal plant equipment or systems, and adjust generation systems as needed to meet load and distribution demand while keeping records.
- 02Fault identification and repair · Instrumentation and control and electrical
Identify and correct faults in geothermal plant equipment and electrical systems and instrumentation or controls, maintain and verify or repair instrumentation and control and electronic devices, and carry out preventive and routine maintenance.
- 03Data and records · Logs and reports
Collect and record operating data from the geothermal plant or well field, write and maintain work logs, reports, or other work documents, and keep them traceable.
- 04Ground source heat pump installation and commissioning · Heat pumps and loops
Install, test, and maintain residential and commercial ground source heat pumps, install and maintain or repair ground source or water source coupled heat pumps, and carry out flushing and venting and other commissioning preparations for newly installed systems.
- 05Loop and piping work · Pressure testing and welding
Perform pre- and post-installation pressure, flow, and related tests on vertical and horizontal geothermal loop piping, weld high-density polyethylene and similar piping, and excavate, lay, and backfill trenches.
- 06Design, selection, and anti-corrosion · Drawings and processes
Design and lay out geothermal heating systems according to building characteristics and heating and cooling demand and piping and equipment requirements, calculate heat loss and heat gain coefficients, and apply coatings or operate anti-corrosion systems.
What must be checked item by item before taking a job?
Pre-entry checking statement | The following six items are used to check item by item before applying and starting the job, to avoid inferring actual duties and authorization from the job title or promotional language; the checking results should be based on written recruitment information, the employment contract, position descriptions, and safety, process, and permit rules and documents, and should be continuously confirmed after starting. This page lists checking directions only and does not constitute a formal conditions list for any institution or project. Special note: this occupation often involves hazardous conditions, contaminants, energized and pressurized equipment, ground disturbance, confined space, and height work, so be sure to confirm the position's specific requirements for safety training, protective equipment, work permits, certificate requirements, and data disclosure.
- 01
01 Actual duties and authorization boundaries of the position | Check whether the role truly involves independent installation or repair or instrumentation and control maintenance or pressure testing and commissioning work, or is mainly assisting, carrying, and recording; check the tools, instruments, test equipment, vehicles, and data platforms that may be used, the permit, certificate, and protection requirements for energized, pressurized, ground disturbance, confined space, and height work, the approval requirements for external disclosure of records and compliance data, and the collaboration and reporting lines with operations, maintenance, safety, and quality teams.
Notes on checking points | Position titles are similar but duties and authorization differ greatly: some focus on geothermal plant instrumentation and control and electrical maintenance, some on ground source heat pump installation and commissioning, some on loop drilling, excavation, and welding, some on patrol and data recording, and some on repair and testing; different institutions and jurisdictions also differ in the authorization for operating energized and pressurized equipment, welding and pressure testing, ground disturbance and confined space work, and permits and acceptance and data disclosure.
- 02
02 Safety, environmental, and occupational health requirements | Check whether the institution requires and provides: training and permits for work permits, energy isolation, lockout and tagout, confined space, height work, and ground disturbance work; certificate requirements for the installation, welding, and inspection of pressure piping and special equipment; protection and emergency response requirements for welding, pressure testing, lifting, excavation, and grouting work; requirements for contaminants, waste, excavated soil, noise, and restoration; occupational health, medical examinations, and protection against noise, high temperature, and chemical exposure; equipment inventory and operating data and confidentiality and personal information management requirements; and the reporting and investigation process for accidents, anomalies, and quality problems.
Notes on checking points | This occupation often involves energized, pressurized, and rotating equipment, ground disturbance, excavation, welding, confined space, and height work, and noise and contaminant conditions, and usually requires electric power work safety and special equipment and occupational health training, protective equipment, work permits, and emergency drill requirements.
- 03
The O*NET catalog lists 5 certification names, which serve only as a discovery entry. On 2026-10-03 IGSHPA was checked: the old AI, CGD, CGI, and CRD courses are being phased out, and AI is arranged case by case only because of related program requirements; the new system is modular by design, installation, service, and inspection directions, and renewals of existing certificates and new registrations are checked separately. AEE CGD has stopped accepting new applications, while existing holders still have a renewal path. NGWA CVCLD is a voluntary closed-loop drilling certification requiring being at least 20 years old, 24 months of continuous related drilling experience, an examination, and documentation, and is not a general zero-experience entry certificate nor a substitute for local licensing. Historical names in the catalog must not be written across the board as currently registrable or required for all geothermal positions.
U.S. O*NET Job Zone 1-2 and SVP below 6.0 are a general preparation range. The education question asks 'what education do new hires need', and 66% answer a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college, no degree; this is not the education distribution of existing workers and does not prove one uniform education or training duration for all positions. Actual entry conditions are checked against the target posting and jurisdiction.
- 04
04 Wages, hours, and employment contract measures | Check the composition of the offered pay (base wage, rotation or shift and site allowances, overtime and maintenance or project performance and bonuses, continuing education and certification support, and protective equipment and tools and vehicle arrangements), the hours, rotation, on-call, maintenance outage, and travel arrangements, the contract term and the unit or project source, the probation period and assessment measures (work quality, safety, records, and collaboration indicators), and whether equipment and process data and trade secrets and intellectual property ownership and insurance arrangements are involved.
Pay checking suggestion | Ask about the base wage, bonus types, overtime and shift differentials, benefits, hours, and on-call and travel arrangements; contract items being asked about cannot be described as universal across all positions, and this occupation's income cannot be inferred from parent occupation percentiles.
- 05
05 Interface authority with operations, maintenance, safety, and quality parties | Check the path for confirming work plans, maintenance windows, outage requests, and isolation requests, the arrangements for using and maintaining instrumentation, test equipment, tools, vehicles, and data platforms, the path for spare parts, materials, vendor support, and deviation handling, the signing of testing and maintenance records and the approval for external submission, the reporting path for anomalies, accidents, environmental, and quality problems, and cross-crew and contractor work and record handover and the division of responsibility.
Notes on checking points | The interface relationships with operations, maintenance, instrumentation and control, safety, environmental, quality, and contractor parties determine the boundaries of work, records, and responsibility, and must be clarified in advance.
- 06
Truthfully record installation, operation, repair, and testing; lawful corrections keep the original value, the actual correction time, the reason, the basis, and the review, missing items remain pending verification, and backdating, falsification, and traceless overwriting are prohibited.
Notes on checking points | The traceability and recordkeeping requirements for work permits, parameters, testing, verification, repair, training, and permit records determine how safety, quality, and responsibility are defined; the templates, deadlines, revision, archiving, access authority, and retention period specifications must be clarified in advance (data that is controlled, involves trade secrets, or involves personal information must also be managed according to confidentiality and minimum-necessary requirements).
Career direction comparison
How do geothermal technician work directions compare with adjacent occupations?
Preface | The comparison below is organized in four columns: 'occupational direction — core work and outputs — key difference — what it is better suited to'. Geothermal, hydroelectric, biomass, natural gas, and electric power operation positions are often linked within the same generation group or energy service provider, but linkage does not mean they are interchangeable; when choosing across directions, the process, procedures, permits, certificates, and responsibility boundaries of that direction must be learned anew.
| Occupation direction | Core work and outputs | Key differences | Which choice fits better |
|---|---|---|---|
| This occupation: Geothermal Technicians (O*NET/SOC 49-9099.01, Geothermal Technicians) | Core work and outputs: monitor and adjust the operation of geothermal plant equipment or systems, identify and correct equipment and electrical and instrumentation and control faults, maintain and verify instrumentation and control and electronic devices, collect and record operating data and work logs, install, test, and maintain ground source heat pumps and loop piping, carry out pressure testing, flushing, and commissioning preparations, and operate excavation, grouting, and coiled tubing units and similar equipment; outputs are installation, patrol, testing, verification, repair, and record results (O*NET/SOC 49-9099.01). | Key difference | The object is geothermal power generation equipment and ground source heat pumps and loops; the exact tasks also include design and layout, load calculation, and equipment selection. It cannot be inferred that this occupation is uniformly an engineer's assistant or that adjacent occupations have no maintenance or installation duties at all. | Better suited to people who are willing to work hands-on between plant equipment and building sites and trenches, can complete installation, testing, and repair according to drawings, process cards, and procedures, judge anomalies from parameters and instruments and report within authorization, and are willing to work outdoors and under hazardous conditions according to safety and permit requirements. |
| Hydroelectric Plant Technicians (51-8013.04) | Core work and outputs: monitor and adjust the operation of hydro generating units and auxiliary equipment according to procedures, carry out repair, testing, and maintenance, and record parameters and defects; outputs are hydroelectric on-site operation and maintenance records. | Key difference | Hydroelectric plant technicians focus on the operation and maintenance of hydroelectric generation systems; geothermal technicians additionally cover ground source heat pumps. The difference in object does not prove who can independently make all statutory judgments. | Better suited to people who want to work on on-site operation and maintenance of hydraulic works and hydro units; this occupation leans more toward geothermal plant instrumentation and control and electrical work and ground source heat pumps and loop piping. |
| Biomass Plant Technicians (51-8013.03) | Core work and outputs: maintain and repair fuel conveying and boiler and turbine and flue gas treatment equipment, monitor operating parameters, and record defects and handling; outputs are biomass on-site operation and maintenance records. | Key difference | Biomass technicians take the operation and maintenance of biomass power generation equipment as their object; geothermal technicians cover geothermal generation and heat pumps. Actual equipment knowledge and activity authority require separate checks. | Better suited to people who want to work on on-site maintenance of biomass fuel and boiler and turbine and environmental protection equipment; this occupation leans more toward geothermal plant instrumentation and control and electrical and ground source heat pump loops. |
| Gas Plant Operators (51-8092.00) | Core work and outputs: operate and monitor gas treatment and compression and transport equipment according to procedures, adjust conditions and handle alarms, and patrol and record parameters and defects; outputs are operating actions and parameter records. | Key difference | Gas plant operators handle gas production and distribution equipment, while geothermal technicians handle geothermal generation and heat pumps; the size of the installation or maintenance share or the complete exclusion of interlock responsibility is not inferred. | Better suited to people who want to operate and monitor continuously according to procedures in process industry control rooms and on site; this occupation leans more toward hands-on installation and repair and pressure testing and commissioning and patrol work. |
| Power Plant Operators (51-8013.00) | Core work and outputs: start, stop, and adjust units and auxiliary equipment according to operating procedures, monitor the control room and handle alarms, patrol equipment and record parameters and actions, and support maintenance and testing; outputs are operating actions and parameter records. | Key difference | Power plant operators control the boilers, turbines, generators, and other equipment that produce electricity; geothermal technicians also cover heat pump installation and maintenance, and operation monitoring tasks may overlap. | Better suited to people who want to focus on operating and monitoring and patrolling and recording parameters in the control room according to procedures; this occupation leans more toward on-site installation and repair and instrumentation and control maintenance and testing work. |
| Power Distributors and Dispatchers (51-8012.00) | Core work and outputs | Coordinate power flow and steam flow, control voltage, operate switches, and communicate with operations personnel to carry out distribution actions; the specific institution's dispatch approval authority requires separate checks. | Key difference | Power distributors and dispatchers coordinate and regulate power flow, voltage, and distribution, while geothermal technicians focus on technical tasks at the related facilities; a uniform dispatch approval authority cannot be inferred from an adjacent name. | Better suited to people who want to operate, coordinate, and record according to instructions within the dispatch system; this occupation leans more toward hands-on on-site installation and repair and instrumentation and control maintenance. |
How to choose
Conclusion | Geothermal Technicians 49-9099.01 covers generation operation technology and residential and commercial heat pumps; the other directions respectively handle hydroelectric, biomass, gas processing, generation control, and grid distribution. Tasks may overlap, and qualifications and authorization are checked against the specific activities and institution, without inferring exclusive responsibility or a uniform hierarchy from the occupational name.
Editorial comparison | first compare the task objects and the real training requirements, then check the target role's activity qualifications, working hours and responsibilities. Adjacent occupations are not an automatic transfer path, and interest inventories are only for self-reflection.
AI's impact on the occupation
Will AI replace geothermal technicians?
Insufficient evidence: no precise AI exposure, adoption, substitution, productivity or wage causality for 49-9099.01 was obtained. Editorial task analysis | reversible steps may be explored, such as organizing logs, classifying alarms, retrieving manuals and drafting repair work orders. No precise occupation AI exposure level, adoption rate, substitution rate or wage causality was obtained. PLC control differs from generative AI, and popular software mentions do not prove actual usage frequency. On-site adjustment, installation and maintenance, and permit responsibilities are borne under real authorization. BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished. AI Impact Score 25% is an editorial estimate. Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+25+0)/3+0.5)=25; fermatmind-ai-impact-v1; 2026-10-18.The three tasks, ratings and sources are listed in the FermatMind method source record on this page.
AI assessment method and sources
FermatMind AI Impact Score estimation method v1
FermatMind / 费马测试 · 2026-10-18
- Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+25+0)/3+0.5)=25; fermatmind-ai-impact-v1; 2026-10-18.
- Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
- Operational monitoring and adjustment — 50/100; weight=1/3
- Fault identification and repair — 25/100; weight=1/3
- Heat pump and loop installation and commissioning — 0/100; weight=1/3
Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.
Which on-site and documentation tasks can AI handle?
Technically feasible: a task may technically be reachable by a tool; this is only a feasibility judgment, it does not mean use is permitted, nor that an institution has adopted it.
Which steps will actually be adopted?
Institutional and regulatory adoption: whether to introduce it depends on electrical safety production, pressure piping, special equipment, environmental protection and occupational health requirements, as well as the institution's process, safety and permit systems; safety, quality and compliance responsibilities cannot shift because a tool is introduced.
Will AI reduce geothermal technician jobs?
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Task impact matrix
| Work direction | Task | Current changes | Human control points |
|---|---|---|---|
| Monitor and adjust the operation of geothermal plant equipment or systems and adjust the generating system as needed | Operational monitoring and adjustment | Editorial assistance idea: trends and alarm categorization can be assisted, while adjustment and safety judgments remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Monitoring, adjustment and load allocation are completed by the individual under procedures and authorization |
| Identify and correct equipment, electrical, instrument or control faults and maintain and calibrate instruments | Fault identification and repair | Editorial assistance idea: fault-code and manual retrieval can be assisted, while determination and repair remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Fault determination, repair and calibration are completed by the individual under procedures and certification |
| Collect and record operating data and write and maintain work logs and reports | Data and records | Editorial assistance idea: consolidation and formatting can be assisted, while data and conclusions remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Data authenticity and record completeness are the individual's responsibility |
| Install, test and maintain ground-source heat pumps and loops, performing flushing, venting and pressure testing | Heat pump and loop installation and commissioning | Editorial assistance idea: organizing ledgers and work orders can be assisted, while installation and pressure-test judgments remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Installation, pressure testing and commissioning quality are the individual's responsibility under process cards and procedures |
| Weld high-density polyethylene piping and excavate, lay and backfill trenches | Pipe welding and earthwork | Editorial assistance idea: organizing records can be assisted, while welding and work safety remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Welding and earthwork quality and permits are executed by the individual under certification and permits |
| Design and lay out according to building, heating and cooling and equipment requirements, calculate heat loss and gain, and apply anti-corrosion measures | Design selection and anti-corrosion | Editorial assistance idea: calculations and drawing drafts can be assisted, while selection and judgment remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Selection, layout and anti-corrosion judgments are confirmed by the individual together with engineers |
| Review and maintain records and provide or disclose them under authorization | Records, review and disclosure | Editorial assistance idea: organizing and archiving records can be assisted, while disclosure and compliance responsibility remain the human's responsibility; no evidence of actual adoption or productivity gain was obtained. | Record authenticity and disclosure boundaries are handled by the individual under authorization |
Why does employment evidence lead to different conclusions?
Tasks and context support editorial assistance ideas; they cannot prove that productivity has already improved.
O*NET 49-9099.01 detailed information
View source ↗- Study object
- Tasks and work context are occupation-level descriptions, showing high exposure to on-site operation, judgment and hazardous conditions
- Main conclusions
- Precise tasks support considering documentation assistance; they do not prove on-site substitution difficulty, actual productivity gains or employment outcomes.
- Usage limits
- An occupation-level description, not an automation rate or quality risk rating
BLS OEWS (2025, parent measure 49-9099.00 as presented via O*NET)
View source ↗- Study object
- A point-in-time sample estimate of US wages
- Main conclusions
- US 2025 parent occupation median wage 49,230 USD per year and 23.67 USD per hour; it cannot be regarded as Geothermal Technicians themselves or as an AI wage effect. OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels.
- Usage limits
- Not applicable to other jurisdictions; it is the parent occupation measure; the median is not a starting salary
BLS direct 2025—2035 parent occupation 49-9099 projections
View source ↗- Study object
- Projections include growth and replacement demand
- Main conclusions
- BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
- Usage limits
- Projections are not actual hires; they differ in basis from the point-in-time OEWS employment estimate
O*NET 49-9099.01 hot technologies
View source ↗- Study object
- The 2025 national job-posting mention shares for the 6 software items on the precise hot technologies page are all NA; the detail page lists 9 software categories
- Main conclusions
- Software mentions describe a classification of job-posting data; they cannot prove real usage rates, automation or transfer of responsibility.
- Usage limits
- No shares are given; technology mentions do not equal adoption or degree of automation
NIST AI RMF 1.0
View source ↗- Study object
- A general AI risk governance framework
- Main conclusions
- Adopting digital tools requires clear ownership of responsibility, protection of operations and maintenance data and permit materials, rollback plans and audit trails
- Usage limits
- Not electrical safety or pressure piping or special equipment or environmental protection standards
Why do different work directions face different impacts?
The three directions below are editorial trial suggestions based on occupation tasks; there is no data on realized productivity gains, actual adoption or substitution rates, so the original draft and the tool-assisted draft must be compared and human review retained.
Parameter and maintenance data recording, trends and reports
What AI mainly changesEditorial idea: consolidate logs and parameters, and check for duplicate and abnormal labels; the real effect still needs testing.
Still the human's responsibilityHumans verify data sources, units, missing items and time windows, and do not treat trend labels as equipment qualification or handling approval.
Fault codes, manual retrieval, repair orders, spare parts and documents
What AI mainly changesEditorial idea: retrieve manuals and codes and organize repair work orders or spare-part drafts; retrieval alone cannot diagnose automatically.
Still the human's responsibilityHumans verify version, model, on-site status and authorization; work, protective device switching and maintenance approval follow the actual system.
Training, knowledge bases and work statistics
What AI mainly changesEditorial idea: organize training materials, knowledge bases and statistics drafts, and record the basis and the errors.
Still the human's responsibilityHumans verify courses, qualification validity, permit status and material authenticity; tools do not issue authorization.
Once AI enters a professional workflow, the chain of responsibility must not break
Responsibility preface | efficiency can be outsourced to tools, but hands-on field work, safety, permits and quality responsibility cannot. The five steps below are the human responsibility points that must be preserved before and after adopting any digital tool.
- Requirements and boundary confirmation
Requirements and boundaries: work objectives, process requirements, safety boundaries and permit conditions must be determined by personnel with the corresponding authorization; tools do not replace judgment on drawings, processes or work permits.
- Scope of tool handling
On-site confirmation and quality: confirming the status of equipment, piping and instruments, and welding, pressure testing, flushing, commissioning, isolation and lockout/tagout must be completed by the individual under procedures and certification requirements; tools do not replace on-site verification or quality determination.
- Human review
Data and judgment: parameters, test results and analysis trends must be checked and reviewed by the individual; tool output must not be used directly as the basis for energization, commissioning, acceptance or reporting, and judgments must not exceed what procedures and data support.
- Record trail
Safety, permits and data: live, pressurized, excavation, confined space and work-at-height activities, and controlled data or data involving trade secrets or personal information, must be managed under minimum-necessary, permit and retention-period requirements, and tools must not be used to send such data out or to generate unverified content.
- Authorization and responsibility
Disclosure and change: maintenance plans, permits, acceptance, external disclosure and process changes must stay within the scope of authorization, safety and quality requirements; when parameters exceed limits, pressure tests fail, or records conflict with on-site conditions, report upward per the system.
Professional risks of using AI
Using tool-generated trends, diagnoses or conclusions directly for energization, commissioning or external reporting
May cause misoperation or safety and quality consequences
Control method:Before energization, commissioning and report submission, the individual must verify on-site status, process basis and calibration records, with an audit trail
Controlled operations and maintenance data, or data involving trade secrets, being mis-sent or flowing into unauthorized channels
May violate electrical safety, confidentiality and data management requirements
Control method:Limit purpose, retention period and permissions; controlled materials are not uploaded to external services or unauthorized environments
Using tools in place of on-site confirmation of equipment status, isolation and pressure test judgment
May cause misoperation or personal and equipment accidents
Control method:On-site confirmation, isolation, pressure testing and commissioning must be completed under procedures by personnel with the corresponding authorization and certification
Replacing real installation, testing and maintenance records with tool-generated records or trends
Distorted records affect equipment safety, quality traceability and acceptance
Control method:Records must reflect the actual work and test process; generating unverified content is prohibited
Responsibility ownership blurred: unclear who confirms the site, who works and isolates, who reviews, and who approves energization or disclosure
When safety, quality or acceptance disputes arise, responsibility cannot be defined
Control method:Before adopting a tool, define the on-site confirmation, work, review and approval path and the responsible persons, with an audit trail
How should different groups respond?
Entry and shadowing stage
Use tools in reversible supporting steps: organizing parameters and inspection data, drafting logs and reports, organizing spare-part and tool inventories, and retrieving drawings and manuals. On-site installation, welding, pressure testing, maintenance, and live or pressurized work follow procedures, mentoring, certification and authorization.
Independent field work role
Use digital tools for data recording, trend viewing, fault-code lookup, and document and repair-order drafts. Confirming equipment status and making isolation, pressure testing and commissioning judgments remain the individual's own responsibility under procedures, certification and authorization.
Skilled, crew and quality role
Use tools to consolidate multi-source data, equipment trends and predictive maintenance prompts, and to organize knowledge bases and training materials. Complex or controlled matters (switching protective devices in or out and bypassing them, pressure tests and special equipment inspections, and judging major defects) are confirmed by the individual together with operations and quality roles.
Technical and crew management role
Use tools for work statistics, quality reports, documentation and knowledge management. Maintenance plans, inspections, acceptance and conclusions disclosed externally must be human-approved with an audit trail.
FAQ about AI and career development
Will geothermal technicians be replaced by AI?
Existing materials cannot assert whether it will or will not be replaced by AI. Logs and retrieval can be trialed as assistance; actual adoption and role restructuring still need evidence. On-site status, safety and permits are verified by the personnel with the corresponding duties, and authorization is not produced by tools.
Source:O*NET tasks and contextOriginal material ↗
Do you need to write code to enter the field now?
No coding entry threshold is inferred from the software list. The hot technologies page shows 6 items — AutoCAD, Excel, Office, Outlook, Word and SAP — whose 2025 US job-posting mention shares are all NA; the detail page lists 9 additional software categories. Verify actual tools and coding requirements against the target posting.
Source:O*NET hot technologies (share NA)Original material ↗
Which tasks are most affected by AI?
Editorial suggestion | in an authorized environment, parameters and logs, manual retrieval, and repair work order and spare-part material drafts may be trialed; verify the real models, methods, units, on-site conditions and permits. No task exposure ranking or actual effect has been established for this occupation, so which tasks are most affected cannot be judged.
Source:O*NET precise tasksOriginal material ↗
Will this occupation shrink by 2035?
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Source:BLS parent occupation projections 2025—2035Original material ↗
Can AI make pressure testing, energization or commissioning decisions in place of technicians?
It cannot be self-assumed. Pressure testing, welding quality, switching protective devices in or out, energization and commissioning belong to the responsibility of work and inspection roles that carry the corresponding qualification and certification requirements, and must be performed by the individual based on drawings, processes, procedures and on-site status, with responsibility for the consequences. AI can assist with data and retrieval, but cannot replace on-site confirmation, isolation and permits, authorization and acceptance of responsibility, nor statutory inspection of pressure piping and special equipment.
Source:An editorial responsibility suggestion; statutory test and work qualifications and permits are verified separately according to the actual activityOriginal material ↗
Which capabilities are less easily replaced?
The ability to complete hands-on work under live, pressurized and hazardous conditions following procedures; the ability to identify anomalies from parameters, instruments, noise and vibration; craftsmanship in welding, pressure testing, commissioning and troubleshooting; and command of on-site safety, permits and record traceability together with the judgment to report upward under authorization.
Source:O*NET tasks and work contextOriginal material ↗
How should the long-term prospects be viewed?
Judge with three layers of evidence: technical feasibility; institutional and regulatory adoption (depending on electrical safety production, pressure piping, special equipment, environmental protection and occupational health requirements); and job outcomes (this page uses the parent occupation 49-9099.00 measure). Combine local geothermal, ground-source heat pump and new energy installation and maintenance demand with certified labor supply rather than looking only at tool demonstrations.
Source:An editorial verification method; ILO serves only as general exposure backgroundOriginal material ↗
Editorial judgment | data organization, retrieval and document drafting may be trialed as assistance; this round obtained no actual adoption, productivity gain or substitution rate. Equipment status, the credibility of pressure records, isolation permits, protective device switching and handover must be verified by humans according to the activity, real materials and authorization, and tool drafts must not be written up as completed operations or formal acceptance.
Mainland China pay reference
Occupation name mapping | Geothermal Technicians (O*NET/SOC 49-9099.01 Geothermal Technicians; in job postings and within the industry often called Geothermal Service Technician, Instrumentation and Control Technician, Instrumentation and Electrical Technician, Operations and Maintenance Technician, Plant Mechanic, Plant Technician and so on; distinct in task object and authorization level from Geothermal Production Managers, Hydroelectric Technicians, Biomass Plant Technicians, Gas Plant Operators, Power Plant Operators, Power Distributors and Dispatchers, Electrical and Electronics Repairers of Powerhouse, Substation and Relay equipment, Solar Thermal Installers and Technicians, Stationary Engineers and Boiler Operators, and Wind Turbine Service Technicians)
Classification comparison note | This page covers the precise occupation O*NET 49-9099.01 (Geothermal Technicians), which differs in task object from Geothermal Production Managers (11-3051.02), Hydroelectric Technicians (51-8013.04), Biomass Plant Technicians (51-8013.03), Gas Plant Operators (51-8092.00), Power Plant Operators (51-8013.00), Power Distributors and Dispatchers (51-8012.00), Electrical and Electronics Repairers of Powerhouse, Substation and Relay equipment (49-2095.00), Solar Thermal Installers and Technicians (47-2152.04), Stationary Engineers and Boiler Operators (51-8021.00) and Wind Turbine Service Technicians (49-9081.00); authorization must be checked against the actual activity. International occupation classifications such as ISCO-08 can only indicate the broad position of electrical, electronic, electromechanical and energy equipment installation and maintenance roles and cannot replace the US SOC or mainland China's qualification, occupation classification and statistical measures. The job boundaries defined in mainland China by electrical safety production, pressure piping, special equipment, environmental protection and occupational health systems are not in exact one-to-one correspondence with the US occupation on this page; the statistical measures and legal environments differ, and no numerical conversion is made.
Public recruitment sample (historical notice, not official statistics)
Occupation definition | The geothermal technicians on this page are the precise occupation O*NET 49-9099.01 (Geothermal Technicians): they perform technical work related to geothermal power generation and geothermal heat pumps at geothermal power plants or single-family and commercial installations, monitor and control the operation of geothermal power facilities and maintain and repair them as needed, and install, test and maintain residential and commercial ground-source heat pumps. Common job titles include Geothermal Service Technician, I and C Technician, I and E Technician, Operations and Maintenance Technician, Plant Mechanic and Plant Technician. The outputs are installation, inspection, testing, calibration, maintenance and record results; the above uses the US measure, while mainland China's systems and statistical measures for electrical safety production, pressure piping, special equipment, environmental protection, occupational health, excavation and confined spaces are described elsewhere on this page.
Mainland China urban non-private units (industry category measure, for reference)
Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Mainland China urban private units (industry category measure, for reference)
Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Precise national occupational wage for this occupation in mainland China
Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
With different educational backgrounds, which role directions do geothermal technicians usually start from?
Mainland China section | This round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted. For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval.
| Educational background | Common role directions | Notes and verification suggestions |
|---|---|---|
| Education and vocational training in electromechanical, electrical, HVAC, energy or welding related fields | Verify separately against the target role | U.S. O*NET Job Zone 1-2 and SVP below 6.0 are a general preparation range. The education question asks 'what education do new hires need', and 66% answer a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college, no degree; this is not the education distribution of existing workers and does not prove one uniform education or training duration for all positions. Actual entry conditions are checked against the target posting and jurisdiction. |
| Instrumentation and control, electrical, mechanical, piping, welding and pressure testing skills | Verify separately against the target role | Tasks include instrument maintenance and calibration, electrical and mechanical repair, and heat pump loop testing; the software detail page lists 9 categories and the mention shares for the 6 items on the hot technologies page are all NA. The specific skill mix is verified against the target role, and it is not claimed that every role covers all trades. |
| Electrical safety, work permits, energy isolation, confined space and excavation training | Field work role | For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval. |
| Welding or operating and inspection qualifications for pressure piping and special equipment (where involved) | Related equipment or operations listed in the catalogue under law | O*NET's catalogue lists 5 certification names, which serve only as a discovery entry point. IGSHPA was checked on 2026-10-03: the AI, CGD, CGI and CRD legacy courses are being phased out, and AI is arranged case by case only because certain programs require it; the new system is modular by direction such as design, installation, repair and inspection, so renewal of existing certificates and new registration must be checked separately. AEE has stopped accepting new CGD applications, while existing holders still have a renewal path. The NGWA CVCLD is a voluntary closed-loop drilling certification that requires being at least 20 years old, 24 consecutive months of relevant drilling experience, an examination and supporting documentation; it is not a general entry permit for people with no experience, nor does it replace local permits. Historical names in the catalogue must not be written as currently open for application or as required for every geothermal role. For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval. |
The US wages at five percentiles on this page come from the 2025 parent occupation 49-9099.00; projections use the BLS direct 2025—2035 series, and context comes from the precise occupation. OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels. China section: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Which industries and directions use this occupation?
Electricity and heat production and supply (including geothermal and new energy power generation)
Geothermal plant operations and maintenance roles can be grouped under electricity and heat production and supply; the National Bureau of Statistics publishes average wages of urban unit employees by industry category, an industry or five-category aggregation measure that does not break out this precise occupation, so this page does not substitute that industry average for this occupation's wage.
Building installation, HVAC and ground-source heat pump construction
Residential and commercial ground-source heat pump and loop installation and commissioning roles can be grouped under building installation and related specialty work; that measure is an industry average, is not equal to this occupation's wage, and is not filled in on this page.
Business services and manufacturing (including equipment and O&M services)
2024 US parent occupation industries: administrative support 16%, manufacturing 11%, wholesale 11%, construction 10%, retail 10%; this cannot be used to infer this precise occupation's employer structure or a China industry correspondence.
Will AI affect geothermal technician wages?
Insufficient evidence: no generative AI exposure level, adoption rate, substitution rate or wage causality for 49-9099.01 was obtained; log and retrieval assistance is editorial analysis.
US pay reference
How much do US geothermal technicians earn (parent occupation 49-9099.00 measure as presented via O*NET)?
US 2025 parent occupation 49-9099.00 wages: the 10th/25th/50th/75th/90th percentiles are 36,080/42,170/49,230/61,900/77,040 USD per year, with hourly wages of 17.35/20.28/23.67/29.76/37.04 USD. BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished. OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels.
US wage distribution
| Position in the wage statistics | Annual wage reference | Conversion boundaries | How to read this position |
|---|---|---|---|
| 10th percentile (lower boundary point) | 10th percentile annual wage 36,080 USD / hourly wage 17.35 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure) | Official annual wage, not personal monthly income | The 10th percentile is the lower part of the 2025 parent occupation wage distribution and cannot be treated as the starting pay of a new geothermal technician or of an installation helper role. |
| Median (50%) | Median annual wage 49,230 USD / median hourly wage 23.67 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure as presented via O*NET) | Official annual wage, not actual personal take-home pay | The median is the midpoint of the 2025 parent occupation wage distribution, not the typical wage, starting pay or education growth trajectory of the precise geothermal occupation. |
| 90th percentile (upper boundary point) | 90th percentile annual wage 77,040 USD / hourly wage 37.04 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure) | Official annual wage, not actual personal take-home pay | The 90th percentile is the upper part of the 2025 parent occupation wage distribution and does not prove that welding certificates, hazardous work or shift work cause that income. |
Pay: median:Median annual wage 49,230 USD / median hourly wage 23.67 USD (2025, BLS OEWS, parent occupation measure 49-9099.00 as presented via O*NET on the 49-9099.01 page);Scope | US parent occupation 49-9099.00 (Installation, Maintenance, and Repair Workers, All Other) national median (2025, BLS OEWS, presented via O*NET on the 49-9099.01 page); boundaries | O*NET states explicitly on the 49-9099.01 page that the wage data are taken from Installation, Maintenance, and Repair Workers, All Other, and this page relays that parent measure faithfully without calling it 49-9099.01's own value; the median is the midpoint of a distribution and is not a starting salary; OEWS excludes benefits and non-production bonuses and includes production bonuses.
Pay: 10th percentile:10th percentile annual wage 36,080 USD / hourly wage 17.35 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure);Scope | 2025 US parent occupation 49-9099.00 wage percentiles; boundaries | only a distribution position, with no inference about entry-level pay, education or qualification causality, or Geothermal Technicians' own wages.
Pay: 25th percentile:25th percentile annual wage 42,170 USD / hourly wage 20.28 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure);Scope | 2025 US parent occupation 49-9099.00 wage percentiles; boundaries | only a distribution position, with no inference about entry-level pay, education or qualification causality, or Geothermal Technicians' own wages.
Pay: 75th percentile:75th percentile annual wage 61,900 USD / hourly wage 29.76 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure);Scope | 2025 US parent occupation 49-9099.00 wage percentiles; boundaries | only a distribution position, with no inference about entry-level pay, education or qualification causality, or Geothermal Technicians' own wages.
Pay: 90th percentile:90th percentile annual wage 77,040 USD / hourly wage 37.04 USD (2025, BLS OEWS, parent occupation 49-9099.00 measure);Scope | 2025 US parent occupation 49-9099.00 wage percentiles; boundaries | only a distribution position, with no inference about entry-level pay, education or qualification causality, or Geothermal Technicians' own wages.
How should this set of US wage figures be understood?
Is the median an entry-level wage?
The 2025 parent occupation 10th—90th percentile annual wages are 36,080—77,040 USD, which only shows the spread of the parent occupation distribution; no wages for Geothermal Technicians themselves and no causal decomposition of the differences were obtained.
Which statistical program do these figures come from?
Wage item | May 2025 BLS OEWS parent occupation SOC49-9099 regular pre-tax wages, displayed via the O*NET national wage page, excluding self-employment or employer benefits; production bonuses and commissions are checked separately from non-production bonuses and overtime premiums. Employment projections are separately the BLS direct table 1.2 and are not regarded as statistics for 49-9099.01 itself.
Can education requirements be used to infer a wage ceiling?
US O*NET Job Zone 1-2 with SVP below 6.0 is the general preparation range. The education question asks what education new entrants need; 66% answered a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college with no degree. This is not the education distribution of current workers and does not prove that every role has the same education or training duration. Actual entry conditions are checked against the target posting and jurisdiction. Education responses do not prove a wage ceiling or a certification income premium.
Can the hourly wage be used to infer personal annual income?
Official hourly and annual wages each take the independently rounded value from the original table and are not precisely divided by 2080 to infer personal monthly pay; personal income also depends on actual hours, contract and pay items.
How much do US wages differ by industry?
| Industry | Median wage for this occupation within that industry | How to understand |
|---|---|---|
| Administrative and Support Services | Insufficient evidence: this round obtained no wage median for this industry or subcategory that can be read for this occupation (49-9099.01); industry averages or third-party estimates are not substituted. | Administrative support 16% comes from the 2024 parent occupation 49-9099.00; it is not the industry share of Geothermal Technicians. |
| Manufacturing | Insufficient evidence: this round obtained no wage median for this industry or subcategory that can be read for this occupation (49-9099.01); industry averages or third-party estimates are not substituted. | Manufacturing 11% comes from the 2024 parent occupation 49-9099.00; it is not the industry share of Geothermal Technicians. |
| Utilities / Power Generation | Insufficient evidence: this round obtained no wage median for this industry or subcategory that can be read for this occupation (49-9099.01); industry averages or third-party estimates are not substituted. | Geothermal power generation tasks relate to generating facilities; no industry share for this precise occupation was obtained, and it cannot be inferred from the parent occupation distribution. |
| Construction and Operations Services | Insufficient evidence: this round obtained no wage median for this industry or subcategory that can be read for this occupation (49-9099.01); industry averages or third-party estimates are not substituted. | Residential and commercial ground-source heat pump installation is within the task scope; the 10% construction share of the 2024 parent occupation cannot be treated as the share or wage of geothermal installation roles. |
Which factors affect US geothermal technician wages (parent occupation 49-9099.00 measure)?
Industry, structure and cycle
Compare the project cycle, working hours and pay method of the target contract; this round has no independent causal estimate of these factors on geothermal technician wages.
Region and cost of living
Compare the real contract and cost of living in the target area; a parent occupation national wage cannot be used to infer local geothermal technician income or purchasing power.
Education, certification and scope of responsibility
Check job training, qualifications, shift arrangements and pay terms separately; no independent estimate was obtained of the effect of certification or hazardous work on income in this precise occupation.
US employment prospects
Employment: employment level
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.Scope | BLS direct 2025—2035 parent occupation 49-9099 data; boundaries | BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Employment: growth rate
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.Scope | BLS direct 2025—2035 parent occupation 49-9099 data; boundaries | BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Employment: average annual job openings
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.Scope | BLS direct 2025—2035 parent occupation 49-9099 data; boundaries | BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Occupation fit guide
As a geothermal technician, which interests, abilities and working styles matter more?
First use the H1 desktop exercise to observe calculation, evidence stratification and handover behavior; it cannot verify hazardous on-site work ability, certification outcomes or long-term career fit. Further exploration requires checking real job training and activity conditions.
You may be better suited to: Fit signals: willing to be responsible for equipment, site and personnel safety and quality within the scope of procedures and authorization; able to switch between plant equipment, building sites and pipe trenches while keeping parameters and records in focus; able to hold to process and review under maintenance windows and hazardous conditions and to report per the system when anomalies occur or authority is exceeded.
These situations require caution: Caution signals: difficulty facing long-term outdoor and hazardous conditions and live, pressurized or confined space work; or difficulty accepting safety accountability and quality rework; or unwillingness to report and hand over per the system when authorization is exceeded.
Do an entry exercise: Verification suggestion | first independently complete the H1 desktop record check, then check real drawing and instrument learning, activity qualifications and training conditions against the target role; do not pressure test, weld, adjust protective devices or perform hazardous work on your own.
Do not let a single test decide your career
Holland occupational interest model (RIASEC)
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Which Holland interest type is closer to geothermal technicians?
Holland (RIASEC) | for understanding your relative position on Realistic, Conventional and Investigative preferences. The O*NET interest code for this occupation is RCI (Realistic—Conventional—Investigative), corresponding to a willingness to work hands-on on site installing and servicing equipment, piping and tools (Realistic), to execute according to drawings, processes, procedures and records (Conventional), and to study the causes, parameters and mechanisms of faults and to troubleshoot and judge (Investigative); this is consistent with the occupation's activity profile, which is dominated by getting information (86), making decisions and solving problems (86), communicating with supervisors, peers or subordinates (83) and repairing and maintaining mechanical equipment (74). The questionnaire is only for raising questions, not for judging suitability or fitness to work.
- Willing to work hands-on on site according to drawings, process cards and procedures, and to stay rigorous about parameters and records.
- Willing to work under live, pressurized, excavation and confined space conditions in line with safety and permit requirements, and to record and report anomalies truthfully.
Do not use it like this:If you find it hard to work long term outdoors and in hazardous conditions, noise and pollutant environments, or cannot accept the risks of live, pressurized, confined space and work-at-height tasks, a high interest questionnaire score cannot change that real cost; this occupation also requires confirming the institution's electrical safety production, pressure piping, special equipment, occupational health and certification requirements.
Test my Holland occupational interestsFive-factor personality model (Big Five)
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Which Big Five traits are more relevant to this job?
Editorial self-question | can you keep checking equipment readings and records, communicate under authorization when anomalies occur, and accept review? This round has no occupation-specific personality and performance validation, and suitability is not inferred from conscientiousness or emotional stability scores.
- Finishes what is started, and is willing to check item by item whether parameters, pressure tests, calibration and isolation and permit information are consistent.
- Can still hold to process, safety and record standards under the pressure of maintenance windows and outdoor or night work.
Do not use it like this:Do not use a personality assessment saying I am not suited as a reason to give up or stay out of the field; rely instead on internships, shadowing, simulated installation, maintenance and testing tasks, and mentor evaluations and assessment results.
See my Big Five personality traitsMyers-Briggs Type Indicator (MBTI)
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Can MBTI be used to judge whether I am suited to being a geothermal technician?
MBTI | typology is used for self-reflection on communication and work preferences; this occupation requires communicating and coordinating under procedures with crews, operations, maintenance, instrumentation and control, and contractors (face-to-face or in person and team discussions 96% report daily, telephone communication 82% report daily), and preferences do not determine competence.
- Willing to explain parameters, test results, anomalies, handling and permit conditions to crews and to operations and quality roles, and to confirm understanding.
- Under a maintenance window or in a safety dispute, communicate and review per procedure rather than working first and filling in records afterwards.
Do not use it like this:Treat the type only as a reference for communication style; do not use it to infer whether you or others can do on-site installation, maintenance and safety work well.
Understand my MBTI preferencesEnneagram
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Can the Enneagram show whether I am suited to this occupation?
The Enneagram is used for self-questioning. The editorial suggestion is to record how to verify procedures and evidence when parameters, pressure records or isolation questions arise; the relative validity of this observation against type labels was not obtained, so which matters more is not judged.
- When activities exceed the actual authorization or by law require a dedicated body for inspection, dispatch or acceptance, hand over per the system; the precise occupation already includes some design and layout tasks, so these are not all excluded.
- Can handle corrections and challenges from supervisors and from operations, safety and quality roles on the merits.
Do not use it like this:Do not use type labels to explain work errors or safety incidents; go back to whether drawings, processes, isolation, permits and on-site status were in place.
Explore my Enneagram patternIntelligence quotient (IQ) and numerical reasoning
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Can I be a geothermal technician if I am not good at math?
Observable performance this time in reading drawings, checking parameters and units, and verifying anomalies; the relative predictive validity of IQ against these task observations was not obtained, so it is not judged that this occupation relies more on one of them, and on-site ability requires professional training and assessment.
- Can read drawings, process cards, equipment manuals and safety documents and identify contradictions and anomalies.
- Can keep priorities, records and work permits in order while multitasking across several trades at once.
Do not use it like this:A score level cannot show whether someone can learn on-site installation, maintenance and troubleshooting; this should be tested through internships, shadowing, simulated installation and maintenance tasks, and mentor evaluation.
Understand my intelligence and reasoning performanceEmotional intelligence (EI, often called emotional quotient)
Insufficient evidence: no specific validity, hiring threshold or performance prediction basis for this assessment in 49-9099.01 was obtained; the test is only for self-reflection and does not yield qualification or competence conclusions.Does being a geothermal technician require high emotional intelligence?
Editorial observation suggestion | when readings are abnormal, maintenance time is tight and communication is disputed, can the person record the real status and verify it per procedure? There is no evidence that a precise occupation emotional intelligence score predicts safety or performance.
- Can stay calm, put procedures first and keep clear records when parameters exceed limits, pressure tests fail, safety disputes arise or maintenance pressure builds.
- Can accept corrections from supervisors and from operations, safety and quality roles about work, records and handling.
Do not use it like this:After training, actual communication and pressure handling can continue to be observed; no effect of emotional competence training in this occupation was obtained, and improvement from work or practice is not guaranteed.
Understand my emotional intelligenceWhich geothermal technician work direction are you more likely suited to?
Geothermal Technicians | the outputs are installation, inspection, testing, calibration, maintenance and record results: monitoring and adjusting the operation of geothermal plant equipment, identifying and correcting equipment, electrical, instrument or control faults, and installing and testing ground-source heat pumps and loop piping with pressure testing (O*NET/SOC 49-9099.01, Geothermal Technicians)
Better match:Can independently complete on-site installation, maintenance, instrumentation and control upkeep, and testing work within the scope of authorization and certification
Note:First check the target role's actual environment, training and safety responsibility; a single self-question or desktop item cannot rule out an entire occupation.
See related occupations:This occupation (Geothermal Technicians) directionHydroelectric Technicians | the outputs are hydro site operation and maintenance records: monitoring and adjusting turbine-generator units and auxiliary equipment per procedures, and performing maintenance, testing and servicing
Better match:Possesses on-site operation, maintenance and testing ability for hydraulic structures and hydro units
Note:First compare interest in hydro unit tasks against geothermal and heat pump tasks, then check the specific role; do not rule out a direction from a single item.
See related occupations:Hydroelectric Technician directionWind Turbine Service Technicians | the outputs are wind site operation and maintenance records: inspection, maintenance and troubleshooting on turbines, towers and electrical and control systems
Better match:Possesses work-at-height, wind equipment maintenance and electrical troubleshooting ability
Note:First check the target role's work-at-height, site and training conditions; an interest score cannot replace real adaptation and qualifications.
See related occupations:Wind Turbine Service Technician directionGas Plant Operators | the outputs are operating actions and parameter records: operating and monitoring gas processing, compression and transmission equipment per procedures and adjusting conditions and handling alarms
Better match:Possesses the ability to operate continuously per procedures and to monitor panels and conduct inspections in a process industry
Note:First compare preference for process monitoring against installation and maintenance tasks; work content may overlap, so judge from the specific posting.
See related occupations:Gas Plant Operator directionPower Plant Operators | the outputs are operating actions and parameter records: starting, stopping and adjusting units and auxiliaries per operating procedures, monitoring panels and handling alarms, inspecting equipment and recording parameters
Better match:Possesses the ability to operate per procedures and to monitor panels, inspect and record parameters
Note:First compare preference for generation control against maintenance tasks, and check the specific shift pattern and training; no personality exclusion.
See related occupations:Power Plant Operator directionBiomass Plant Technicians | the outputs are biomass site operation and maintenance records: maintaining and repairing fuel handling, boiler, turbine and flue gas treatment equipment and recording defects
Better match:Possesses on-site maintenance and repair ability for boilers, turbines and environmental protection equipment
Note:First compare interest in fuel, combustion and emission equipment against geothermal tasks, then check the real job requirements.
See related occupations:Biomass Plant Technician directionFAQ on occupation fit
What kind of personality is better suited to being a geothermal technician?
What kind of personality is better suited to being a geothermal technician? This occupation values adherence to drawings, processes, safety and permits; sensitivity to parameters, instruments, noise and vibration; stability and hands-on ability under hazardous conditions and maintenance windows; and a sense of responsibility on safety, quality and record issues, rather than a particular personality type. The O*NET interest code is RCI (Realistic—Conventional—Investigative), which can serve as a starting point for exploration.
Are introverts suited to being geothermal technicians?
Introversion does not determine competence. 96% report daily face-to-face contact and 82% report daily telephone contact, which shows the communication demands; this cannot be used to claim a great deal of independent work or to select people by introversion or extraversion.
Can extraverts do geothermal technician work well?
Extraversion cannot replace drawing comprehension, numerical checking or task communication; this round has no evidence that extraversion in this precise occupation brings a performance advantage.
Which MBTI type is best for geothermal technicians?
Which MBTI type is best for this occupation? No type has been proven best. MBTI is not a vocational qualification or ability assessment tool, and occupational fit depends mainly on skills, adherence to process, and safety and certification awareness.
Which Holland interest type is better suited to this occupation?
Which Holland interest type is better suited to this occupation? The O*NET interest code is RCI: Realistic (working hands-on on site installing and servicing equipment, piping and tools), Conventional (executing according to drawings, processes, procedures and records) and Investigative (studying the causes, parameters and mechanisms of faults and troubleshooting and judging); it can be used to explore task preferences, not to predict performance.
Can personality trait scores predict job performance in this occupation?
This round obtained no occupation-specific performance prediction evidence from personality or interest scores for 49-9099.01; observe through real tasks, training and feedback, and do not draw hiring or lifelong fit conclusions from scores.
Can someone who is bad at math be a geothermal technician?
Can someone who is bad at math do this occupation? It requires basic calculation and unit conversion, heat loss and heat gain, flow and pressure accounting, and drawing interpretation; a quantitative foundation can be made up through training, but being wholly uncomfortable with readings, calculations and drawings would be a clear limitation.
Does being a geothermal technician require high emotional intelligence?
Does this occupation require high emotional intelligence? It requires emotional stability, patience, and crew and cross-trade collaboration, but not a particular assessment score. Outdoor and hazardous conditions, maintenance pressure and safety disputes require self-regulation and communicating and reporting per procedure.
Can the Enneagram be used to judge whether I am suited?
Can the Enneagram be used to judge whether I am suited? No. The Enneagram is a self-exploration tool and does not constitute a conclusion about occupational ability or fit; fit should be judged by whether one can complete on-site installation, maintenance and testing work under procedures, safety, permit and certification requirements.
How can I use deliverables to judge which direction suits me?
H1 can deliver a water or heat result table, a pressure drop and permit issue table, a V1 to V2 revision table and a handover summary; it provides only this desktop behavior sample and cannot yield long-term fit or verified on-site competence.
Work pressure, risks and occupational boundaries
What pressures, risks and occupational boundaries come with geothermal technician work?
Editorial risk summary | missing permits, isolation or protection; abnormal installation or pressure records; record falsification; work beyond authority; single points in skills or spare parts; and unclear responsibility for outsourced delivery. The figures 90% hazardous conditions daily and 63% very high responsibility for others' safety are O*NET response categories and cannot prove the frequency of these failures; lawful correction differs from backdating or forgery.
O*NET context: 90% hazardous conditions daily, 63% very high responsibility for others' safety, 71% more than 40 hours in a typical week — all response categories, not accident rates. The editorial risk cases are derived from tasks; the actual boundaries of activity in China are set out in the Work Safety Law, the Special Equipment Safety Law, the Ecological Environment Code and the Occupational Disease Prevention and Control Law.
Work permit, isolation or protection not confirmed
Typical scenarios:Scenario | a maintenance window is approaching, and the parties want to work live or pressurized first to keep operating and to fill in the work permit and isolation records later, while protective equipment is not yet fully issued.
Main roles:The individual together with operations and safety roles; on-site personnel, equipment and the grid
Possible consequences:Work permits, energy isolation and lockout/tagout not confirmed, or live, pressurized, excavation, confined space and work-at-height tasks not performed with the required permits and protection, or tools and instruments not calibrated; may cause personal injury, equipment damage and safety incidents
Reducing risk:Before work, complete the work permit, risk assessment, energy isolation, lockout/tagout and tool inspection and confirm personnel qualifications and protective equipment; live, pressurized, confined space and work-at-height tasks follow procedure and certification requirements, and work must not proceed with unaddressed hazards; if permits or protection are inadequate, stop immediately and report.
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · BLS Occupational Employment and Wage Statistics (OEWS)
Abnormal installation, welding or pressure records not verified
Typical scenarios:Scenario | a loop pressure test shows an unqualified pressure drop, the schedule is tight, and the site is asked to backfill the trench and restore the ground first and fill in the pressure test record later.
Main roles:The individual together with quality and maintenance roles; equipment, the environment and the client
Possible consequences:Failed welding, pressure testing, flushing or commissioning not isolated or addressed, or deviation in piping, fittings, heat pumps or instrument installation, or abnormal parameters, flow or pressure not rechecked; may cause leaks, equipment damage, rework and environmental consequences
Reducing risk:Perform welding, pressure testing, flushing and commissioning per process cards and procedures and record the data; failures must be isolated and rechecked and rectified, and installation deviations must be rechecked against drawings and standards; process and quality records must be traceable and left alongside the work.
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · health
Operations and test records distorted or altered without trace
Typical scenarios:Scenario | at handover, part of the previous shift's installation, calibration and pressure test records is missing and the actual site condition does not match the drawings, and completing them from a template and signing later is suggested.
Main roles:The individual together with quality and records roles; the institution, regulators and the client
Possible consequences:Installation, maintenance, testing, calibration, training and permit records missing or altered without trace, or test and maintenance records inconsistent with the site; may violate electrical safety production, quality and permit requirements and affect equipment safety, acceptance and traceability
Reducing risk:Lawful correction must retain the original value, the actual correction time, the reason, the basis and the review; missing items are truthfully noted as pending verification, and backdating, fabricating test results, selective omission or untraceable overwriting are prohibited.
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · BLS Occupational Employment and Wage Statistics (OEWS)
Working or issuing conclusions beyond activity qualifications or authorization
Typical scenarios:Scenario | when staffing is tight, uncertified personnel are asked to perform pressure piping welding or electrical protective device adjustment, or to state conclusions in the record about equipment safety and grid connection conditions so they can be submitted the same day.
Main roles:The individual together with compliance and certification roles; engineering, inspection and regulatory conclusions
Possible consequences:Working beyond the scope of certification and authorization, or treating on-site results as confirmed conclusions in place of engineering design, statutory inspection of pressure piping and special equipment, or grid connection and acceptance conclusions; may give rise to safety, compliance or legal liability
Reducing risk:Work must be carried out within the scope of certification and authorization, and engineering design or statutory inspection or grid connection and acceptance conclusions are handed to the corresponding role or body; when faced with a request beyond authorization or for a conclusive statement, state the boundary first and hand over per the process.
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · health
Single points in key skills or spare parts causing interruption
Typical scenarios:Scenario | the only technician familiar with a certain heat pump or control system model and welding process goes on vacation, and untrained personnel are asked to take over key installation and commissioning.
Main roles:The individual together with crew and materials roles; work continuity and the maintenance window
Possible consequences:Key skills, experience, spare parts, tools or certified personnel resting on a single point; vacation, resignation, equipment failure, parts shortage or weather interrupting work; may delay maintenance and affect equipment availability and safety redundancy
Reducing risk:Establish backup and handover rules for skills, experience, spare parts, tools, certified personnel and outsourced resources, so key process parameters and work plans can be reproduced with a trace; when staffing, parts or resources are insufficient, report per procedures and adjust priorities rather than working with unaddressed hazards
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · O*NET 49-9099.01 occupation profile and official scope
Unclear responsibility for outsourced delivery, records and acceptance
Typical scenarios:Scenario | after completing installation or maintenance, a subcontractor asks for settlement and site restoration without submitting pressure test, commissioning and calibration records, and the site is asked to sign first and fill them in later.
Main roles:The individual together with contractors and partners; quality, permit and safety responsibility
Possible consequences:Unclear delivery, acceptance, responsibility and cost-change terms for outsourced installation, maintenance, testing or equipment supply, or an unclear technical scope and retrofit scope for the client; may lead to rework, cost disputes and unclear quality and safety responsibility
Reducing risk:Cooperation and outsourcing must define scope, standards, acceptance, certification, safety responsibility and cost-change rules with a trace, and deliverables must be reviewed and accepted; when delivery, acceptance or ownership disputes arise, pause, review and report
Basis:O*NET 49-9099.01 detailed information (tasks and work context) · O*NET 49-9099.01 occupation profile and official scope
Entry, qualifications and career development
How to become a geothermal technician: education, qualifications and career development paths
Editorial preparation path | first choose the geothermal power generation operations and instrumentation maintenance direction or the ground-source heat pump installation and maintenance direction, and check the actual job's education and tool requirements; complete the corresponding training and mentoring, check the qualifications and work approvals involved in the activity, and then expand tasks according to capability and responsibility. In the US, O*NET Job Zone 1-2 with SVP below 6.0 is the general preparation range. The education question asks what education new entrants need; 66% answered a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college with no degree; this is not the education distribution of current workers and does not prove that all roles have the same education or training duration. Actual entry conditions are checked against the target posting and jurisdiction. The O*NET catalogue lists 5 certification names, which serve only as a discovery entry point. IGSHPA was checked on 2026-10-03: the AI, CGD, CGI and CRD legacy courses are being phased out, and AI is arranged case by case only because certain programs require it; the new system is modular by direction such as design, installation, repair and inspection, so renewal of existing certificates and new registration must be checked separately. AEE has stopped accepting new CGD applications, while existing holders still have a renewal path. The NGWA CVCLD is a voluntary closed-loop drilling certification that requires being at least 20 years old, 24 consecutive months of relevant drilling experience, an examination and supporting documentation; it is not a general entry permit for people with no experience, nor does it replace local permits. Historical names in the catalogue must not be written as currently open for application or as required for every geothermal role.
How new graduates or career changers can verify and get started
How do entry-level roles and early tasks for geothermal technicians compare?
| Occupation direction | Starting tasks | Evidence you can prepare | Work samples you can show without experience | How it differs from this occupation |
|---|---|---|---|---|
| Hydroelectric Technicians | Assisting with inspection and maintenance of units and auxiliary equipment | A degree in hydraulic or electromechanical fields and a maintenance internship record | A mock key-points sheet for turbine unit inspection and maintenance | It covers hydraulic structures and hydro units on site, while this occupation covers geothermal plants and ground-source heat pump sites |
| Biomass Plant Technicians | Assisting with fuel, boiler and turbine equipment maintenance | A degree in energy or power fields and a maintenance internship record | A mock key-points sheet for boiler, turbine and flue gas equipment maintenance | It covers biomass fuel, boilers and turbines, while this occupation covers geothermal equipment and loops |
| Gas Plant Operators | Assisting with process equipment inspection and parameter recording | A degree in oil and gas or chemical fields and an operations internship record | A mock key-points sheet for process operations and parameter recording | It covers continuous process operation and interlocking, while this occupation covers on-site installation, maintenance and pressure testing |
| Power Plant Operators | Assisting with panel monitoring, inspection and parameter recording | A degree in electrical or automation fields and an operations internship record | A mock key-points sheet for panel monitoring, inspection and parameter recording | Its outputs are operating per procedures and panel monitoring, while this occupation's outputs are installation, maintenance and testing |
| Wind Turbine Service Technicians | Assisting with turbine and electrical inspection and maintenance | A degree in electromechanical or electrical fields and a work-at-height internship record | A mock key-points sheet for turbine inspection and electrical troubleshooting | It covers wind equipment at height and remote sites, while this occupation covers geothermal plants and ground-source heat pump sites |
What do employers usually look for in hiring?
In the US, JobZone1-2/SVP below 6 is the general preparation range; education responses for new hires are 66% high school, 20% postsecondary certificate and 12% some college with no degree, which are not the distribution of existing qualifications or a uniform number of years.
Whether one can work independently or issue test records does not depend on the education itself but on whether one takes on the corresponding duties within the institution's and project's authorization, procedures and certification scope.
Education, method training, actual experience, qualifications and authorization are checked separately; no estimate of their relative contribution to independent installation or maintenance ability was obtained, so education is not said to affect only entry or to be the single deciding factor.
Training and qualifications are checked against the actual activity: catalogue equipment, specified special operations, exposure to occupational disease hazards, and real plant permit rules are determined separately; no uniform certificate, medical examination and procedure is inferred for all geothermal technicians.
Matters involving engineering design, statutory inspection of pressure piping and special equipment, and grid connection, permit and acceptance conclusions must be performed by the role or body holding the corresponding qualifications.
The retention, provision and disclosure of controlled operations and maintenance data, or data involving trade secrets or personal information, must be managed under confidentiality and minimum-necessary requirements; controlled materials must not be sent to unauthorized environments.
The O*NET interest code is RCI (Realistic—Conventional—Investigative), leaning toward working hands-on on site installing and servicing equipment, piping and tools, executing according to drawings, processes, procedures and records, and studying the causes, parameters and mechanisms of faults and troubleshooting and judging; the most important work activities are getting information (86), making decisions and solving problems (86), communicating with supervisors, peers or subordinates (83), controlling machines and processes (82) and operating vehicles, mechanized devices or equipment (81).
The work context (percentage response basis) shows exposure to hazardous conditions 90% daily, wearing common protective or safety equipment 84% daily, being outdoors exposed to all weather 83% daily, exposure to contaminants 74% daily, responsibility for the health and safety of others 63% very high, and work hours 71% more than 40 hours per week.
The interest and work context data are only for self-questioning and do not constitute hiring or performance conclusions.
The precise tasks involve instruments, electrical and mechanical work and heat pump loops; the software detail page lists 9 categories and the shares for the 6 items on the hot technologies page are NA. The list does not imply that every role uses all tools or the actual usage frequency.
Judgments about equipment, safety and quality depend on professional knowledge, experience and on-site confirmation, while digital tools are used for drawings, data recording, repair work orders and spare-part and ledger management.
Permission for on-site work, maintenance, acceptance and disclosure is governed by institutional authorization and certification, safety and permit requirements; tools and software do not produce authorization.
Entry exercise: one complete installation, maintenance and recording task (fictional material)
M1 | H1 mock pure water record 14:00—14:10: constant flow 3.6 m³/h, inlet water 18°C, outlet water 22°C. Given density 1 kg/L, specific heat 4.18 kJ/(kg·K), 1 m³ = 1000 L, 1 h = 60 min and 1 kW = 1 kJ/s. Calculated only under a constant water flow model; no real equipment is simulated.
M2 | existing paper P1 record: start pressure 0.45 MPa, end pressure 0.42 MPa, teaching judgment condition is pressure drop ≤0.02 MPa; water temperature 22 to 24°C, instrument calibration status blank. The conditions apply only to this item and are not a field standard; no leak point data.
M3 | W2 permit signature and isolation confirmation are both blank; A's training has expired, B's training is valid, but neither A nor B has W2 work approval. Q is responsible for checking the paper conditions and S is responsible only for document review, with no work approval authority.
M4 | the V1 draft writes the M1 volume as 6 m³ and the heat as 100320 kJ, and writes P1 as 'qualified, leak point determined'; the original V1 value must be retained, recording the V2 correction, the actual correction time, the reason and the pending-review status for S.
M5 | within the item the current time is 14:22 and the file deadline is 15:00; at 14:10 Q was asked to check the missing calibration attachment and has not replied. Only the existing time records are provided and Q or S approval is not simulated; ask for the remaining and elapsed minutes and the deliverable boundary.
M6 | mock budget: 1 person × 2 hours × 210 CNY per person-hour, parts 360 CNY; find the subtotal of these listed items, excluding taxes, shipping and other costs. Only pen and paper or a calculator are needed; no measuring tools, real drawings or an extra mentor.
Complete three tables in 90 minutes: the result table lists M1 volume, mass, temperature difference, heat, average thermal power, M2 pressure drop, the M5 two time differences, the M6 subtotal and units and assumptions; the issue table lists evidence, information to be verified, responsible person and status; the V1 to V2 table retains the original values, the correction reason and the actual correction time.
Write a handover of ≤200 characters, distinguishing calculation results that hold, P1 pending verification, W2 not approved, Q not having replied and S pending document review; it must not state on-site qualification, a determined leak point, actual installation or authorization obtained.
Answer independently first, then check the reference solution below; use 15 minutes to read the material, 30 minutes to calculate, 25 minutes to check the issues and versions, and 20 minutes for the handover review. Readers without experience do not need to take additional samples, contact a mentor or operate equipment.
Reference 1 | M1 volume 3.6×10/60 = 0.6 m³ = 600 L, mass 600 kg, temperature difference 4 K; Q = 600×4.18×4 = 10032 kJ, averaging 16.72 kW over 600 seconds. The 6 m³ and 100320 kJ of V1 are both 10 times too large. Water-side given model only, not a whole-building heating or cooling load or COP (no electrical power). M6 labor 420 CNY + parts 360 CNY = 780 CNY, a subtotal of the listed items only.
Reference 2 | P1 pressure drop 0.45 − 0.42 = 0.03 MPa, greater than the in-item condition of 0.02, so it cannot be written as qualified within the item; the temperature change, calibration and method await Q's check and are insufficient to determine a leak point or formal site acceptance. The two W2 items are blank and no one is approved, so neither A nor B can start work; B can organize the documents pending verification. From 14:22 to 15:00 there are 38 minutes left, and the Q request has been waiting 12 minutes; no reply does not equal approval, and an internal draft pending verification may be submitted.
Reference 3 | V2 keeps the original V1 record, noting the volume 0.6 (m³), the heat 10032 (kJ) and the unit conversion error; change the P1 conclusion to go beyond the teaching conditions with the site result awaiting Q's check, with W2 not approved and Q not having replied or S pending review. Corrections record the actual time they were made and are not backdated; S's document review does not grant work permission. Handover example: the water side calculates 10032 (kJ)/16.72 (kW) and the cost subtotal is 780 CNY; P1 pressure drop 0.03 (MPa), with calibration and method missing, so a leak point cannot be judged; W2 has no approval, so A and B do not start work; Q has waited 12 minutes and 38 minutes remain to the deadline. V2 keeps the original draft, pending Q's check and S's document review, and is not treated as formal acceptance.
Review | check units, calculations, known, inferred and pending-verification items, and signature status item by item; record the real calculation errors and corrections. Any tool draft must be checked by the individual, and Q or S replies, real site verification or mentor evaluations must not be fabricated.
Pure fictional paper material; do not pressure test, weld, operate valves, energize, change protection settings, excavate or enter the site. Real activities should be checked separately against the actual rules, qualifications and approvals.
The work sample only observes this desktop calculation and evidence and handover behavior; it does not prove real equipment qualification, work permission, on-site competence, long-term fit or income.
What reviewable work material can be prepared at entry level?
Work sample one | H1 result table: 0.6 (m³)/600 (kg)/4 (K)/10032 (kJ)/16.72 (kW), 0.03 (MPa), 38 (minutes)/12 (minutes), 780 CNY, keeping the formulas, units and assumptions.
Note the pure water constant flow model; it is not COP, a whole-building load or engineering acceptance.
Record the parts completed independently and the real error corrections, and do not treat tool calculations as site observations.
Work sample two | issues pending verification table: P1 temperature and calibration or method gaps, W2 permit and isolation blank, Q not having replied, S conducting document review only.
State the evidence, the person responsible for verification and the unapproved status; with no reply it remains pending verification.
Can independently check against the reference solution; external feedback is optional and no evaluation is fabricated if none was obtained.
Work sample three | V1 to V2 revision and a 200-character handover: keep the original values, the correction reason, the actual correction time, and pending Q check or S review.
Use only the synthetic records in this item, distinguishing calculations that hold from site items pending verification, without fabricating real unit or personal data.
The handover must include the pressure drop 0.03 MPa, W2 not approved, the 38-minute deadline margin and the 780 CNY scope of listed items.
Work sample four | the individual's review note: four types of check covering units, permissions, versions and time limits.
If tools are used, keep the original draft and the individual's revisions; note the checking method and that no site confirmation was made.
List items still wrong or pending verification and improvements for the next desktop exercise; do not write about certificates obtained or independent operating ability.
What may be assessed in interviews and probation, and which conclusions cannot be inferred?
| Stage | Points that may be checked | Observable evidence | Boundary notes |
|---|---|---|---|
| Resume and initial screening | A degree and training in electromechanical, electrical, HVAC or welding related fields, on-site installation, maintenance or instrumentation experience, and safety training | Education, training, maintenance and certification records | Self-assessment cannot replace education, certification or institutional verification |
| Interview | Understanding of work permits, energy isolation, pressure testing and commissioning, and the boundaries of safety and permits | Judgment on handling anomalies, exceeding authority and safety boundaries in on-site question and answer | Scenario answers cannot replace electrical safety, pressure piping and special equipment training and certification |
| Written or practical test | Parameter judgment, instrument use, and welding or pressure testing or commissioning and record wording | Installation arrangement, testing, maintenance records and rectification design results | A hands-on test does not equal the ability to work independently under certification or to issue inspection conclusions independently |
| Onboarding and probation | Complying with process, safety, quality, permit and record management systems | Work permit, pressure test, calibration, maintenance, training, permit and reporting form records | Duties and authorization are governed by the institution's job assignment and assessment |
Seven-day experience: complete one installation, maintenance and permit loop with fictional material
- 01
Read the six sets of H1 material, labeling the M1 water-side model, the M2 teaching conditions, the M3 permissions and the M5 in-item time.
Distinguish the editorial design of this item from the formal O*NET occupation tasks; do not collect real data.
- 02
Independently calculate the M1 volume, mass, temperature difference, heat and average power, and record the formulas and units.
Answer first, then check 0.6 m³, 10032 kJ and 16.72 kW against the reference; COP cannot be calculated from this.
- 03
Check the M2 pressure drop of 0.03 MPa and the calibration gap, and list the method and temperature information pending Q's check.
Do not infer a leak point, simulate a real pressure test, or treat teaching conditions as a site standard.
- 04
Check the M3 permits: A's training has expired, B's is valid but has no W2 approval, and neither may start work.
With M5, 38 minutes remain and Q12 minutes have already been waited; no reply still means pending verification, so arrange an internal draft.
- 05
Following M4, keep V1 and produce V2, marking the actual correction time and reason and S's pending review.
Calculate M6 labor 420 + parts 360 = 780 CNY, list the excluded costs, and do not invent signatures.
- 06
Complete the three tables and a handover of ≤200 characters, then independently check against the reference.
Attach real feedback if available; if there is no external feedback, note that truthfully — it does not prevent completion.
- 07
Summarize this desktop performance: whether you want to practice more, shore up unit and evidence habits first, or explore other tasks first.
The next step can check the target role's training; this result does not prove hazardous work ability or long-term fit.
How to judge at the end of the seven days whether to continue
- Continue exploring: willing to do more unit and record checking of the H1 type, and able to point out the different conclusion boundaries of 0.6 (m³) and 0.03 (MPa).
- Continue exploring: able to keep the original V1 value and correct it truthfully, without writing pending verification as approval because of the 38-minute deadline.
- Next step: choose a real geothermal power generation or ground-source heat pump direction and check the corresponding training and activity qualifications; one item does not prove the ability to work independently on site.
- Pause this type of exercise first: this time the units or evidence status are still confused, so shore up the basics and redo it; do not rule out the whole occupation from one failure.
- Needs more practice: writing B's valid training as W2 approval, or writing no reply or a missing attachment as qualified; keep a record of the real errors.
- Comparison direction: if interested in continuous monitoring and parameter recording, check the real tasks of power plant or gas plant operators separately, with no promise of direct transfer.
- Comparison direction: if interested in hydro, biomass, wind power or electrical maintenance, check the equipment, training and qualifications separately, and do not infer fit from a H1 score.
Education, training and qualifications: which are the real thresholds for this occupation?
| Qualification or preparation item | Who it applies to | Role for this occupation | Whether it is universally required | Conditions for obtaining | Approximate investment | Limitation notes |
|---|---|---|---|---|---|---|
| Education and vocational training | Applicants for the target role | Supplementing electromechanical, electrical or HVAC knowledge | Check against the posting; the education questionnaire is not a uniform education threshold | U.S. O*NET Job Zone 1-2 and SVP below 6.0 are a general preparation range. The education question asks 'what education do new hires need', and 66% answer a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college, no degree; this is not the education distribution of existing workers and does not prove one uniform education or training duration for all positions. Actual entry conditions are checked against the target posting and jurisdiction. | This page does not estimate a general duration | Education cannot replace actual training and work approval |
| Instrument, electrical, mechanical or heat pump loop skills | People in the corresponding direction | Completing tasks in that direction | Checked by task; not everyone is required to cover every trade | Courses, internships and job assessments follow the real arrangement | Checked by direction and foundation | H1 is only a desktop calculation record sample |
| Safety training and statutory qualifications required by the activity | Those actually involved in the relevant work | Meeting the training or qualification requirements | Determined by the activity and the equipment catalogue | For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval. | Checked against statutory conditions and actual training | There is no uniform special equipment certificate or uniform medical examination for the whole occupation |
| Ground-source heat pump industry certification and course certificates | Corresponding design, installation, maintenance or drilling direction | Relevant programs can serve as training or professional evidence | Voluntary or program requirements are kept separate from statutory permits | The O*NET catalog lists 5 certification names, which serve only as a discovery entry. On 2026-10-03 IGSHPA was checked: the old AI, CGD, CGI, and CRD courses are being phased out, and AI is arranged case by case only because of related program requirements; the new system is modular by design, installation, service, and inspection directions, and renewals of existing certificates and new registrations are checked separately. AEE CGD has stopped accepting new applications, while existing holders still have a renewal path. NGWA CVCLD is a voluntary closed-loop drilling certification requiring being at least 20 years old, 24 months of continuous related drilling experience, an examination, and documentation, and is not a general zero-experience entry certificate nor a substitute for local licensing. Historical names in the catalog must not be written across the board as currently registrable or required for all geothermal positions. | Checked against the current issuing body and course | Old names do not prove that application is possible today; certification does not replace permits |
| In-house job training and authorization | Target employer role | Clearly able to take on tasks independently | According to the job arrangement | Check the real assessments, experience and authorization records | Checked with the actual employer | Internal authorization cannot replace statutory qualifications |
| Preparation for document, data and permit management | Those handling the relevant materials | Check real records, lawful correction and disclosure | Checked against the actual materials and duties | Learn the systems, templates and information classification used | Checked by task | Ordinary equipment parameters are not automatically personal information or trade secrets |
Qualification and authorization boundary note
Recruitment sample note
On-site installation and maintenance direction
Installation and maintenance assistance role
Typical duties:Under mentoring, take on tool preparation, handling, cleaning, disassembly assistance, spare-part registration and record assistance; do not independently take on welding, pressure testing or live and pressurized work.
Promotion evidence:Tool and disassembly assistance, spare parts, maintenance records and mentor evaluation; can restate the process and safety key points.
Qualification boundaries:Training records in electromechanical, mechanical or welding related fields; electrical safety and occupational health training.
Next steps:Familiar with the key points of drawings, process cards, tool use, pressure testing, flushing and record standards.
Independent installation and maintenance role
Typical duties:Independently complete installation, inspection, pressure and flow testing, flushing, commissioning, preventive maintenance and repair, and review and record per standards.
Promotion evidence:Installation, pressure testing, commissioning, maintenance and fault-handling records and review opinions.
Qualification boundaries:Institutional job authorization and the corresponding certification; practical on-site maintenance experience.
Next steps:Accumulate experience across different equipment, piping, heat pumps and operating conditions, and practice welding quality, pressure testing, commissioning and troubleshooting methods.
Crew and process mentoring role
Typical duties:Take on work organization, process implementation, safety, quality, mentoring, multi-trade coordination and management of tools, spare parts and work permits.
Promotion evidence:Crew organization, safety, quality and mentoring records.
Qualification boundaries:Corresponding job authorization; crew organization and mentoring records.
Next steps:Learn work safety management, work permits, energy isolation, emergency response, multi-trade coordination and maintenance window scheduling methods.
Maintenance and technical coordination role
Typical duties:Coordinate maintenance and installation processes, quality, safety, permits, outsourcing and training, handle complex and disputed matters and guide newcomers.
Promotion evidence:Coordinating conclusions; process, safety, permit and training documents.
Qualification boundaries:Corresponding management appointment or institutional authorization.
Next steps:Improve maintenance and installation processes and the safety, permit, training and outsourcing management mechanisms.
Instrumentation, control and electrical direction
Instrumentation and control assistance role
Typical duties:Under mentoring, take on instrument cleaning, wiring assistance, calibration records, spare-part registration and document organization; do not independently judge control logic or switch protective devices in or out.
Promotion evidence:Wiring and calibration assistance, spare parts, records and review opinions.
Qualification boundaries:Training records in electrical or automation related fields; electrical safety and occupational health training.
Next steps:Familiar with the key points of control loops, protection, transmitters, ranges, calibration and record standards.
Independent instrumentation and control role
Typical duties:Independently complete maintenance, calibration and troubleshooting of instruments, control and electronic devices and maintenance of electrical protection equipment, and review and record per standards.
Promotion evidence:Calibration, loop testing and fault-handling records and review opinions.
Qualification boundaries:Institutional job authorization and the corresponding certification; practical instrumentation and control experience.
Next steps:Accumulate experience across different control systems, operating conditions and failure modes, and practice calibration, switching requests and loop testing methods.
Control methods and mentoring role
Typical duties:Take on control methods, the basis for settings, calibration quality, mentoring of personnel, method improvement and technical review.
Promotion evidence:Technical review, quality, mentoring and technical improvement records.
Qualification boundaries:Corresponding job authorization; technical review and mentoring records.
Next steps:Learn control and protection setting management, instrument reliability methods and system analysis methods.
Instrumentation and control coordination role
Typical duties:Coordinate instrumentation and control methods, quality, settings, spare parts, outsourced technical services and countersignature, handle complex and disputed matters and guide newcomers.
Promotion evidence:Coordinating conclusions; instrumentation and control, spare parts and training documents.
Qualification boundaries:Corresponding management appointment or institutional authorization.
Next steps:Improve the instrumentation and control system and the spare parts, outsourcing and training mechanisms.
Quality, records and safety direction
Quality and records assistance role
Typical duties:Under mentoring, take on organizing testing and maintenance records, ledger registration, document archiving and training record assistance; do not independently judge quality conclusions or submit externally.
Promotion evidence:Organization, archiving, supporting records and review opinions.
Qualification boundaries:Training records in electromechanical, quality or safety related fields; quality, confidentiality and data security training.
Next steps:Familiar with the key points of process, quality, permits, archiving and disclosure standards.
Independent quality and records role
Typical duties:Independently compile testing and maintenance records, consolidate quality data and manage permit and training records, and mark the scope and limitations per standards.
Promotion evidence:Quality, records, nonconformity handling and disclosure records and review opinions.
Qualification boundaries:Institutional job authorization; practical quality and records experience.
Next steps:Accumulate experience across different processes, equipment and project phases, and practice handling of nonconformities, traceability and disclosure methods.
Quality, safety and mentoring role
Typical duties:Take on quality and safety review, training and records, archiving management, mentoring, implementation of permit conditions and outsourced safety management.
Promotion evidence:Review, quality, safety, mentoring and training records.
Qualification boundaries:Corresponding job authorization; review and mentoring records.
Next steps:Learn quality management systems, safety management systems, emergency response, outsourcing and training standard methods.
Quality and safety coordination role
Typical duties:Coordinate quality, safety, permits, records, outsourcing, training and countersignature, handle complex and disputed matters and guide newcomers.
Promotion evidence:Coordinating conclusions; quality, safety, permit and training documents.
Qualification boundaries:Corresponding management appointment or institutional authorization.
Next steps:Improve quality, safety, permit, records, training and outsourcing management mechanisms.
Capability ladder: what evidence counts for promotion?
- 01
Internship and work assistance role
Learn under mentoring the use and handling and cleaning of tools and instruments, and assistance with spare parts and document organization; do not independently take on hazardous or certified work.
- 02
Independent field work role
Can independently complete installation, inspection, testing, calibration, maintenance and recording within the scope of authorization, procedures and certification, and report and recheck per procedures when parameters exceed limits, a pressure test fails or authority is exceeded.
- 03
Skilled, crew and quality role
Can take on work organization, process, quality, safety, mentoring, multi-trade coordination and management of equipment, spare parts and tools.
- 04
Technical and crew management role
Can take on work review, quality, safety, permits, training, statistics, handling of anomalies, countersignature, implementation of technical standards and project coordination.
Career prospects and moving to related occupations
What are the prospects for geothermal technicians, and which related occupations can one move to?
Insufficient evidence: no wages or employment for Geothermal Technicians themselves, no industry or regional percentiles and no causal decomposition of wage differences were obtained; the parent occupation figures and the China gap are as follows. US wages are the 2025 parent occupation 49-9099.00 and do not represent Geothermal Technicians themselves; BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished. Mainland China: insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Three kinds of data, three different measures
O*NET: 2025 parent occupation 49-9099.00 national wages
2025United States · SOC 49-9099.00 (OEWS 2025, presented via O*NET on the 49-9099.01 page)
Median annual wage 49,230 USD / median hourly wage 23.67 USD; 10th percentile 36,080, 25th percentile 42,170, 75th percentile 61,900 and 90th percentile 77,040 (USD per year)
Wages (median and percentiles, parent occupation 49-9099.00 measure as presented via O*NET)
The median is the midpoint of the parent occupation wage distribution and is not the starting pay of a geothermal technician; no independent estimate of industry or regional percentiles or of the causes of differences in the precise occupation was obtained, so wage changes cannot be attributed to certification, education or scope of responsibility.
Cannot show:OEWS excludes benefits and non-production bonuses and includes production bonuses; it is the parent occupation 49-9099.00 measure and is not called 49-9099.01's own value; the figures come from 2025 data and later updates should follow the then-current query.
BLS: parent occupation 49-9099 employment projections 2025—2035
2025—2035United States · SOC49-9099 national employment matrix (BLS direct 2025—2035)
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities. O*NET has presented 2025 employment and the 2025—2035 trend this round, consistent with the BLS current-period figures on this page, yet the parent occupation and the precise scope must still be distinguished.
Employment scale, growth and average annual openings (BLS direct 2025—2035 parent occupation 49-9099)
The parent occupation projections do not support a causal decomposition of geothermal capacity, skills supply or AI effects on employment.
Cannot show:The BLS employment projections use the national employment matrix measure, which includes self-employment and differs from the OEWS employer wage scope. Openings are an annual average over the period and include growth and replacement, not net new jobs or actual hires.
National Bureau of Statistics: 2025 average wages of urban units
2025Mainland China · National Bureau of Statistics average wages of urban unit employees (industry category measure) and bounded search
Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Occupational wages and employment (statistical measures and gaps)
This round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
Cannot show:The legal environment, management systems and statistical measures differ, so no splicing or conversion is made; the China section of this page only registers the statistical measures and the visible gaps.
Where can existing capabilities transfer?
These are capability adjacency relationships and do not mean automatic promotion or that no further training is needed.
Geothermal Production Managers
Editorial judgment: capabilities to addTransferable:On-site equipment, maintenance, safety and procedure experience
To be built up:Capabilities to add include operational command, personnel supervision, permits, grid connection and budget management; transfer note: moderate, moving from a field technical role to an operations and technical management role and taking on crew and compliance responsibility. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsHydroelectric Technicians
Editorial judgment: capabilities to addTransferable:Unit maintenance, instrumentation, electrical and safety experience
To be built up:Capabilities to add include on-site operation, maintenance and testing of hydraulic structures and hydro units; transfer note: relatively close, moving from a geothermal site to a hydro site and needing to build up knowledge of hydraulic structures and hydro units. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsBiomass Plant Technicians
Editorial judgment: capabilities to addTransferable:Power plant maintenance, instrumentation, electrical and safety experience
To be built up:Capabilities to add include maintenance of biomass fuel, boiler, turbine and flue gas equipment; transfer note: relatively close, moving from a geothermal site to a biomass site and needing to build up knowledge of fuel, combustion and emissions. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsGas Plant Operators
Editorial judgment: capabilities to addTransferable:Parameters, inspection, safety and record experience
To be built up:Capabilities to add include continuous operation, panel monitoring and interlock handling under procedures in a process industry; transfer note: moderate, moving from on-site maintenance to a process operation and panel monitoring role. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsPower Plant Operators
Editorial judgment: capabilities to addTransferable:Centralized control, protection, instrumentation and operating procedure experience
To be built up:Capabilities to add include operating to procedures and panel monitoring, inspection and parameter recording; transfer note: relatively close, moving from on-site maintenance to a role operating to procedures with panel monitoring. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsWind Turbine Service Technicians
Editorial judgment: capabilities to addTransferable:Electrical, mechanical and work-at-height experience
To be built up:Capabilities to add include work at height and wind equipment, electrical and control system maintenance; transfer note: moderate, moving from a geothermal site to a wind site and needing to obtain work-at-height and wind qualifications. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsElectrical and Electronics Repairers of Powerhouse, Substation and Relay equipment
Editorial judgment: capabilities to addTransferable:Electrical maintenance, instrumentation and safety experience
To be built up:Capabilities to add include maintenance, testing and relay protection of high-voltage electrical equipment; transfer note: moderate, moving from a geothermal site to high-voltage electrical maintenance and needing to build up electrical testing and certification. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsStationary Engineers and Boiler Operators
Editorial judgment: capabilities to addTransferable:Equipment maintenance, pressure and safety experience
To be built up:Capabilities to add include operation and inspection of boilers, pressure vessels and stationary equipment; transfer note: moderate, moving from a geothermal site to stationary equipment and boiler operation and needing to build up boiler certification. This page does not quantify the transfer distance or probability of success, and the target role's qualifications, authorization and training are checked separately.
View occupation detailsFAQ and sources
What does this occupation actually do?
The geothermal technicians on this page are the precise occupation O*NET 49-9099.01 (Geothermal Technicians): they perform technical work related to geothermal power generation and geothermal heat pumps at geothermal power plants or single-family and commercial installations, monitor and control the operation of geothermal power facilities and maintain and repair them as needed, and install, test and maintain residential and commercial ground-source heat pumps. Core tasks include monitoring and adjusting the operation of geothermal plant equipment or systems (importance 83), writing and maintaining work logs and reports (83), identifying and correcting equipment, electrical, instrument or control faults (81), collecting and recording plant or wellfield operating data (81), and performing pre- and post-installation pressure, flow and related tests on geothermal loop piping (69), plus supplementary tasks such as adjusting the generating system to meet load and distribution needs (88), maintaining electrical switchgear and process control, transmitters and instruments (79), calculating residential heat loss and heat gain (79), maintaining and calibrating or repairing instruments and control and electronic devices (79), welding high-density polyethylene piping (66), and installing and maintaining or repairing ground-source or water-source coupled heat pumps (66). Common job titles include Geothermal Service Technician, I and C Technician, Operations and Maintenance Technician, Plant Mechanic and Plant Technician; on the 49-9099.01 page O*NET shows that the occupation's main industries in the US include administrative and support services and manufacturing (the industry data on that page come from the parent occupation 49-9099.00). The above uses the US occupation classification measure, and wages and employment use the parent occupation 49-9099.00 measure as presented via O*NET.
How does it differ from adjacent roles?
The core difference lies in the object, the outputs and the authorization level: this occupation takes operating geothermal plant equipment and instrumentation and control and electrical systems, ground-source heat pumps, loop piping and on-site work as its object, its outputs are installation, inspection, testing, calibration, maintenance and record results, and independent tasks require separate verification of training, actual qualifications and authorization; Geothermal Production Managers (11-3051.02) take the organization and direction of operations and maintenance, permits, grid connection and personnel safety as their object and carry crew and compliance responsibility; Hydroelectric Technicians (51-8013.04) and Biomass Plant Technicians (51-8013.03) take hydraulic structures and units or biomass fuel, boilers and turbines respectively as their object; Gas Plant Operators (51-8092.00) and Power Plant Operators (51-8013.00) take operating to procedures and panel monitoring as their object; Power Distributors and Dispatchers (51-8012.00) take grid dispatch and distribution as their object; Electrical and Electronics Repairers of Powerhouse, Substation and Relay equipment (49-2095.00) take maintenance and testing of high-voltage electrical equipment as their object; Solar Thermal Installers and Technicians (47-2152.04) and Wind Turbine Service Technicians (49-9081.00) take solar thermal and wind sites respectively as their object; Stationary Engineers and Boiler Operators (51-8021.00) take boiler and stationary equipment operation and maintenance as their object. The object, process and authorization level all differ, and the authority to sign engineering design or statutory inspection of pressure piping and special equipment or grid connection and acceptance conclusions cannot be carried across roles.
What are the US wages and employment situation?
US 2025 parent occupation 49-9099.00 quintile annual wages are 36,080/42,170/49,230/61,900/77,040 USD, corresponding to hourly wages of 17.35/20.28/23.67/29.76/37.04 USD; none of these are Geothermal Technicians themselves. BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities; the OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels.
Is there corresponding wage data for mainland China?
Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted. For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval.
What are the working environment and work intensity like?
O*NET 49-9099.01 work context (percentage response basis) shows: face-to-face or in-person and team discussions 96% daily; telephone communication 82% daily; e-mail 61% daily; wearing common protective or safety equipment 84% daily; exposure to hazardous conditions 90% daily; working in enclosed vehicles or operating enclosed equipment 78% daily; being outdoors exposed to all weather 83% daily; exposure to contaminants 74% daily; responsibility for the health and safety of others 63% very high; and work hours 71% more than 40 hours per week. The most important work activities are getting information (86), making decisions and solving problems (86), communicating with supervisors, peers or subordinates (83), controlling machines and processes (82), operating vehicles, mechanized devices or equipment (81) and repairing and maintaining mechanical equipment (74). The work is characterised by hands-on on-site work, inspection, maintenance and multi-trade coordination, and may involve shift work, maintenance outages, outdoor work, confined spaces and work at height.
Will AI affect this occupation?
Editorial trial suggestion: log consolidation, manual retrieval and work order drafts can be tested, comparing errors and time taken; this round obtained no precise AI exposure, adoption, substitution or wage causality data for 49-9099.01. The O*NET detail page lists 9 software categories, and the 2025 job-posting mention shares for the 6 items on the hot technologies page are all NA, which cannot be treated as actual usage rates or generative AI adoption. Control software such as PLCs also does not equal generative AI. On-site status, record authenticity and activity approval must still be verified by people according to training, actual qualifications and the system.
What education and training are needed?
In the US, O*NET Job Zone 1-2 with SVP below 6.0 is the general preparation range. The education question asks what education new entrants need; 66% answered a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college with no degree; this is not the education distribution of current workers and does not prove that all roles have the same education or training duration. Actual entry conditions are checked against the target posting and jurisdiction. For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval.
Are certificates or qualifications required?
O*NET's catalogue lists 5 certification names, which serve only as a discovery entry point. IGSHPA was checked on 2026-10-03: the AI, CGD, CGI and CRD legacy courses are being phased out, and AI is arranged case by case only because certain programs require it; the new system is modular by direction such as design, installation, repair and inspection, so renewal of existing certificates and new registration must be checked separately. AEE has stopped accepting new CGD applications, while existing holders still have a renewal path. The NGWA CVCLD is a voluntary closed-loop drilling certification that requires being at least 20 years old, 24 consecutive months of relevant drilling experience, an examination and supporting documentation; it is not a general entry permit for people with no experience, nor does it replace local permits. Historical names in the catalogue must not be written as currently open for application or as required for every geothermal role. For mainland China, verify against the actual activity: Article 28 of the Work Safety Law covers training and Article 30 provides for special operation qualifications; Article 2 of the Special Equipment Safety Law covers the catalogue and Article 14 covers the qualifications of relevant personnel, Articles 39—42 cover maintenance, inspection and handling of abnormal conditions, and Articles 50—51 cover the qualifications of statutory inspection bodies and personnel, so ordinary heat pumps or piping cannot be treated as fully listed in the catalogue on the strength of their name alone. Articles 34—35 of the Occupational Disease Prevention and Control Law cover training and health examinations for workers exposed to occupational disease hazards, not a uniform examination for all technicians. The Ecological Environment Code takes effect on 2026-08-15 and the old Environmental Protection Law is repealed at the same time; Article 80 covers monitoring authenticity and Articles 150—151 cover emissions and permits according to the actual scope, and the same permit is not inferred for every project from the occupation name. For information involving identifiable individuals, check the lawful basis, necessity and retention period under Articles 4/6/13/19 of the Personal Information Protection Law; ordinary equipment parameters and locations do not automatically constitute personal information. On-site isolation, excavation, confined space and switching protective devices in or out are verified under the applicable provisions and the real plant rules, and certificates do not replace post or work approval.
What are the main risks of this occupation?
Editorial risk summary: missing permits, isolation or protection; abnormal installation or pressure records; untraceable tampering; work beyond actual authority; single points in key skills or spare parts; and unclear outsourcing responsibility. This is not accident frequency statistics; lawful correction must retain the original value, the actual correction time, the reason and the review. Verify against the applicable process, the catalogue equipment or special operation rules and the real system; an abnormal state must not be treated as approved on the basis of a draft.
What are the prospects, and which directions can one move to?
BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities; the Adjacent tasks can be compared, but equipment knowledge, training, qualifications and actual openings must be checked separately, and this is not an automatic promotion or transfer path.
Sources
The author checked the precise occupation's tasks, work context, new-entrant education, hot technologies NA, parent occupation wages and the BLS direct projections this round; also checked the IGSHPA transition courses, the AEE halt on new applications, the NGWA conditions and the body of the DGDC historical recruitment notice. Legal sources are explained according to the actual activity in China; the H1 input and solution are the editorial design of this page.
On 2026-10-03 this round read the O*NET precise page (updated 2025), the 2025 parent occupation wages, the BLS direct 2025—2035 projections and the current state of the certifying bodies. The Chinese legal sources, NBS, ILO and NIST were reviewed for applicability among the materials checked in this batch, and it is not claimed that each was reopened for this occupation.
Facts are separately sourced to the precise tasks, parent occupation wages, BLS direct projections, 2024 parent occupation industries, NBS aggregated wages and the legal sources for the actual activity. The legacy MOHRSS link is only a lead to be checked and cannot support a claim that no national statistics exist; the historical recruitment notice was checked for its body only, and attachment conditions were not read.
49-9099.01 exact occupationO*NET OnLine / National Center for O*NET Development|United States|O*NET updated 2025; precise page read on 2026-10-03|official occupation details
View original material:49-9099.01 exact occupation- For defining the tasks, work context and work activities of 49-9099.01 (monitoring and adjusting the operation of geothermal plant equipment or systems 83, writing and maintaining work logs and reports 83, identifying and correcting equipment, electrical, instrument or control faults 81, collecting and recording plant or wellfield operating data 81, performing pre- and post-installation pressure, flow and related tests on geothermal loop piping 69; getting information 86, making decisions and solving problems 86, communicating 83, controlling machines and processes 82, operating vehicles, mechanized devices or equipment 81).
- For checking the wording of the tasks, work context and work activities on this page.
Usage limits:An occupation-level description that does not cover mainland China's electricity safety production, pressure piping, special equipment, environmental protection and occupational health management systems.
49-9099.01 exact occupationO*NET OnLine / National Center for O*NET Development|United States|O*NET updated 2025; precise page read on 2026-10-03|official occupation profile
View original material:49-9099.01 exact occupation- The US 49-9099.01 occupation definition covers power generation technology, monitoring and maintenance, and ground-source heat pump installation and testing.
- U.S. O*NET Job Zone 1-2 and SVP below 6.0 are a general preparation range. The education question asks 'what education do new hires need', and 66% answer a high school diploma or equivalent, 20% a postsecondary certificate, and 12% some college, no degree; this is not the education distribution of existing workers and does not prove one uniform education or training duration for all positions. Actual entry conditions are checked against the target posting and jurisdiction.
Usage limits:An occupation-level description that does not constitute electrical, mechanical, geothermal resource, pressure piping, safety or investment advice.
49-9099 parent occupation; not 49-9099.01U.S. Bureau of Labor Statistics|United States|2025—2035|official employment trends
View original material:49-9099 parent occupation; not 49-9099.01- BLS direct table 2025—2035: parent occupation 49-9099 employment 205,200 people in 2025 and 210,600 in 2035, growth 2.6%, average annual job openings 18,300. The table is shown in thousands; multiply each by 1000. Growth is net change, and openings include both growth and replacement demand — the two are different. This parent occupation includes other installation, maintenance and repair work and does not represent 49-9099.01 Geothermal Technicians themselves, actual hiring or individual opportunities; the
- The new direct table takes precedence; the
Usage limits:O*NET notes on that page that the employment data come from the parent occupation 49-9099.00 and do not represent 49-9099.01's own scale.
49-9099.00 parent occupationO*NET / U.S. Bureau of Labor Statistics|United States|2025 BLS OEWS wage data via O*NET|official wage display
View original material:49-9099.00 parent occupation- For checking the median hourly wage 23.67 USD / median annual wage 49,230 USD and the 10th/25th/75th/90th percentiles (36,080 / 42,170 / 61,900 / 77,040 USD per year).
- To explain that wage percentiles are not experience levels and do not equal personal starting pay, and that they use the parent occupation measure.
Usage limits:OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels.
Industry and five-category aggregation; the precise geothermal occupation is not broken outNational Bureau of Statistics|Mainland China|2025 data; published 2026-05-15; read in this batch|official statistics release
View original material:Industry and five-category aggregation; the precise geothermal occupation is not broken out- Industry and five-category aggregation, not the precise occupation's wage percentiles.
- No cross-jurisdiction use, and no substituting an industry average for the occupation's wage.
Usage limits:Insufficient evidence: this round actually read the National Bureau of Statistics 2025 urban unit wage release, which contains industry and five-category aggregation, but obtained no national wage percentiles or employment scale that can be precisely matched to 49-9099.01 Geothermal Technicians. The legacy MOHRSS link is retained as a lead to be checked, and the absence of national statistics is not asserted from unread text; industry averages, job-posting offers or US data are not substituted.
A legacy enterprise compensation survey lead whose body text was not readMinistry of Human Resources and Social Security of the People's Republic of China|Mainland China|The original link points to a 2025 release; the body text was not verified|official survey release
View original material:A legacy enterprise compensation survey lead whose body text was not read- Kept as a lead to be checked, not used as current evidence for the occupation's figures.
- The actual China gap is limited to the NBS2025 release that was actually read.
Usage limits:This round did not check the full text or statistical tables, so no claim is made that the country lacks data and no wage is extracted.
Articles 4/6/13/19: boundaries of personal information processingPublished by the State Administration for Market Regulation, carrying a National People's Congress law|Mainland China|In force from 2021-11-01; read in this batch|statute
View original material:Articles 4/6/13/19: boundaries of personal information processing- For identifiable personal information, check the lawful basis for processing, necessity and retention period.
- Equipment parameters or locations are not automatically personal information; consent is not the only lawful basis.
Usage limits:The legal text and the interpretation of the competent authority prevail.
Articles 28/30: training according to the actual activity and special operation qualificationsMinistry of Emergency Management of the People's Republic of China|Mainland China|In force from 2021-09-01; read in this batch|statute
View original material:Articles 28/30: training according to the actual activity and special operation qualifications- Training and the special operation qualifications within the legally listed scope are checked separately.
- No single certification list is inferred for everyone from the occupation name.
Usage limits:The regulations and requirements issued by the competent authority prevail.
Articles 80/150/151: monitoring authenticity, emissions, permitsMinistry of Ecology and Environment of the People's Republic of China|Mainland China|In force from 2026-08-15; read in this batch|statute
View original material:Articles 80/150/151: monitoring authenticity, emissions, permits- Check emission standards and applicable permits according to law, and keep environmental records truthful.
- No single reinjection or excavation authority is inferred for all geothermal projects.
Usage limits:The old Environmental Protection Law has been repealed; the provisions applicable to a specific activity and the emission scope are checked separately, and not all projects share the same permit.
Articles 34/35: training and health examinations for those exposed to occupational disease hazardsPublished by the Beijing Municipal Health Commission, carrying a National People's Congress law|Mainland China|2018 amendment; read in this batch|statute
View original material:Articles 34/35: training and health examinations for those exposed to occupational disease hazards- Occupational health requirements are determined by the actual exposure to hazards.
- No uniform medical examination or common cycle is inferred for all technicians.
Usage limits:The regulations and requirements issued by the competent authority prevail.
Catalogue equipment, qualifications of relevant personnel, maintenance and inspection, statutory bodiesState Administration for Market Regulation|Mainland China|In force from 2014-01-01; read in this batch|statute
View original material:Catalogue equipment, qualifications of relevant personnel, maintenance and inspection, statutory bodies- The actual equipment catalogue and the type of work determine the qualification requirements.
- Statutory inspection bodies and personnel qualifications differ from ordinary repair or paper records.
Usage limits:Articles 2/14/39—42/50—51 apply according to the equipment and activity; ordinary heat pumps do not all require certification.
Task and ISCO classification exposure indexInternational Labour Organization|Global|Research of 2025-05-20; read in this batch|research publication
View original material:Task and ISCO classification exposure index- Task exposure does not equal adoption, automation or the disappearance of the role.
- This round obtained no precise mapping for 49-9099.01, so no dedicated exposure level can be given.
Usage limits:Task exposure does not equal automatic disappearance of the role or a specific adoption rate.
49-9099.01 exact occupationO*NET OnLine / National Center for O*NET Development|United States|O*NET updated 2025; precise page read on 2026-10-03|official occupation custom profile
View original material:49-9099.01 exact occupation- For checking this occupation's tasks, work activities, work context, interest code (RCI) and Job Zone 1-2.
- For distinguishing differences in task preference from adjacent operations, maintenance and operating roles.
Usage limits:An occupation-level description, not for individual prediction.
AI risk governanceNIST|United States|AI RMF 1.0|governance framework
View original material:AI risk governance- For governance and risk control principles.
- For clarifying responsibility ownership, rollback and audit arrangements when adopting digital tools.
Usage limits:Not electrical safety or pressure piping or special equipment or environmental protection standards.
OEWS methodologyU.S. Bureau of Labor Statistics|United States|Version of 2026-09-24; actually read in this batch|official methodology
View original material:OEWS methodology- Employer wage estimate coverage, not an individual contract or a total benefits package.
- Included items such as production bonuses and commissions and excluded items such as non-production bonuses and overtime premiums must be checked separately.
Usage limits:OEWS is an employer wage estimate that excludes self-employment and benefits; it includes production bonuses, commissions and some allowances, and excludes non-production bonuses, overtime premiums and shift differentials. Hourly and annual wages are taken independently from official values and cannot be precisely divided by 2080 to infer personal income. Percentiles only mark a position in the wage distribution and do not represent experience or qualification levels.
49-9099.01 exact occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|US national job-posting mentions 2025-01-01—12-31|official technology display
View original material:49-9099.01 exact occupation- AutoCAD/Excel/Office/Outlook/Word/SAP, 6 items in total, with all shares NA.
- PLC or industrial control does not equal generative AI.
Usage limits:The shares for the 6 items on the hot technologies page are all NA and the detail page lists 9 software categories; they do not represent actual adoption or a coding threshold.
Body text of a historical technical vacancy notice for the Dominica 10 MW projectDominica Geothermal Development Company|Dominica|2025-08-07|project employer vacancy announcement
View original material:Body text of a historical technical vacancy notice for the Dominica 10 MW project- The body text lists directions such as EI&C Technician, Mechanical Maintenance Technician and Plant Operator.
- No unverified education, experience, salary or headcount is stated.
Usage limits:Attachments were not read; it does not prove current hiring, SOC mapping, the overall market or Chinese and US wages.
49-9099.01 exact occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|current page; accessed 2026-09-21|official certification discovery
View original material:49-9099.01 exact occupation- CVCLD/CRGD/CGD/Accredited Installer/CGD from another body, 5 items in total.
- Current paths are checked separately with the IGSHPA transition, the AEE halt on new applications and the NGWA drilling experience conditions.
Usage limits:The 5 names in the catalogue are a discovery entry point; historical names do not prove that application is currently possible, and the issuing body must be checked.
Ground-source heat pump modular courses, transition of old certificationsInternational Ground Source Heat Pump Association|United States|Page of 2026-10-03|issuer training information
View original material:Ground-source heat pump modular courses, transition of old certifications- AI/CGD/CGI/CRD legacy course transition; the design, installation, repair and inspection directions are each checked separately.
- No current general eligibility to apply is inferred from the catalogue's old names.
Usage limits:Old courses are being phased out and AI is arranged case by case; new courses and certificates differ from statutory permits.
51-8013.04 exact occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|current; accessed 2026-09-21|official occupation details
View original material:51-8013.04 exact occupation- For checking the task boundaries of on-site operation, maintenance and testing of hydraulic structures and hydro units.
- For distinguishing a geothermal site from hydraulic structures and hydro units.
Usage limits:An adjacent occupation measure, not equal to this occupation.
51-8013.03 exact occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|current; accessed 2026-09-21|official occupation details
View original material:51-8013.03 exact occupation- For checking the maintenance task boundaries of biomass fuel, boiler, turbine and flue gas equipment.
- For distinguishing a geothermal site from fuel, combustion and emission equipment.
Usage limits:An adjacent occupation measure, not equal to this occupation.
Vertical closed-loop drilling certification experience and qualificationsNational Ground Water Association|United States|Page of 2026-10-03|issuer certification requirements
View original material:Vertical closed-loop drilling certification experience and qualifications- Conditions include being at least 20 years old, 24 consecutive months of relevant drilling experience, an examination and documentation.
- Only the occupational certification conditions are taken, without citing the page's tax policy or market growth forecasts.
Usage limits:A voluntary professional certification, not a general certificate for people with no experience or a government construction permit.
Ground-source heat pump design CGD has stopped accepting new applications; existing holders can renewAssociation of Energy Engineers|United States|Page of 2026-10-03|issuer program status
View original material:Ground-source heat pump design CGD has stopped accepting new applications; existing holders can renew- New applications are no longer accepted; renewal for existing holders is checked separately.
- The sample job titles for the occupation come from O*NET, not from the SOC title file.
Usage limits:It cannot serve as a tutorial for applying for CGD as a newcomer today, and it is not a power plant permit.
2024 parent occupation 49-9099.00 industries; not the precise geothermal occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|2024 industry data; shown on the precise page on 2026-10-03|official industry distribution
View original material:2024 parent occupation 49-9099.00 industries; not the precise geothermal occupation- Administrative support 16%, manufacturing 11%, wholesale 11%, construction 10%, retail 10%.
- It only describes the parent occupation distribution and cannot be used to infer geothermal technicians' actual employers.
Usage limits:O*NET notes on that page that the industry data come from the parent occupation 49-9099.00; that measure is the US distribution and does not establish a mainland China mapping.
49-9099.00 exact occupationO*NET OnLine / U.S. Bureau of Labor Statistics|United States|O*NET updated 2025; accessed 2026-09-21|official occupation profile
View original material:49-9099.00 exact occupation- For checking the parent occupation name and code presented by O*NET on the 49-9099.01 page (49-9099.00 Installation, Maintenance, and Repair Workers, All Other).
- To explain that the US figures on this page use the parent occupation measure rather than 49-9099.01's own values.
Usage limits:A parent occupation measure, not equal to this precise occupation; this page labels the sources of wages, employment and industry on that basis.
Three representative core tasks of this occupationFermatMind / 费马测试|2026-10-18|Editorial model estimation method
View original material:Three representative core tasks of this occupation- Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((50+25+0)/3+0.5)=25; fermatmind-ai-impact-v1; 2026-10-18.
- Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
- Operational monitoring and adjustment — 50/100; weight=1/3; geothermal-technicians.ai-impact.ai-impact-table.95[0]
- Fault identification and repair — 25/100; weight=1/3; geothermal-technicians.ai-impact.ai-impact-table.99[0]
- Heat pump and loop installation and commissioning — 0/100; weight=1/3; geothermal-technicians.ai-impact.ai-impact-table.107[0]
Usage limits:Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.
Insufficient evidence: no national, industry-level or regional wages and employment for Geothermal Technicians themselves, no precise AI exposure, adoption, substitution or wage causality, and no assessment-specific validity were obtained; China's precise occupation statistics are limited to what the NBS2025 actual read publication provides. Parent occupation figures and the editorial H1 do not substitute for precise data or individual conclusions.
Big Five Personality Test (Chinese) · MBTI Personality Test (Chinese) · Intelligence and Reasoning Test (Chinese) · Emotional Intelligence Test (Chinese)

