Preparing content…

General Maintenance and Repair Worker

SOC 49-9071

Equipment maintenance and fault diagnosisRepairs across tradesBuilding structure repairs
42%AI Impact ScoreFermatMind / 费马测试

General maintenance workers maintain buildings and equipment, respond to assigned requests, and document and refer problems needing a specialist. Exact duties depend on the site.

Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((75+50+0)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.

+4.2%U.S. projected employment change (2025–2035)U.S. Bureau of Labor Statistics
Source: U.S. Bureau of Labor Statistics|United States|2025–2035|Projected employment growth; Editorial conversion: BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring.
About 1,621,800 jobsU.S. jobs (2025)U.S. Bureau of Labor Statistics
Source: U.S. Bureau of Labor Statistics|United States|2025|2024 employment; Editorial conversion: BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring.
About 148,700 per yearU.S. annual openings (2025–2035)U.S. Bureau of Labor Statistics
Source: U.S. Bureau of Labor Statistics|United States|2025–2035|Average annual openings (2025–2035); Editorial conversion: BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring.
No data availableMainland China pay reference

Quick assessment

Who might be suited to general maintenance and repair?

The core work of general maintenance and repair workers is to combine two or more maintenance or craft skills to keep equipment and buildings usable: perform preventive maintenance by checking drives, motors, belts, and fluid levels and replacing filters, clean and lubricate bearings and gears, inspect and test equipment and diagnose faults, consult drawings and repair manuals, use tools and test equipment to dismantle equipment and replace defective parts, adjust and calibrate and install and balance new equipment, install and repair piping, electrical, and mechanical systems, set up and operate machine tools to make parts and weld and cut metal, repair doors, windows, floors, and wooden structures, paint and insulate, order parts, estimate costs, and record maintenance work.

The following assessments concern maintenance across multiple trades by general maintenance and repair workers. They do not predict hiring, qualifications, authorization, or contract outcomes.

Who is more likely to fit General Maintenance and Repair Worker?

Reference deliverable: first list the work order number, equipment model, conditions when the noise occurs, and gaps in maintenance records, then request information from the supervisor. The noise cause is unknown; do not assert bearing failure or directly order parts. List tools and parts only as candidates and purposes pending confirmation by authorized personnel, without inventing specifications. Register and report loose trim first; authorized personnel assess structural risk and handling. Acceptance records should include authorized inspection results, repair items, test conditions, and whether abnormalities were resolved. This exercise cannot conclude that equipment has been repaired. Assess whether each decision points back to A/B/C, separates facts from hypotheses, and retains safety and handover boundaries, then reflect on whether you can maintain reliable records.

When should you be cautious about choosing General Maintenance and Repair Worker?

This is an entirely fictional repair work order scenario check, not a personality diagnosis, hiring conclusion, or qualification assessment.

How can a small experiment test your fit for General Maintenance and Repair Worker?

Paper exercise, entirely fictional, 60 minutes: material A is a work order for a building supply fan already taken out of service, describing intermittent noise during operation without measurements or a root cause. Material B is a maintenance record: the filter was changed 30 days ago, no inspection is recorded this week, and the equipment is currently under the supervisor's control. Material C is a textual description of a photo showing loose trim on a corridor doorframe, without information on wall or load-bearing structural condition. You are a maintenance assistant without on-site work authorization and may only use these materials to write a diagnostic information list, conditional tool and spare part choices, safety and handover boundaries, acceptance evidence, and reporting paths. Do not energize, isolate energy, dismantle, or repair anything. List unknown models, causes, and structural conditions for confirmation.

Career profile

General maintenance workers maintain buildings and equipment, respond to assigned requests, and document and refer problems needing a specialist. Exact duties depend on the site.

Career quick answers

What can a general maintenance work sample show?

Use a fictional building work order. Record the location, symptom, impact, next step and person responsible. Mark tasks that would need a specialist.

Objects:

  1. 01Equipment and building structures, work orders and fault descriptions

Inputs:

  1. 01Drawings and manuals, tools and parts, and safety conditions
DeliverablesRestored operation and reviewable records

How does general maintenance differ from specialized repair?

General maintenance covers varied facilities and common requests. Specialists focus on a particular system or type of equipment. Employers set the referral rules.

DimensionPrimary trackComparison track
Work cycleFrom work orders to acceptance records
Step oneReceive work orders and check safety conditions
Step twoInspect, test, and diagnose faults
Step threeConsult drawings and manuals to determine methods
Step fourIsolate energy, dismantle, and replace
Step fiveAdjust, calibrate, and conduct trial runs
Step sixRepair structures, document, and report

Core responsibilities

  1. 01

    Inputs: equipment and building structures needing maintenance, work orders and repair records, drawings and repair manuals, hand and power tools, measuring and electrical test equipment, spare parts and supplies, lubricants and filter materials, and safety protective supplies.

  2. 02

    Inspectable outputs: equipment and systems restored to normal operation, completed structural and carpentry repairs, replaced parts and filters, calibrated and balanced new equipment, maintenance and cost records, ordering and acceptance records, and abnormality and reporting records.

  3. 03

    Complete workflow: receive work orders and check safety conditions → inspect, test, and diagnose faults → consult drawings and manuals to determine methods → isolate energy, dismantle, and replace parts → adjust, calibrate, and conduct trial runs → machine or weld parts where needed → repair structures and clean up → document, accept, and report abnormalities.

What are the qualification boundaries?

In the US, this occupation falls within Job Zone 3. Most jobs require vocational school training, related experience, or an associate degree, plus one to two years of training. Specialist electrical, plumbing, and HVAC / refrigeration work requires licenses or qualifications for the relevant jurisdiction. This page does not assess individual eligibility.

  1. Boundary

    Verify jurisdiction, employer, and safety procedure requirements

  2. Jurisdiction

    Follow the rules of the relevant country or region

  3. Organization

    Confirm employer and regulator requirements

  4. Training

    Confirm apprenticeship or on-the-job training requirements

  5. Responsibility

    Confirmed by facility supervisors and employers

  6. Evidence

    Keep reviewable records

Work reality

Key judgments: how to determine root causes and system boundaries, isolate energy and ensure work safety, choose between replacing and repairing parts, calibrate and accept repairs, and identify tasks beyond authorization requiring specialist trades or outside contractors.

O*NET structured fields

Research inputs
Research inputs
Research inputs: occupational identity, tasks, work activities, work context, skills and knowledge, interest code, education, and Job Zone for O*NET 49-9071.00. Pay, employment, and industry data on that page cover this occupation. These findings do not establish mainland Chinese qualifications, wages, or employment categories.

Work objects and AI boundaries for general maintenance and repair workers Editorial task hypothesis: distinguish CMMS scheduling, sensor-based fault prediction, and drawing retrieval from generative AI. The latter may organize fictional work order drafts; no adoption rates or job outcomes were obtained for this occupation. Personnel must verify on-site diagnosis, energy isolation, repairs, and acceptance under procedures. Model suggestions do not confer equipment / electrical work authority.

Career direction comparison

Adjacent occupation comparison

The comparison below uses actual work objects, core deliverables, and responsibility boundaries for general maintenance and repair workers and adjacent roles. Job titles do not make qualifications interchangeable.

Adjacent occupation comparison
Career directionCore work and outputKey differencesBest-fit choice
Machinery Maintenance WorkerMachinery maintenance workers perform routine care and simple repairs on production equipment. General maintenance and repair workers cover equipment and building repairs across trades, with broader scope but different depth in individual specialties.Performs routine care of production equipment.Compare this direction if you prefer equipment maintenance.
Industrial Machinery MechanicIndustrial machinery mechanics perform in-depth diagnosis and repair of industrial machinery, often involving control systems. General maintenance and repair workers focus on broad maintenance and often hand over complex diagnosis.Performs in-depth diagnosis and repair of industrial machinery.Compare this direction if you prefer in-depth machinery repair.
HVAC and Refrigeration TechnicianHVAC and refrigeration technicians install and repair HVAC and refrigeration equipment. General maintenance and repair workers may perform routine HVAC maintenance, while specialized system work is divided by authorization.Installs and repairs HVAC and refrigeration equipment.Compare this direction if you prefer HVAC and refrigeration.
Plumbers and ElectriciansPlumbers and electricians perform specialized installation and repair of piping and electrical systems, often requiring licenses. General maintenance and repair workers handle routine maintenance and hand over licensed or high-risk work according to jurisdiction.Perform specialized work on piping and electrical systems.Compare this direction if you prefer obtaining a specialist license.

How to choose

First use a reviewable explanation of repair records to verify objects, methods, and safety boundaries, then assess directions. Do not assign a single ranking by income or personality.

Next, turn the comparison into a small repair exercise that can be stopped.

AI impact on this career

Boundaries of AI impact on general maintenance and repair workers

Editorial task hypothesis: distinguish CMMS scheduling, sensor-based fault prediction, and drawing retrieval from generative AI. The latter may organize fictional work order drafts; no adoption rates or job outcomes were obtained for this occupation. Personnel must verify on-site diagnosis, energy isolation, repairs, and acceptance under procedures. Model suggestions do not confer equipment / electrical work authority. AI Impact Score 42% is an editorial estimate. Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((75+50+0)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.The three tasks, ratings and sources are listed in the FermatMind method source record on this page.

AI assessment method and sources

FermatMind AI Impact Score estimation method v1

FermatMind / 费马测试 · 2026-10-18

  • Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((75+50+0)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.
  • Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
  • Scheduling and maintenance interval management — 75/100; weight=1/3
  • Inspection, testing, and fault diagnosis — 50/100; weight=1/3
  • Isolate energy and replace parts — 0/100; weight=1/3

Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.

Technical capability

Describe only the specific steps tools may assist; a demonstration does not establish organizational adoption.

Adoption conditions

Check data sources, system reliability, and review responsibilities. This page has no occupation-specific adoption rate.

Job outcomes

Without occupational job outcome research, do not infer layoff timing, staffing changes, or hiring probabilities.

Task impact matrix

Comparison of AI impact across career tasks
Work areaTaskCurrent changeHuman control point
Scheduling and preventive maintenanceScheduling and maintenance interval managementEditorial trial suggestion: a small sample draft using fictional materials only. Ordinary dedicated software differs from generative AI; widespread organizational adoption in this occupation has not been established.Check equipment condition and safety conditions.
Diagnosis and repairInspection, testing, and fault diagnosisMay assist fault alertsFollow work orders and energy isolation and safety procedures, retaining human diagnosis and records.
Dismantling and replacementIsolate energy and replace partsDoes not make automated decisionsIsolate under procedures and perform manual operations.
Records and acceptanceRecord maintenance and accept workMay assist summariesConfirmed by the facility supervisor.

What judgments does this evidence support?

Occupational sources describe actual tasks and objects handled: equipment and buildings, work orders and manuals, tools and test equipment, parts and records. Tool capabilities, organizational adoption, and job outcomes are recorded separately; pay or employment data do not substitute for AI evidence.

O*NET 49-9071.00 General Maintenance and Repair Workers (Summary)

View source ↗
Subject
Identity and scope of 49-9071.00
Finding
Supports identity and task boundaries
Limitation
US scope for this occupation; excludes Chinese data.

O*NET 49-9071.00 Tasks

View source ↗
Subject
Tasks of 49-9071.00
Finding
Supports task breakdown, not AI adoption rates
Limitation
Does not replace local law or employer procedures.

O*NET 49-9071.00 Work Context

View source ↗
Subject
Work context of 49-9071.00
Finding
Supports environment and safety judgments
Limitation
Does not replace safety and protection procedures.

Why does impact differ by work direction?

Editorial analysis: scheduling, maintenance interval reminders, and record summaries may be candidates for assistance tool trials. This page obtained no comparative research on AI automation levels across stages. On-site diagnosis, dismantling and replacement, calibration and acceptance, and safe work remain subject to job procedures and authorization.

Scheduling and records

AI primarily changesMay organize work order drafts; CMMS and predictive maintenance do not establish generative AI adoption.

Human responsibility remainsSafety and condition checks

Diagnosis and repair

AI primarily changesEditorial analysis: fault alerts require validation of inputs, equipment, and model applicability. No automation percentage is inferred.

Human responsibility remainsRoot cause decisions, dismantling, and repairs

Accountability must remain intact when AI enters professional workflows

Human control points include checking orders and safety conditions, isolating energy, determining root causes, calibrating and accepting work, identifying work beyond authorization, and taking responsibility for repair quality and safety.

  1. Check inputs

    Confirm work orders, equipment condition, and safety conditions.

  2. Limit the task

    Operate only within authorization and procedures.

  3. Human review

    Review diagnosis, isolation, and acceptance.

  4. Record and escalate

    Report abnormalities and work beyond scope promptly.

Professional risks of using AI

Energy isolation and mechanical injury

Failure to isolate energy may cause serious injury.

Control: Perform lockout/tagout and energy isolation.

Work at height and confined spaces

May involve falls or oxygen deficiency risks.

Control: Use fall prevention and ventilation measures under procedures.

Electrical and energized equipment

May cause electric shock injuries.

Control: Disconnect power, verify absence of voltage, and have qualified personnel perform the work.

How should different audiences respond?

New entrants

Start with paper diagnosis and safety boundary organization. Real tool use and energy isolation require training and authorization under supervision.

Current workers

Keep maintenance and abnormality records.

Managers

Set safety and authorization boundaries first.

Common questions about AI and career development

Will AI replace general maintenance and repair workers?

Task exposure, adoption, and job outcomes measure different things and cannot establish a job elimination date.

Source: O*NET 49-9071.00 TasksOriginal source ↗

Which stage will automation affect first?

Current discussion covers only potential assistance with scheduling, maintenance interval reminders, and record summaries. People still handle on-site diagnosis, dismantling and replacement, and safety judgments.

Source: O*NET 49-9071.00 TasksOriginal source ↗

Does this page have adoption rate data?

Without an occupation-level adoption rate source, this page does not provide such figures.

Source: O*NET 49-9071.00 General Maintenance and Repair Workers (Summary)Original source ↗

Start with an offline exercise using an entirely fictional repair work order. Record diagnostic steps, tools and parts, repair and safety boundaries, without relying on unverified automated diagnosis to replace human confirmation.

Chinese mainland salary reference

Mainland China: wage evidence and industry background

Scope note: National Bureau of Statistics figures for 2025 average annual wages in resident services, repairs, and other services are 70,226 yuan per year for urban nonprivate units and 52,059 yuan per year for urban private units. The national urban nonprivate total is 129,441 yuan per year. All are industry figures, not this occupation's median or starting pay.

Official statistical scope

Category boundary: enterprise remuneration survey information from the Ministry of Human Resources and Social Security is published by occupation / position and may support related maintenance and repair pay lookups. This page did not obtain an entry precisely matching O*NET 49-9071.00 and does not use it as a national occupational median. Refer to releases by the responsible authority.

National · Resident services, repairs, and other services, nonprivate

Only average annual wages are published

National · Resident services, repairs, and other services, private

Only average annual wages are published

Precise occupational wage

Insufficient evidence: precise scope not obtained

Scenario reference

This page did not obtain a precise mainland Chinese occupational wage. The industry averages below provide background only and cannot replace this occupation's starting pay, median, or take-home income.

This scenario illustrates statistical scope only and is not an individual pay quote.
Job scopeReference valueExplanation
Not separately reportedAppointment depends on employer and positionNational Bureau of Statistics wage statistics are organized by industry and registration type, not by education level within this occupation.
Not separately reportedAppointment depends on employer and positionNational Bureau of Statistics wage statistics are organized by industry and registration type, not by education level within this occupation.
Not separately reportedAppointment depends on employer and positionNational Bureau of Statistics wage statistics are organized by industry and registration type, not by education level within this occupation.
Not separately reportedAppointment depends on employer and positionNational Bureau of Statistics wage statistics are organized by industry and registration type, not by education level within this occupation.

Influencing factors

Resident services, repairs, and other services, nonprivate

70,226 yuan per year

Resident services, repairs, and other services, private

52,059 yuan per year

National total for urban nonprivate units

129,441 yuan per year

Boundaries for AI and pay judgments

Insufficient evidence: a national occupational wage median, reference period, and matching scope for general maintenance and repair workers in mainland China were not obtained. This page displays only explicitly labeled industry proxies and does not fill the gap with proxy figures or US figures.

U.S. salary reference

US pay and employment scope for general maintenance and repair workers: occupation 49-9071.00

O*NET's national wages page reports 2025 BLS OEWS annual pay at the 10th/50th/90th percentiles of 35,350/49,590/77,180 dollars, with corresponding hourly percentiles of 17.00/23.84/37.11 dollars. BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring. These are US national figures for occupation 49-9071.00; projections are not individual employment outcomes.

Pay statistics: the 2025 US national pay distribution for occupation 49-9071.00. The 10th/50th/90th percentiles are not beginner, intermediate, or senior pay grades and do not represent starting pay or individual take-home income.

Pay statistics: the 2025 US national pay distribution for occupation 49-9071.00. The 10th/50th/90th percentiles are not beginner, intermediate, or senior pay grades and do not represent starting pay or individual take-home income.
PercentileAnnual referenceHourly equivalentExplanation
10th percentile$35,350 per year$17.00 per hour2025 US national 10th percentile for this occupation. Annual and hourly values each come from the official table and do not represent individual seniority grades.
Median (50%)$49,590 per year$23.84 per hour2025 US national median annual pay for occupation 49-9071.00.
90th percentile$77,180 per year$37.11 per hour2025 US national 90th percentile for this occupation. Annual and hourly values each come from the official table and do not represent individual seniority grades.

Pay · Median:$49,590 per year (2025);O*NET 49-9071.00 National Wages (BLS OEWS display)

Pay · Hourly median:$23.84 per hour (2025);O*NET 49-9071.00 National Wages (BLS OEWS display)

Pay · 10th percentile:$35,350 per year (2025, 10th percentile);O*NET 49-9071.00 National Wages (BLS OEWS display)

Pay · 90th percentile:$77,180 per year (2025, 90th percentile);O*NET 49-9071.00 National Wages (BLS OEWS display)

Pay · Statistical scope:Maintenance and Repair Workers, General(49-9071.00);O*NET 49-9071.00 National Wages (BLS OEWS display)

How to interpret these positions: O*NET's national wages page reports annual and hourly pay percentiles separately. Do not treat percentiles as seniority levels or individual pay guarantees. Explain employment size, growth projections, and annual openings separately from individual opportunities.

Pay

Dollars per year: the 2025 US national 10th/50th/90th percentiles are 35,350/49,590/77,180 for occupation 49-9071.00, not seniority grades or individual take-home income.

Employment

The 2025 base measures jobs, not vacancies.

Outlook

BLS Table 1.2 for 49-9071: about 1,621,800 U.S. jobs in 2025, about 1,690,500 projected in 2035 (+4.2%), and about 148,700 annual openings including replacements.

Industry

May 2025 industry-specific median annual pay for the same occupation. These are different employer industries, not individual seniority grades or pay quotes transferable across regions.

The BLS OOH Pay table provides May 2025 median annual pay for general maintenance and repair workers in real estate and rental and leasing, manufacturing, government, and educational services. These are industry-specific wages for the same occupation, not industry employment shares or demand projections.

The BLS OOH Pay table provides May 2025 median annual pay for general maintenance and repair workers in real estate and rental and leasing, manufacturing, government, and educational services. These are industry-specific wages for the same occupation, not industry employment shares or demand projections.
IndustryMedian annual pay, dollars per yearHow to interpret
Real Estate and Rental and Leasing$48,360 per yearMay 2025 industry-specific median for occupation 49-9071 from the BLS OOH Pay table; not the national median, individual starting pay, or take-home income.
Manufacturing$61,500 per yearMay 2025 industry-specific median for occupation 49-9071 from the BLS OOH Pay table; not the national median, individual starting pay, or take-home income.
Government, excluding state and local education and hospitals$51,160 per yearMay 2025 industry-specific median for occupation 49-9071 from the BLS OOH Pay table; not the national median, individual starting pay, or take-home income.
Educational services; state, local, and private$50,270 per yearMay 2025 industry-specific median for occupation 49-9071 from the BLS OOH Pay table; not the national median, individual starting pay, or take-home income.

Employment size and scope reminder: this occupation had about 1,629,700 workers in 2024 and is projected to grow at an average rate. Citations must state the year, coverage, and occupational scope; medians and growth descriptions cannot be spliced across markets.

Qualifications

US O*NET places this occupation in Job Zone 3. Vocational schooling, experience or an associate degree, and one to two years of training are general group preparation descriptions, not uniform occupational thresholds. BLS describes the occupation's path as typically high school or equivalent followed by on-the-job learning with experienced workers, with entry also possible through apprenticeships or training programs. Check employers for specific requirements. Specialist work requires separate checks of local licenses or qualifications and employer authorization.

Experience

Editorial suggestion: show experience through diagnosis, tool use, and safety control records. BLS supports on-the-job learning paths but provides no comparison of hiring weights for experience versus certificates.

Region

Strongly influenced by facility types and industry distribution; do not extrapolate across regions.

Employment outlook and openings

Fit signals

Fit signals: start with observable work behavior

To assess fit, first consider whether you can troubleshoot systematically and perform hands-on dismantling and repairs, remain reliable across multiple tasks and time pressure, follow energy isolation and safety procedures, judge whether work exceeds authorization, and take responsibility for repair quality and safety. Tools such as RIASEC can only suggest hypotheses and cannot replace real task experience.

Positive signals: Positive signals: systematic diagnosis and hands-on repairs, tool and test equipment use, compliance with safety and isolation procedures, and documentation and collaboration.

Reasons for caution: Reasons for caution: acting on guesses instead of systematic troubleshooting, difficulty remaining reliable under downtime and work order pressure, reluctance to follow energy isolation and protection procedures, or inability to judge authorization boundaries.

Trial activity: Trial activity: use the fictional A/B/C materials above only to organize diagnostic information and write tool and part candidates and safety boundaries on paper, asking another person to review the records. Without on-site work authorization, do not actually isolate energy, dismantle equipment, or test equipment.

Do not let one test decide your career

RIASEC

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

The RIASEC interest code is RC, Realistic–Conventional: a preference for hands-on repairs and troubleshooting through defined procedures. These labels describe activity preferences only and cannot determine competence or qualifications.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

Big Five personality

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

General personality scales such as the Big Five do not provide job evidence for this occupation and may be used only for self-reflection. Continue checking against real repair operations, testing and diagnosis, and safe work experience.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

MBTI

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

Type tools such as MBTI and the Enneagram cannot determine competence or qualifications and may be used only for self-reflection.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

Enneagram

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

Continue checking against real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

Cognitive ability

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

Continue checking against real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

Emotional ability

Editorial note; no validity studies for this occupation provided

Check using work samples rather than replacing judgment with labels.

Continue checking against real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: Hiring, qualifications, or performance cannot be inferred from this.

Start a career interest trial

Which repair and maintenance direction might suit you better?

Preventive maintenance

Fits better when: Can inspect and replace wear parts according to plan.

Watch for: Must check equipment and safety conditions.

Fault diagnosis

Fits better when: Can systematically inspect, test, and diagnose.

Watch for: Must consult drawings and manuals.

Dismantling and replacement

Fits better when: Can isolate energy and safely dismantle and replace parts.

Watch for: Must perform lockout/tagout.

Calibration and installation

Fits better when: Can adjust, calibrate, and install equipment.

Watch for: Must accept work against standards.

Building and structural repairs

Fits better when: Can repair doors, windows, floors, and wooden structures.

Watch for: Must attend to structural and work safety.

Documentation and collaboration

Fits better when: Can document and coordinate contractors.

Watch for: Must keep truthful records and report.

Career fit questions

Can you troubleshoot systematically?

Use this page's work sample to check diagnostic processes.

Can you isolate energy safely?

Check lockout/tagout and voltage verification under procedures.

Can you remain reliable across multiple tasks?

Assess reliability under work order and time pressure.

What would you do if work exceeded your authorization?

Stop and hand over to qualified personnel.

Can you use tools and test equipment?

Check tool and testing skills against job standards.

Can you take responsibility for repair quality?

Assess your acceptance of documentation and acceptance checks.

How can others review your work?

Use maintenance and abnormality records to enable review by others.

What trial comes next?

Complete an exercise using an entirely fictional repair work order.

Risks and boundaries

Work risks and boundaries for general maintenance and repair workers

Address risks through triggers, consequences, controls, and escalation boundaries.

Based on tasks and work context for O*NET 49-9071.00, plus specific requirements for energy isolation, work at height and in confined spaces, electrical systems and equipment, tools, and chemicals. Check specific rules against employer requirements and applicable regulations; do not extrapolate across scopes.

01

Energy isolation and mechanical injury risks

Typical scenario:Dismantling without energy isolation or lockout/tagout.

Roles most affected:Repair roles

Possible consequence:May cause mechanical or electrical injuries.

How to reduce risk:First check tasks and hazardous energy. Trained, authorized personnel must isolate energy, control stored energy, and confirm a safe state under equipment-specific applicable procedures. Hand over electrical and other specialist operations beyond authorization.

Evidence:OSHA: Control of Hazardous Energy

02

Work at height and confined space risks

Typical scenario:Work at height or in cramped spaces without protection.

Roles most affected:Structural and equipment work roles

Possible consequence:May involve falls or oxygen deficiency risks.

How to reduce risk:Assess work at height and confined spaces separately. Do not work before confirming protection, entry procedures, personnel training, and rescue arrangements; refer to the on-site safety lead. Ventilation alone does not justify entry.

Evidence:OSHA: Confined Spaces · OSHA: Fall Protection

03

Electrical and energized equipment risks

Typical scenario:Unqualified personnel handling energized or specialist work.

Roles most affected:Electrical and specialist work roles

Possible consequence:May cause electric shock or violations.

How to reduce risk:Assign work to qualified personnel under jurisdiction and authorization requirements.

Evidence:O*NET 49-9071.00 Tasks

04

Tool and chemical use risks

Typical scenario:Improper tool or chemical use.

Roles most affected:Repair roles

Possible consequence:May cause injury or fire.

How to reduce risk:Follow use procedures and wear protection.

Evidence:O*NET 49-9071.00 Work Context

05

Authorization boundary risks across trades

Typical scenario:Entering specialist electrical, HVAC, or other systems without checking qualifications or job authorization.

Roles most affected:Repair roles

Possible consequence:May cause unauthorized operation, safety injuries, and compliance risks.

How to reduce risk:First check location, equipment, tasks, and individual authorization boundaries. If these cannot be confirmed, stop and hand over to personnel with the relevant qualifications or authorization.

Evidence:O*NET 49-9071.00 Tasks

06

Repairing before root causes are verified

Typical scenario:Choosing root causes and parts by guesswork without testing or manual support.

Roles most affected:Repair roles

Possible consequence:May cause recurring faults, equipment damage, or downtime.

How to reduce risk:Systematically organize diagnostic evidence and unresolved items, report when confirmation is not possible, and accept repairs against applicable standards.

Evidence:O*NET 49-9071.00 General Maintenance and Repair Workers (Summary)

Entry paths

Entry paths and stages of capability

US O*NET places this occupation in Job Zone 3. Vocational schooling, experience or an associate degree, and one to two years of training are general group preparation descriptions, not uniform occupational thresholds. BLS describes the occupation's path as typically high school or equivalent followed by on-the-job learning with experienced workers, with entry also possible through apprenticeships or training programs. Check employers for specific requirements.

General facility maintenance

01

Repair assistant / apprentice

Typical scope:Entry stage: practice inspections and testing, fault diagnosis, tool and test equipment use, energy isolation, and basic repairs under supervision. Learn safety procedures and retain process records.

Readiness evidence:Work samples: submit an A/B/C material index, known and unconfirmed information list, conditional tool and part table, safety and handover boundaries, acceptance evidence template, and draft supervisor report. Do not invent successful repair records. Seven-day paper plan: day 1 organize the three materials; day 2 list missing information; day 3 write candidate diagnostic paths; day 4 distinguish tool purposes from specifications awaiting confirmation; day 5 write safety and handover boundaries; day 6 create acceptance and reporting templates; day 7 ask another person to trace each item to the materials and correct unsupported root cause or part decisions. Do not operate real equipment at any point.

Credential boundary:Verify apprenticeship or on-the-job training requirements.

Next moves:Next step: check the target employer's equipment and building types, energy isolation and safety procedures, part and acceptance standards, and authorization and handover boundaries. Validate diagnostic and safety skills through supervised real repairs.

02

General Maintenance and Repair Worker

Typical scope:Independently diagnose, repair, and accept work and undergo inspections.

Readiness evidence:Keep repair and safety records.

Credential boundary:Verify employer requirements.

Next moves:Moving toward greater responsibility: with experience, workers may handle complex diagnosis and preventive maintenance plans, mentor new workers and coordinate contractors, or move into specialist trades such as electrical, HVAC, and machinery repair, or facility management.

03

Senior repair worker / mentor

Typical scope:Handle complex diagnosis and mentor new workers.

Readiness evidence:Keep complex repair and mentoring records.

Credential boundary:Verify employer requirements.

Next moves:Add evidence of complex diagnosis and mentoring capability.

04

Facility supervisor

Typical scope:Manage maintenance plans and teams.

Readiness evidence:Keep planning and quality records.

Credential boundary:Verify employer requirements.

Next moves:Add evidence of management and quality capability.

Transition to specialist trades

01

Specialist apprentice

Typical scope:Learn electrical / HVAC / machinery repair under supervision.

Readiness evidence:Keep training and practice records.

Credential boundary:Verify jurisdictional apprenticeship and licensure requirements.

Next moves:Build foundations in specialist theory and practice.

02

Specialist technician

Typical scope:Independently work on the relevant systems.

Readiness evidence:Keep work and acceptance records.

Credential boundary:Obtain licenses or qualifications for the jurisdiction.

Next moves:Build specialist and safety knowledge.

03

Specialist technical lead

Typical scope:Handle complex systems and quality improvements.

Readiness evidence:Keep specialist work and improvement records.

Credential boundary:Verify jurisdiction and employer requirements.

Next moves:Build specialist and collaboration knowledge.

04

Specialist supervisor

Typical scope:Manage teams and technical standards.

Readiness evidence:Keep team and standards records.

Credential boundary:Verify employer requirements.

Next moves:Add evidence of management responsibility.

Transition to preventive maintenance and facility management

01

Maintenance planning assistant

Typical scope:Participate in maintenance scheduling under supervision.

Readiness evidence:Keep scheduling and execution records.

Credential boundary:Verify employer requirements.

Next moves:Build maintenance system knowledge.

02

Preventive maintenance specialist

Typical scope:Handle maintenance plans and data analysis.

Readiness evidence:Keep planning and data records.

Credential boundary:Verify employer requirements.

Next moves:Build reliability data analysis knowledge.

03

Facility engineer

Typical scope:Handle facility systems and projects.

Readiness evidence:Keep system and project records.

Credential boundary:Verify employer requirements.

Next moves:Build engineering and management knowledge.

04

Facility manager

Typical scope:Manage facilities and teams.

Readiness evidence:Keep facility and team records.

Credential boundary:Verify employer requirements.

Next moves:Add evidence of management responsibility.

Capability ladder: what demonstrates readiness?

  1. 01

    Check inputs

    Confirm work orders, equipment condition, and safety conditions.

  2. 02

    Process control

    Diagnose systematically, isolate energy, repair, and accept work.

  3. 03

    Outcome review

    Produce reviewable repair and abnormality records.

  4. 04

    Expanded responsibility

    Expand specialist and planning duties within authorization.

Market signals

Market signals and transition directions

BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring. These are occupational statistics, not individual hiring probabilities, and differ from recruitment samples.

Three sources, three different measures

US national scope

2025–2035

US national scope · Display scope: Maintenance and Repair Workers, General (49-9071.00)

BLS Table 1.2 for 49-9071: about 1,621,800 U.S. jobs in 2025, about 1,690,500 projected in 2035 (+4.2%), and about 148,700 annual openings including replacements.

Employment size and change

BLS Table 1.2 for 49-9071: about 1,621,800 U.S. jobs in 2025, about 1,690,500 projected in 2035 (+4.2%), and about 148,700 annual openings including replacements.

Does not establish:Pay and jobs use the U.S. occupational scope; projections do not measure current recruitment or individual outcomes.

US national scope

2025–2035

US national scope · Display scope: Maintenance and Repair Workers, General (49-9071.00)

About 148,700 per year

Openings, annual average

Annual openings include replacements.

Does not establish:Pay and jobs use the U.S. occupational scope; projections do not measure current recruitment or individual outcomes.

US national scope

2025

US national scope · Display scope: Maintenance and Repair Workers, General (49-9071.00)

$49,590 per year

Median annual pay

BLS 2025 OEWS national median; does not represent starting pay or take-home income.

Does not establish:The national median does not represent starting pay, seniority grades, or individual take-home income.

Where can your current capabilities transfer?

These are capability relationships, not automatic promotions or credential waivers.

Machinery Maintenance Worker

Evidence to add

Transfers:Transferable capabilities: equipment inspection and fault diagnosis, hand and power tool use, energy isolation and safe work, drawing and manual interpretation, part management and records, and collaboration across trades.

Build next:Moving into machinery maintenance requires routine inspection, lubrication, wear part replacement, and preventive maintenance procedures for target production equipment, plus checks of hazardous energy control and shutdown handover boundaries. General building repair experience does not establish industrial equipment maintenance capability.

View career profile

Industrial Machinery Mechanic

Evidence to add

Transfers:Equipment and mechanical foundations.

Build next:Add industrial machinery diagnosis and control system knowledge.

View career profile

HVAC and Refrigeration Technician

Evidence to add

Transfers:Foundations in equipment maintenance and safety.

Build next:Add HVAC and refrigeration system and refrigerant knowledge.

View career profile

Plumbers and Steamfitters

Evidence to add

Transfers:Foundations in piping and tools.

Build next:Add piping system knowledge and licensure requirements.

View career profile

Electrician

Evidence to add

Transfers:Electrical and safety foundations.

Build next:Add electrical theory and licensure requirements.

View career profile

Grounds Maintenance Worker

Evidence to add

Transfers:Foundations in on-site work and tools.

Build next:Add grounds care and equipment knowledge.

View career profile

FAQs and boundaries

What are daily work and hours like?

This page covers O*NET 49-9071.00 general maintenance and repair workers: using two or more maintenance or craft skills to keep equipment and buildings usable. Work includes preventive maintenance, inspection and testing, fault diagnosis, dismantling and part replacement, adjustment and calibration and new equipment installation, piping, electrical and mechanical installation and repair, machining and welding, repairs to doors, windows, floors, and wooden structures, part ordering, and maintenance cost records. Work mainly involves on-site maintenance and repair indoors and outdoors. The role differs from specialist jobs such as industrial machinery mechanics, machinery maintenance workers, HVAC and refrigeration technicians, plumbers, and electricians.

How does this occupation differ from adjacent occupations?

Machinery maintenance workers perform routine care of production equipment; industrial machinery mechanics conduct in-depth diagnosis and repair of industrial machinery; HVAC and refrigeration technicians handle HVAC and refrigeration equipment; plumbers and electricians perform specialized piping and electrical system work, often requiring licenses. General maintenance and repair workers cover equipment and building maintenance across trades. Compare work scope, specialist depth, and authorization boundaries to distinguish them.

What signals suggest I might be a good fit?

Observable signals include systematic diagnosis and hands-on repairs, tool and test equipment use, compliance with energy isolation and safety procedures, and documentation and collaboration. The O*NET interest code RC describes activity preferences only and cannot determine competence or qualifications.

How might AI affect this occupation?

Computerized maintenance management systems (CMMS), fault prediction, and record summary tools may assist scheduling, maintenance interval reminders, and data summaries. People remain responsible for on-site inspection and diagnosis, energy isolation, dismantling and replacement, calibration and acceptance, and safety judgments. This page presents tool uses only as task hypotheses and does not imply widespread organizational adoption.

Which judgments must remain human responsibilities?

Human responsibilities include checking work orders and safety conditions, isolating energy, determining root causes, calibrating and accepting work, identifying work beyond authorization, and truthfully recording and reporting abnormalities.

Source: FermatMind|Global task level|FermatMind task rubric v2026.09; reviewed 2026-09-25|internal task rubric
What pay evidence is available for mainland China?

Insufficient evidence: National Bureau of Statistics industry wage materials checked for this page did not provide a national occupational median precisely matching this occupation. Failure to obtain it does not prove it has not been published. The page shows broad industry background only: 2025 resident services, repairs, and other services wages of 70,226 yuan per year for urban nonprivate units and 52,059 yuan per year for urban private units, and a national urban nonprivate total of 129,441 yuan per year. These industry or overall averages do not establish that this occupation mainly belongs to that industry or equal its median or starting pay. The Ministry of Human Resources and Social Security enterprise remuneration survey information remains a lookup entry point.

What is the US pay evidence?

O*NET's national wages page reports 2025 annual pay at the 10th/50th/90th percentiles for occupation 49-9071.00 of 35,350/49,590/77,180 dollars, with hourly percentiles of 17.00/23.84/37.11 dollars. Percentiles describe the US national pay distribution, not seniority grades, starting pay, or individual take-home income.

What are the entry and training paths?

In the US, this occupation falls within Job Zone 3. Vocational school training, related on-the-job experience or an associate degree, and one to two years of training including apprenticeships are general preparation clues, not uniform thresholds for all jobs. Specialist electrical, plumbing, and HVAC / refrigeration work requires separate checks of local and task-specific licenses or qualifications. In mainland China, this page has not established a unified qualification entry precisely matching this O*NET occupation. Check actual tasks, location, and employer requirements; failure to establish a mapping does not imply no requirements.

What are the main risks and control boundaries?

Main risks include energy isolation and mechanical injury, work at height and in confined spaces, electrical and energized equipment, tool and chemical use, and authorization boundaries across trades. Controls include energy isolation and lockout/tagout, following work at height and protection procedures, dividing work by authorization, and handing over tasks beyond scope. Check specific rules against employer requirements and applicable regulations.

How should market signals be interpreted?

BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring. These are occupational statistics, not individual hiring probabilities.

Is this occupation worth exploring further?

If you can diagnose systematically, perform hands-on repairs, and follow safety procedures, it is worth a low-cost exercise using an entirely fictional repair work order. Moving into specialist electrical, HVAC, or machinery repair trades, or facility management, requires corresponding licenses and evidence of experience and responsibility.

What are the page's usage boundaries?

Evidence for China, the US, and specific organizations is presented separately: conclusions on pay, employment, qualifications / licensure, safety, and AI must not be spliced across scopes. This general maintenance and repair worker page provides occupational assessment and repair exercise information and does not replace local law, safety procedures, or other professional advice. Any statement of insufficient evidence means only that bounded searches did not establish safely matched data; proxies or memory are not used to fabricate figures.

Sources

FermatMind research workflow

2025 BLS OEWS pay data; accessed 2026-09-25

O*NET 49-9071.00 National Wages (BLS OEWS display)

  • O*NET 49-9071.00 General Maintenance and Repair Workers (Summary)O*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation summary
    View original source:O*NET 49-9071.00 General Maintenance and Repair Workers (Summary)
    • Provides occupational identity, official description, interest code, Job Zone, skills, and knowledge for 49-9071.00.
    • Pay and employment data on that page cover this occupation, 49-9071.00.

    Limitations:Applies only to 49-9071.00 and the US market; no mapping to China is established.

  • O*NET 49-9071.00 TasksO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation task list
    View original source:O*NET 49-9071.00 Tasks
    • Provides tasks including preventive and routine maintenance, inspection and testing, fault diagnosis, dismantling and part replacement, adjustment and calibration, new equipment installation, machining and welding, building structure repairs, ordering and estimating, documentation, and training.
    • The task sample does not imply that every job performs all tasks.

    Limitations:The task sample does not imply that every job performs all tasks; no mapping to China is established.

  • O*NET 49-9071.00 Work ContextO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation profile
    View original source:O*NET 49-9071.00 Work Context
    • Describes work context including indoor and outdoor work, standing and bending, tool and equipment use, hazardous equipment and noise exposure, accuracy, and time pressure.
    • US work context does not replace Chinese law or employer procedures.

    Limitations:US work context does not replace Chinese law or employer procedures.

  • O*NET 49-9071.00 National Wages (BLS OEWS display)O*NET OnLine using U.S. Bureau of Labor Statistics data|United States|2025 BLS OEWS pay data; accessed 2026-09-25|O*NET display of BLS OEWS wage data
    View original source:O*NET 49-9071.00 National Wages (BLS OEWS display)
    • 2025 BLS OEWS national wage table for occupation 49-9071.00; both annual and hourly pay are reported at the 10th/25th/50th/75th/90th percentiles.
    • This page selects the 10th/50th/90th percentiles of 35,350/49,590/77,180 dollars per year and 17.00/23.84/37.11 dollars per hour. Hourly values come directly from the original table, not estimates based on individual working hours.

    Limitations:National occupational pay distributions do not represent regions, employers, seniority grades, starting pay, or individual take-home income.

  • U.S. BLS Table 1.2: Occupational projectionsU.S. Bureau of Labor Statistics|United States|2025–2035|official employment data
    View original source:U.S. BLS Table 1.2: Occupational projections
    • BLS Table 1.2 for 49-9071: about 1,621,800 U.S. jobs in 2025, about 1,690,500 projected in 2035 (+4.2%), and about 148,700 annual openings including replacements.

    Limitations:Projections do not guarantee hiring; average growth does not mean individual opportunities necessarily increase.

  • Industries: 49-9071.00O*NET OnLine, U.S. Department of Labor|United States|O*NET industry data current 2026; accessed 2026-09-25|official industry distribution
    View original source:Industries: 49-9071.00
    • The page lists Real Estate and Rental and Leasing and Manufacturing as the main industries in 2024.
    • Industry distribution signals employer settings, not projected growth or demand.

    Limitations:Industry distribution signals employer settings, not projected growth or demand.

  • O*NET 49-9071.00 Education and Job PreparationO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation profile
    View original source:O*NET 49-9071.00 Education and Job Preparation
    • Job Zone 3, medium preparation: most jobs require vocational school training, related on-the-job experience, or an associate degree, plus one to two years of training including apprenticeships.
    • The education distribution does not establish a mandatory requirement for every employer.

    Limitations:The education distribution does not establish a mandatory requirement for every employer; no mapping to China is established.

  • National Certifications: 49-9071.00O*NET OnLine, U.S. Department of Labor|United States|current page; accessed 2026-09-25|official certification directory
    View original source:National Certifications: 49-9071.00
    • US national certification lookup provided by O*NET.
    • Certificates and training do not establish practice authorization or employer hiring requirements.

    Limitations:Certification and training do not establish scope of practice or employer hiring; check the applicable jurisdiction.

  • market_signalInternational Labour Organization|Global task research|ILO Working Paper 140, 2025; accessed 2026-09-25|official research report
    View original source:market_signal
    • Assesses occupational exposure to generative AI at the task level for task-level discussion.
    • An exposure index does not equal adoption rates, job outcomes, or hiring probabilities.

    Limitations:Task exposure does not establish implemented automation, adoption rates, or layoffs; individual outcomes are not inferred.

  • Average Annual Wages of Employees in Urban Units in 2025National Bureau of Statistics|Mainland China national scope|2025 wages; published 2026-05-15; accessed 2026-09-25|official industry wage statistics
    View original source:Average Annual Wages of Employees in Urban Units in 2025
    • Provides average annual wages by industry category for urban nonprivate and private units, including resident services, repairs, and other services, to check China's public wage statistics.
    • Industry averages are not occupational medians and exclude individual businesses and freelancers.

    Limitations:Industry averages are not occupational medians and exclude individual businesses and freelancers; no national wage distribution matching the precise occupation has been established.

  • Enterprise Remuneration Survey Information (2024)Ministry of Human Resources and Social Security|Urban enterprises in mainland China|2024 reference year; published 2025-06; accessed 2026-09-25|official enterprise wage survey
    View original source:Enterprise Remuneration Survey Information (2024)
    • Ministry of Human Resources and Social Security enterprise remuneration survey information: a pay lookup organized by occupation / position.
    • Covers urban enterprises, excluding government agencies and public institutions; this page did not obtain an entry precisely matching 49-9071.00.

    Limitations:Covers urban enterprises, excluding government agencies and public institutions; this page did not obtain an entry precisely matching this occupation and does not use it as a national median.

  • FermatMind Task Impact Scale for General Maintenance and Repair WorkersFermatMind|Global task level|FermatMind task rubric v2026.09; reviewed 2026-09-25|internal task rubric
    • Organizes tasks that tools may assist and human control points for task-level AI and fit discussion.
    • The editorial scale is not evidence of adoption rates, layoffs, regulations, or credentials.

    Limitations:The editorial scale is not evidence of adoption rates, layoffs, regulations, or credentials.

  • BLS: General Maintenance and Repair Workers Occupational HandbookBLS|United States|Current webpage; accessed this round on 2026-10-11|official occupation guidance
    View original source:BLS: General Maintenance and Repair Workers Occupational Handbook
    • How to Become One describes high school or equivalent and on-the-job learning, with possible apprenticeship / training routes, distinct from general Job Zone group durations.
    • US materials do not replace Chinese law or target employer equipment authorization.
    • Pay table: May 2025 median annual pay by industry for this occupation: manufacturing 61500, government excluding state / local education and hospitals 51160, education 50270, real estate and rental and leasing 48360, and accommodation and food services 39590 dollars.

    Limitations:Preparation and safety materials do not confer individual work authority or establish Chinese qualifications.

  • OSHA: Control of Hazardous EnergyOSHA|United States|Current webpage; accessed this round on 2026-10-11|official safety guidance
    View original source:OSHA: Control of Hazardous Energy
    • Machine maintenance and blockage clearing require control of unexpected startup and stored energy release. Distinguish trained authorized employees from affected employees.
    • US materials do not replace Chinese law or target employer equipment authorization.

    Limitations:Preparation and safety materials do not confer individual work authority or establish Chinese qualifications.

  • OSHA: Confined SpacesOSHA|United States|Current webpage; accessed this round on 2026-10-11|official safety guidance
    View original source:OSHA: Confined Spaces
    • A confined space cannot be identified solely by its cramped appearance. Hazard assessment, entry conditions, permits, and rescue must follow applicable procedures.
    • US materials do not replace Chinese law or target employer equipment authorization.

    Limitations:Preparation and safety materials do not confer individual work authority or establish Chinese qualifications.

  • OSHA: Fall ProtectionOSHA|United States|Current webpage; accessed 2026-10-11|official safety guidance
    View original source:OSHA: Fall Protection
    • Elevated platforms and openings require protection appropriate to the work setting, protective equipment, and hazard training. Do not apply US thresholds across jurisdictions.

    Limitations:US materials do not confer individual work authority or replace applicable Chinese rules and on-site authorization.

  • Three representative core tasks of this occupationFermatMind / 费马测试|2026-10-18|Editorial model estimation method
    View original source:Three representative core tasks of this occupation
    • Model impact index for three equally weighted representative core tasks; not a measured share of working time or a job-loss probability. floor((75+50+0)/3+0.5)=42; fermatmind-ai-impact-v1; 2026-10-18.
    • Anchors: 0 negligible; 25 preparation or record assistance; 50 substantial assistance; 75 most information output can be formed by AI with review; 100 almost all of the selected task can be done by AI and independently verified.
    • Scheduling and maintenance interval management — 75/100; weight=1/3; display.ai_impact_table.task_rows.0[0]
    • Inspection, testing, and fault diagnosis — 50/100; weight=1/3; display.ai_impact_table.task_rows.1[0]
    • Isolate energy and replace parts — 0/100; weight=1/3; display.ai_impact_table.task_rows.2[0]

    Limitations:Editorial ratings use the existing occupational responsibilities and AI task analysis on this page. They are not adoption rates, measured effects, job-disappearance or personal-unemployment probabilities, or official scores from Stanford or another external institution. No measured time weights or future robot deployment are assumed.

  • U.S. BLS Table 1.2: Occupational projectionsU.S. Bureau of Labor Statistics|United States|2025–2035
    View original source:U.S. BLS Table 1.2: Occupational projections
    • BLS Table 1.2: U.S. occupation 49-9071 had about 1,621,800 jobs in 2025 and is projected to have about 1,690,500 in 2035 (+4.2%), with about 148,700 openings per year. Counts are rounded independently; projected openings include replacements and do not measure current hiring.

Pay and jobs use the U.S. occupational scope; projections do not measure current recruitment or individual outcomes.

General Maintenance Worker: Site Checks, Work Orders and Handoffs | FermatMind