Preparing content…

Machine Feeders and Offbearers

SOC 53-7063 · O*NET 53-7063.00

Machine Feeders and OffbearersWages and projections use separate tablesChina occupational wage distribution unavailable
N/AAI tools and human review

Machine feeders and offbearers supply material to equipment or remove processed items. They check identifiers and counts, then hand off mismatches, jams and holds under site procedures.

USD 41,220/yearU.S. median annual wage (May 2025)O*NET OnLine using U.S. Bureau of Labor Statistics data
−13.1%U.S. projected employment change (2025–2035)U.S. Bureau of Labor Statistics
About 41,800 jobsU.S. employment (2025)U.S. Bureau of Labor Statistics
About 4,000 per yearU.S. annual openings (2025–2035)U.S. Bureau of Labor Statistics
No data availableMainland China pay reference

Quick assessment

Who is suited to work as a machine feeder or offbearer?

Machine feeders and offbearers load and remove materials under procedures while ensuring quantity, quality, and safety: inspecting materials and products for defects, recording production quantities and operating data, starting, stopping, and adjusting equipment, weighing and measuring, labeling materials, cleaning and maintaining equipment and work areas, and using hand tools, handling devices, and industrial vehicles for feeding, transfer, packaging, and stacking.

The following judgments concern how machine feeders and offbearers operate equipment on site. They do not predict hiring, qualifications, authorization, or contract outcomes.

Who is more likely to fit Machine Feeders and Offbearers?

Sample output and reflection: check whether work instructions and safety conditions were verified first, inspections followed specifications and records were truthful, and equipment anomalies prompted stopping before reporting. Then ask yourself whether you can remain focused and accurate during prolonged repetitive work and accept responsibility for production records and safety handling.

When should you be cautious about choosing Machine Feeders and Offbearers?

This is a review of an entirely fictional production-line scenario, not a personality diagnosis, hiring conclusion, or qualification assessment.

How can a small experiment test your fit for Machine Feeders and Offbearers?

Find “Shift M: Material counts and holds” under “Entering the field, qualifications, and career development.”

Career profile

Machine feeders and offbearers supply material to equipment or remove processed items. They check identifiers and counts, then hand off mismatches, jams and holds under site procedures.

Quick career answers

What should be checked first in this job?

Check first: work instructions and specifications, equipment startup and shutdown and safety procedures, material and product inspection standards, measuring and recording requirements, hazardous equipment and protection requirements, and anomaly stopping and reporting paths.

Objects:

  1. 01Materials, equipment, and production lines

Inputs:

  1. 01Work instructions, specifications, and safety procedures
DeliverablesReviewable production and anomaly records

How can the full work cycle be assessed?

Work cycle: start with verifying work instructions and inspecting materials, proceed through feeding and equipment startup and shutdown, monitoring and sampling, removal, weighing and labeling, transfer, packaging and stacking, then cleaning, maintenance, and records. Do not continue until abnormal safety conditions or equipment status are checked and confirmed.

DimensionPrimary trackComparison track
Work cycleFrom verifying instructions to cleaning and records
Step oneVerify work instructions and inspect materials
Step twoFeed materials and start or stop equipment under procedures
Step threeMonitor operation and sample for inspection
Step fourRemove, weigh, and label materials
Step fiveTransfer, package, and stack
Step sixClean, maintain, and record anomalies

Core responsibilities

  1. 01

    Inspect materials and products for defects, and to ensure conformance to specifications.

  2. 02

    Record production and operational data, such as amount of materials processed.

  3. 03

    Push dual control buttons and move controls to start, stop, or adjust machinery and equipment.

  4. 04

    Weigh or measure materials or products to ensure conformance to specifications.

What are the qualification boundaries?

In the United States, this occupation falls in Job Zone 1-2. A high school diploma or equivalent is typically required, although some positions impose no requirement. Internal training does not equal special-equipment operating qualifications. This page does not assess individual eligibility.

  1. Boundary

    Verify against the position and safety procedures

  2. Jurisdiction

    Follow the rules of the relevant country or region

  3. Institution

    Confirm employer and regulator requirements

  4. Training

    Confirm on-the-job and safety training requirements

  5. Responsibility

    Confirmed by the site lead

  6. Evidence

    Retain reviewable records

Work reality

Key judgments: whether materials or products meet specifications, equipment runs normally, when shutdown and reporting are required, how to maintain the work cycle safely, and which anomalies require stopping rather than continuing to handle them.

O*NET structured fields

Research inputs
Research inputs
O*NET 53-7063.00 describes this occupation’s tasks and work context. U.S. wages come from OEWS and projections from BLS Table 1.2.

Machine Feeders and Offbearers' Work Objects and AI Boundaries Editorial trial candidate: aggregate and verify fictional material specifications, measurement data, and anomaly records. Machine vision, sensors, and equipment monitoring do not equal occupational generative AI adoption. Tool prompts cannot replace quality judgments, safety interlocks, or approved handling procedures.

Career direction comparison

Comparison with adjacent occupations

The following compares machine feeders and offbearers and adjacent roles by actual work objects, core deliverables, and responsibility boundaries. Titles do not make qualifications interchangeable.

Comparison with adjacent occupations
Career directionCore work and outputKey differencesBest-fit choice
Conveyor Operators and TendersConveyor operators and tenders run and tend conveying systems. Machine feeders and offbearers focus on loading, removal, and material handling at individual machines or lines. They often collaborate on production lines but have different duties.Run and tend conveying systems.Compare if you prefer operating and tending systems.
Industrial Truck OperatorsIndustrial truck operators use vehicles to move and stack materials. Machine feeders and offbearers focus on feeding and removal, inspections, and records; vehicle operation is only one part of their handling work.Handle vehicle-based material movement and stacking.Compare if you prefer vehicle operation.
Packers and Packagers, HandHand packers and packagers focus on manual packaging and sealing. Machine feeders and offbearers mainly feed and remove materials from equipment and handle materials; packaging and stacking are only part of their output stages.Focus on manual packaging and sealing.Compare if you prefer manual packaging.
Production Helpers and Team AssemblersProduction helpers clean sites, move materials, and assist operations; team assemblers assemble components. Machine feeders and offbearers focus on feeding and removal and monitoring machine and equipment operation, with different duties and outputs.Provide on-site assistance or component assembly.Compare if you prefer assisting operations or assembly.

How to choose

First use reviewable work-record explanations to verify work objects, methods, and safety boundaries, then assess the direction. Do not assign a single ranking based on income or personality.

Next, turn comparison results into small-scale work and safety exercises that can be stopped.

AI impact on this career

Boundaries of AI's impact on machine feeders and offbearers

Editorial trial candidate: aggregate and verify fictional material specifications, measurement data, and anomaly records. Machine vision, sensors, and equipment monitoring do not equal occupational generative AI adoption. Tool prompts cannot replace quality judgments, safety interlocks, or approved handling procedures.

Technical capabilities

Describe only specific steps tools can assist; do not treat demonstrations as institutional adoption.

Adoption conditions

Check data sources, system reliability, and review responsibility. This page has no adoption rate for the individual occupation.

Job outcomes

Without occupational-level job outcome studies, do not infer layoff timing, staffing changes, or hiring probabilities.

Task impact matrix

Comparison of AI impact across career tasks
Work areaTaskCurrent changeHuman control point
Inspection and measurementInspect materials and weigh and measureEditorial suggestion: tools may assist with defect flags, measurement, and record aggregation. Current materials do not demonstrate widespread adoption of these systems by manufacturing and warehousing companies.Verify specifications and safety conditions.
Feeding and removalEquipment feeding and removalMay assist with equipment monitoringBase decisions on work instructions, safety procedures, and quality requirements, retaining human confirmation and records.
Records and anomaliesRecord production and report anomaliesDo not make automated decisionsJudge and report under procedures.
Cleaning and maintenanceClean and maintain equipment and work areasMay assist with schedulingConfirmed by the site lead.

Why does employment evidence reach different conclusions?

Occupational sources describe the tasks and objects actually handled in this occupation: materials and products, machinery and equipment, measuring and inspection tools, handling devices, production records, and safety procedures. Tool capabilities, organizational adoption, and job outcomes are recorded separately; wage or employment data do not substitute for AI evidence.

O*NET 53-7063.00 Machine Feeders and Offbearers (Summary)

View source ↗
Subject
Identity and scope of 53-7063.00
Finding
Supports identity and task boundaries
Limitation
US scope for this occupation; excludes Chinese data.

O*NET 53-7063.00 (Detailed Profile)

View source ↗
Subject
Tasks and work context of 53-7063.00
Finding
Supports task breakdown, not AI adoption rates
Limitation
Does not replace local laws or employer procedures.

O*NET 53-7063.00 National Employment Trends

View source ↗
Subject
53-7063.00 employment projections
Finding
Supports 2025—2035 occupational employment projections, not AI causation
Limitation
Projections are not individual hiring probabilities.

Why does impact differ by work direction?

Editorial task breakdown: the assistance steps above are candidates for validation. This round obtained neither a ranking of automation difficulty across steps nor evidence of actual adoption outcomes. On-site judgment and authorized responsibilities require confirmation by the personnel responsible for the role.

Inspection and measurement

AI primarily changesEditorial candidates for validation: defect flags and aggregation

Human responsibility remainsSpecification and safety checks

Records and anomalies

AI primarily changesEditorial candidate for validation: data aggregation

Human responsibility remainsAnomaly judgment and reporting

Accountability must remain intact when AI enters professional workflows

Human control points are confirming work instructions and safety conditions, inspecting and recording under specifications, stopping and reporting equipment or material anomalies, and taking responsibility for production and safety records.

  1. Verify inputs

    Confirm work instructions, specifications, and safety conditions.

  2. Limit the task

    Operate only within authorization and procedures.

  3. Human review

    Review materials, measurements, and equipment status.

  4. Record and escalate

    Stop immediately and report equipment or material anomalies.

Professional risks of using AI

Equipment operation injuries

May cause personal injury.

Control: Start and stop under procedures and wear protection.

Material or product mix-ups

May cause quality incidents and rework.

Control: Verify labels and specifications before operation.

Failure to stop for anomalies

May worsen equipment and safety problems.

Control: Stop on anomalies and report through the designated path.

How should different audiences respond?

New entrants

Practice inspections, records, and safety procedures.

Current workers

Retain production and anomaly records.

Managers

Establish safety conditions and reporting paths first.

Common questions about AI and career development

Will AI replace machine feeders and offbearers?

Task exposure, adoption, and job outcomes are different things to measure; they cannot establish dates for job cuts.

Source: O*NET 53-7063.00 Work ContextOriginal source ↗

Which steps could be tested in controlled trials with digital tools?

Editorial trial candidate: aggregate and verify fictional material specifications, measurement data, and anomaly records. Machine vision, sensors, and equipment monitoring do not equal occupational generative AI adoption. Tool prompts cannot replace quality judgments, safety interlocks, or approved handling procedures.

Source: O*NET 53-7063.00 (Detailed Profile)Original source ↗

Does this page have adoption-rate data?

Insufficient evidence: this round obtained no AI adoption rate, time-saving data, or causal employment study for this occupation.

Source: O*NET 53-7063.00 (Detailed Profile)Original source ↗

First conduct offline exercises using entirely fictional production-line scenarios, recording inspections, feeding and removal, equipment anomalies, and reporting boundaries. Do not let unverified automatic detection replace human confirmation.

Chinese mainland salary reference

This round did not establish separate Chinese wages for this occupation. NBS2025 manufacturing figures of 113594 / 76055 yuan and transportation, storage, and postal services figures of 133981 / 73133 yuan are only industry proxies for related businesses, not occupational medians, starting pay, or take-home pay.

Statistical scope: National Bureau of Statistics 2025 average annual wages by industry category were 113,594 yuan per year for urban non-private manufacturing units and 76,055 yuan per year for urban private units; 133,981 yuan per year for urban non-private transportation, storage, and postal services units and 73,133 yuan per year for urban private units. The nationwide total for urban non-private units was 129,441 yuan per year. All are industry-level statistics, not this occupation's median or starting pay.

Official statistical scope

Category boundary: the Ministry of Human Resources and Social Security publishes enterprise compensation survey information by occupation / position, which can be used to look up related production and warehousing pay. This page did not obtain an entry matching O*NET 53-7063.00 exactly and does not treat it as this occupation's national median. Refer to competent authorities' publications for specifics.

Nationwide · manufacturing (non-private)

Only average annual wages are published

Nationwide · transportation, storage, and postal services (non-private)

Only average annual wages are published

Exact wages for this occupation

Insufficient evidence: not separately listed

Scenario-based reference

Insufficient evidence: this round did not establish a separate wage match for this occupation. The industry averages below are broad proxies, not occupational medians, starting pay, or take-home income.

This scenario illustrates statistical scope only and is not a personal pay quote.
Position scopeReference valueExplanation
Not separately measuredAccording to employer and position appointmentsNational Bureau of Statistics wage statistics are organized by industry and registration type, not educational tiers within this occupation.
Not separately measuredAccording to employer and position appointmentsNational Bureau of Statistics wage statistics are organized by industry and registration type, not educational tiers within this occupation.
Not separately measuredAccording to employer and position appointmentsNational Bureau of Statistics wage statistics are organized by industry and registration type, not educational tiers within this occupation.
Not separately measuredAccording to employer and position appointmentsNational Bureau of Statistics wage statistics are organized by industry and registration type, not educational tiers within this occupation.

Influencing factors

Manufacturing (non-private)

113,594 yuan per year

Manufacturing (private)

76,055 yuan per year

Transportation, storage, and postal services (non-private)

133,981 yuan per year

Boundaries for AI and pay judgments

Insufficient evidence: no nationwide occupational median wage, statistical period, or definition corresponding to machine feeders and offbearers in mainland China was obtained. This page shows only industry proxies labeled as industry-level data; it does not fill the gap with proxy figures or US figures.

U.S. salary reference

O*NET displays the May 2025 BLS OEWS national wages for U.S. occupation 53-7063.

The May 2025 U.S. national median was USD 41,220 a year and USD 19.82 an hour. The annual 10th, 25th, 50th, 75th and 90th percentiles were USD 32,220, 36,420, 41,220, 48,480, 58,160.

2025 published nationwide occupational wage percentiles are not starting pay or take-home income. Occupational decline does not establish individual unemployment.

2025 published nationwide occupational wage percentiles are not starting pay or take-home income. Occupational decline does not establish individual unemployment.
PercentileAnnual referenceHourly equivalentExplanation
10th percentile$32,220 per year$15.49 per hour2025 published nationwide occupational percentile boundary, not a personal pay quote.
Median (50%)$41,220 per year$19.82 per hour2025 nationwide US median annual wage (this occupation, 53-7063.00).
90th percentile$58,160 per year$27.96 per hour2025 published nationwide occupational percentile boundary, not a personal pay quote.

Pay · median:$41,220 per year (2025);O*NET 53-7063.00 National Wages (BLS OEWS Display)

Pay · hourly median:$19.82 per hour (2025);O*NET 53-7063.00 National Wages (BLS OEWS Display)

Pay · 10th percentile:$32,220 per year (2025);O*NET 53-7063.00 National Wages (BLS OEWS Display)

Pay · 90th percentile:$58,160 per year (2025);O*NET 53-7063.00 National Wages (BLS OEWS Display)

Pay · statistical scope:Machine Feeders and Offbearers(53-7063.00);O*NET 53-7063.00 National Wages (BLS OEWS Display)

Nationwide 10th / 25th / 50th / 75th / 90th percentiles are 32220 / 36420 / 41220 / 48480 / 58160 US dollars, not entry-level or senior grades or educational tiers. Percentiles cannot isolate experience, regional, or other effects.

Wages

2025 published nationwide US occupational percentiles, not take-home or starting pay.

Employment

Employment count in 2025, not currently advertised positions.

Outlook

-13% growth over 2025—2035; establishes neither individual hiring probabilities nor AI causation.

Industry

Listed as manufacturing and transportation and warehousing under O*NET / BLS industry definitions, not the income of all workers.

O*NET2025 employment industries: manufacturing 70%, transportation and warehousing 15%. These describe US employer settings, not China's main industries, wages, or hiring demand.

O*NET2025 employment industries: manufacturing 70%, transportation and warehousing 15%. These describe US employer settings, not China's main industries, wages, or hiring demand.
IndustryIndustry valueHow to interpret
ManufacturingNot separately listedInsufficient evidence: this round obtained no wage subtable for this occupation by industry. Overall percentiles cannot stand in for industry-specific median wages.
Transportation and WarehousingNot separately listedInsufficient evidence: this round obtained no wage subtable for this occupation by industry. Overall percentiles cannot stand in for industry-specific median wages.
Industry scope note oneSee employment rowInsufficient evidence: this round obtained no wage subtable for this occupation by industry. Overall percentiles cannot stand in for industry-specific median wages.
Industry scope note twoSee employment rowInsufficient evidence: this round obtained no wage subtable for this occupation by industry. Overall percentiles cannot stand in for industry-specific median wages.

Employment in 2025: 41,800; growth over 2025—2035: -13%. Average annual openings of 4,000 include replacements and are neither currently advertised positions nor annual net additions. They do not establish individual opportunity or AI causation.

Qualifications

73% needing high school for new entry is a survey opinion, not a uniform threshold. Verify machine-model authorization and repair authority separately.

Experience

Editorial suggestion: demonstrate target-material work orders, specification verification, measurement records, and anomaly handovers. No comparative study shows site experience is superior to credentials. Verify machine operation and repair authority separately.

Location

Verify employer and regional conditions for each position. Nationwide percentiles do not estimate income effects of manufacturing or logistics locations.

Employment outlook and job openings

Fit signals

Fit signals: start with observable work behavior

To assess fit, first consider whether you can remain focused and accurate through prolonged repetitive operations, inspect and record under procedures, stop before reporting equipment anomalies, and work on site under safety requirements. Tools such as RIASEC can only suggest hypotheses; they cannot replace real task experience.

Positive signals: Positive signals: verifying materials and specifications under standards, recording production and anomalies truthfully, cooperating with teams and following safety procedures, and maintaining steady output during repetitive work.

Conditions for caution: Conditions for caution: difficulty with prolonged repetitive operation, unwillingness to verify specifications and records, a tendency to keep working through equipment anomalies, or inability to follow safety procedures and wear protection.

Trial action: Trial action: use an entirely fictional production-line scenario to practice material inspections, feeding and removal steps, production records, and stopping and reporting equipment anomalies. Ask another person to review the records.

Do not let one test decide your career

RIASEC

Work sample

Check with work samples rather than replacing judgment with labels.

The RIASEC interest code is RC (Realistic—Conventional): a preference for hands-on equipment operation and repetitive tasks under procedures. These labels describe activity preferences only; they cannot determine competence or qualifications.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

Big Five personality

Work sample

Check with work samples rather than replacing judgment with labels.

This round obtained no personality validity studies for machine feeders and offbearers. Use fictional work orders, measurement data, and anomaly handovers to observe record verification. Do not test real machines or use scales to judge safety fitness.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

MBTI

Work sample

Check with work samples rather than replacing judgment with labels.

Type tools such as MBTI and the Enneagram cannot determine competence or qualifications; they may only support self-reflection.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

Enneagram

Work sample

Check with work samples rather than replacing judgment with labels.

Further verification requires real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

Cognitive ability

Work sample

Check with work samples rather than replacing judgment with labels.

Further verification requires real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

Emotional ability

Work sample

Check with work samples rather than replacing judgment with labels.

Further verification requires real tasks, safety boundaries, and reviewable deliverables.

  • Observable tasks
  • Process records

Do not use it this way: These cannot establish hiring, qualifications, or performance.

Start a career interest trial

Which machine feeding and offbearing direction might suit you better?

Equipment feeding

Fits better when: Able to feed materials steadily under procedures.

Watch for: Must verify safety conditions and protection.

Removal and transfer

Fits better when: Able to remove and handle materials at the required pace.

Watch for: Must verify labels and routes.

Inspection and measurement

Fits better when: Able to inspect and weigh under specifications.

Watch for: Must record truthfully and review.

Equipment cleaning and maintenance

Fits better when: Able to clean and inspect according to plans.

Watch for: Must shut down for work under procedures.

Packaging and stacking

Fits better when: Able to package and stack under specifications.

Watch for: Must verify labels and quantities.

Anomaly reporting

Fits better when: Able to identify and report anomalies immediately.

Watch for: Must not continue operating with faults.

Career fit questions

How can I identify the work focus in a job posting?

Feeding keeps the line supplied and checks materials against specifications. Offbearing receives output, separates exceptions, and records quantities. Compare machine-paced input with output checks and ask who can stop a handoff.

What should I ask in an interview?

If material falls outside specification, should I stop the handoff or mark it for review?

Can you perform repetitive operations for long periods?

Use this page's work sample to check focus and accuracy during repetitive work.

Can you wear protection under procedures?

Check protection and operation against position safety requirements.

How do you respond to material anomalies?

Isolate first, verify specifications, then report.

What would you do if equipment alarmed?

Respond and report under the machine's approved alarm procedures. Do not independently clear blockages or bypass interlocks.

Can you accept on-site work and shifts?

Assess your ability to adapt to site work and shifts.

Can you accept recordkeeping responsibility?

Assess your acceptance of production and anomaly records.

How can your work be reviewed?

Enable others to review work and anomaly records.

What trial should you try next?

Practice paper records using fictional work orders and anomaly information only. Do not operate real machines.

Risks and boundaries

Machine Feeders and Offbearers' Work Risks and Boundaries

Risks must be handled in terms of triggers, consequences, controls, and escalation boundaries.

Machinery, mix-ups, records, repetitive movements, environments, and anomaly scenarios are editorial risks, not accident rates or operating instructions. Verify equipment protection and hazardous-energy control for servicing and blockage clearing against approved procedures and authorization. US 1910.147 scope and exceptions cannot extend to all work.

01

Equipment and mechanical injury risks

Typical scenario:When equipment is started or stopped outside procedures or protection is not worn.

Roles most affected:Equipment operating positions

Possible consequence:May cause mechanical injuries.

How to reduce risk:Operate under approved procedures and protective requirements. Servicing and blockage clearing require separate energy-control and authorization checks. Pressing a stop button is not energy isolation. Do not bypass guards.

Evidence:O*NET 53-7063.00 Work Context

02

Material and product mix-up risks

Typical scenario:When materials are fed without checking labels or specifications.

Roles most affected:Feeding and removal positions

Possible consequence:May cause material mix-ups and quality incidents.

How to reduce risk:Verify labels, specifications, and work orders before operation.

Evidence:O*NET 53-7063.00 Tasks

03

Record and quantity discrepancy risks

Typical scenario:When measurements or records are inaccurate.

Roles most affected:Inspection and recordkeeping positions

Possible consequence:May cause quantity discrepancies and traceability difficulties.

How to reduce risk:Measure under procedures and record truthfully.

Evidence:O*NET 53-7063.00 Tasks

04

Repetitive-strain risks

Typical scenario:When movements are repeated for long periods or posture is poor.

Roles most affected:On-site operating positions

Possible consequence:May cause repetitive strain.

How to reduce risk:Rotate according to ergonomic requirements and maintain proper posture.

Evidence:O*NET 53-7063.00 Work Context

05

Hazardous-environment exposure risks

Typical scenario:When work around hazardous equipment or environments does not follow protective requirements.

Roles most affected:On-site operating positions

Possible consequence:May cause personal injury.

How to reduce risk:Follow protective and work-permit requirements.

Evidence:O*NET 53-7063.00 Work Context

06

Handling equipment or material anomalies without stopping

Typical scenario:When work continues despite equipment alarms or material anomalies.

Roles most affected:Equipment operation and inspection positions

Possible consequence:May worsen equipment and safety problems.

How to reduce risk:Stop relevant hazardous work under the machine's approved alarm and anomaly procedures, report, and refer to authorized personnel. Feeding authority does not equal blockage-clearing or repair authorization.

Evidence:O*NET 53-7063.00 Tasks

Entry paths

Entry paths and capability stages

BLS lists no formal educational credential and short-term on-the-job training as typical preparation. Verify equipment scope, supervision and who can handle exceptions.

Production-line feeding, removal, and equipment operation

01

Operator / trainee

Typical scope:Entry stage: practice material inspections, feeding and removal, measurement records, and equipment cleaning and maintenance under supervision, learn work instructions and safety procedures, and retain process records.

Readiness evidence:Paper exercise “Shift M: Material counts and holds.” Fictional shift V2 records 24 pieces in lot A: 18 cleared outputs, 4 pending inspection and 2 damaged. Lot B is on hold because its material ID is unverified. The old log says 22 are ready. Recount ready pieces and list handoff items. In the variant, move only one pending piece to verified and passing.

Credential boundary:Verify on-the-job training and safety requirements.

Next moves:Complete both cases and save your first draft. Then open “Paper exercise answer key (open after completing)” in “Frequently asked questions and sources.” Check whether someone can trace the original values, pending items and handoff owner.

02

Machine Feeders and Offbearers

Typical scope:Independently complete feeding, removal, inspections, and records.

Readiness evidence:Retain work and anomaly records.

Credential boundary:Verify position and equipment requirements.

Next moves:Moving toward greater responsibility: with experience, coordinate multiple machines or production lines, instruct new workers, and contribute to equipment and process improvement, or move into equipment maintenance, quality inspection, and warehousing management.

03

Multiple-machine operation / instruction

Typical scope:Responsible for multiple-machine coordination and instructing new workers.

Readiness evidence:Retain coordination and instruction records.

Credential boundary:Verify company requirements.

Next moves:Add evidence of multiple-machine work and instruction.

04

Team / line leader

Typical scope:Responsible for team assignments and site improvements.

Readiness evidence:Retain team and improvement records.

Credential boundary:Verify company requirements.

Next moves:Add evidence of site management and improvement.

Transition to equipment maintenance

01

Maintenance assistant

Typical scope:Participate in cleaning and inspections under supervision.

Readiness evidence:Retain inspection and maintenance records.

Credential boundary:Verify employer requirements.

Next moves:Build mechanical and electrical foundations.

02

Equipment maintenance worker

Typical scope:Complete servicing and fault handling within verified target repair qualifications, energy-control training, and equipment authorization. Feeding experience does not automatically grant electrical repair authority.

Readiness evidence:Retain servicing and fault records.

Credential boundary:Verify position and equipment requirements.

Next moves:Build fault diagnosis knowledge.

03

Key maintenance specialist

Typical scope:Responsible for specialized maintenance and improvements.

Readiness evidence:Retain specialist-project and improvement records.

Credential boundary:Verify company requirements.

Next moves:Build specialist and project management knowledge.

04

Maintenance supervisor

Typical scope:Responsible for maintenance plans and teams.

Readiness evidence:Retain plan and team records.

Credential boundary:Verify company requirements.

Next moves:Add evidence of management responsibility.

Transition to production-line quality inspection

01

Quality inspection assistant

Typical scope:Verify material labels, dimensions, weights, and batch records under supervision

Readiness evidence:Retain raw measurements, specification versions, and inspection records

Credential boundary:Verify measuring-tool and position training

Next moves:Learn sampling, nonconforming-material isolation, and traceability

02

Production-line quality inspector

Typical scope:Sample, record, and report nonconformities under authorized inspection plans

Readiness evidence:Inspection results, measuring-tool status, and batch traceability

Credential boundary:Verify target-process inspection and sign-off authority

Next moves:Build anomaly remeasurement and cause-verification skills

03

Key quality inspection specialist

Typical scope:Review complex defects and batch anomalies

Readiness evidence:Remeasurement evidence, defect samples, and corrective-action tracking

Credential boundary:Verify review appointment and standards training

Next moves:Build inspection-method consistency and instruction skills

04

Quality inspection lead

Typical scope:Organize inspections, measuring-tool management, and quality-record review

Readiness evidence:Spot-check, calibration, batch-review, and training records

Credential boundary:Verify company inspection-lead authority

Next moves:Build quality planning and cross-department improvement skills

Capability ladder: what demonstrates readiness?

  1. 01

    Verify inputs

    Confirm work instructions, specifications, and safety conditions.

  2. 02

    Process control

    Feed, remove, inspect, and record under procedures, retaining anomaly-handling records.

  3. 03

    Outcome review

    Produce reviewable production and safety records.

  4. 04

    Expanded responsibility

    Expand multiple-machine and team duties within authorization.

Market signals

Market signals and transition directions

BLS Table 1.2 (53-7063) shows about 41,800 U.S. jobs in 2025 and projects 36,300 in 2035 (−13.1%), with about 4,000 openings per year including replacements. Counts are rounded independently.

Three sources, three different measures

Nationwide United States

2025—2035

Nationwide United States · Display scope: Machine Feeders and Offbearers (53-7063.00)

O*NET2025 employment industries: manufacturing 70%, transportation and warehousing 15%. These describe US employer settings, not China's main industries, wages, or hiring demand.

Employment size and growth

Employment size, growth rates, and job openings must be interpreted separately.

Does not establish:Occupational statistics cannot serve as an individual employment guarantee.

Nationwide United States

2025—2035

Nationwide United States · Display scope: Machine Feeders and Offbearers (53-7063.00)

4,000 openings per year (growth and replacement)

Average annual job openings

Average annual growth and replacement openings, not a ten-year total or current vacancies.

Does not establish:Cannot serve as an individual hiring probability.

Nationwide United States

2025

Nationwide United States · Display scope: Machine Feeders and Offbearers (53-7063.00)

$41,220 per year

Median annual wage

BLS 2025 OEWS nationwide median, not starting pay or take-home income.

Does not establish:Published percentiles are not personal take-home or starting pay.

Where can your current capabilities transfer?

These are capability relationships, not automatic promotions or credential waivers.

FAQs and boundaries

What are daily work and working hours like?

Machine feeders and offbearers on this page refers to O*NET 53-7063.00: feeding materials into or removing them from machines and equipment operated by other workers or automated. Work includes material and product defect inspections, production and operating records, equipment startup, shutdown and adjustment, weighing and measuring, material labeling, equipment and work-area cleaning and maintenance, feeding, removal and transfer, packaging and stacking, and opening and closing conveyor gates. Work mainly involves on-site repetitive physical operation, equipment monitoring, and teamwork. Most respondents work about 40 hours per week with limited decision freedom. This is distinct from conveyor operators, industrial truck operators, packagers, production helpers, or team assemblers.

How does this occupation differ from adjacent occupations?

Conveyor operators and tenders run conveying systems; industrial truck operators handle vehicle-based movement and stacking; hand packers and packagers package manually; production helpers clean sites and provide assistance; team assemblers assemble components. Machine feeders and offbearers focus on machine feeding and removal, inspections, and records. Compare equipment, outputs, and safety responsibility to distinguish them.

What signals suggest I might be suited to this work?

Observable signals: verifying materials and specifications under standards, recording production and anomalies truthfully, cooperating with teams and following safety procedures, and maintaining steady output during repetitive work. The O*NET interest code RC describes activity preferences only; it cannot determine competence or qualifications.

How will AI affect this occupation?

Visual inspection, measurement, and equipment monitoring tools may assist with flagging defects and anomalies. However, loading and unloading, equipment startup and shutdown, safety stops, and quality handling remain the responsibility of machine feeders and offbearers under procedures. This page presents tool uses only as task hypotheses, not evidence of widespread institutional adoption.

Which judgments must remain a human responsibility?

Human responsibilities include confirming work instructions and safety conditions, inspecting and measuring under specifications, stopping and reporting equipment or material anomalies, and truthfully recording production and handling processes.

Source: FermatMind|This page|This page|Editorial explanation
What is the pay evidence for mainland China?

The National Bureau of Statistics publishes average annual wages for employed persons in urban units by industry category without listing this occupation separately, so a safely mapped nationwide occupational median cannot be established. This page shows only industry proxies labeled as industry-level data: in 2025, manufacturing paid 113,594 yuan per year in urban non-private units and 76,055 yuan per year in urban private units; transportation, storage, and postal services paid 133,981 yuan per year in urban non-private units and 73,133 yuan per year in urban private units; the nationwide total for urban non-private units was 129,441 yuan per year. None equals this occupation's median or starting pay. Ministry of Human Resources and Social Security enterprise compensation survey information is provided as a lookup entry point.

What is the US pay evidence?

The May 2025 U.S. national median was USD 41,220 a year and USD 19.82 an hour. The annual 10th, 25th, 50th, 75th and 90th percentiles were USD 32,220, 36,420, 41,220, 48,480, 58,160.

What are the entry and training paths?

BLS lists no formal educational credential and short-term on-the-job training as typical preparation. Verify equipment scope, supervision and who can handle exceptions. A Yangjiang listing includes robot-assisted loading and unloading among one employer’s production duties. Ask which tasks the vacancy actually includes.

What are the main risks and control boundaries?

Main risks include equipment and mechanical injuries, material and product mix-ups, record and quantity discrepancies, repetitive strain, and hazardous-environment exposure. Controls include confirming work instructions and safety conditions, inspecting and measuring under specifications, wearing protection, and stopping and reporting anomalies. Verify specific rules against the employer and applicable regulations.

How should market signals be interpreted?

BLS Table 1.2 (53-7063) shows about 41,800 U.S. jobs in 2025 and projects 36,300 in 2035 (−13.1%), with about 4,000 openings per year including replacements. Counts are rounded independently.

Is this occupation worth exploring further?

If you can remain focused through prolonged repetitive operation, inspect and record under procedures, and stop and report anomalies, it is worth using an entirely fictional production-line scenario for a low-cost work and safety exercise. Moving into equipment maintenance, quality inspection, or warehouse management requires corresponding technical skills and evidence of responsibility.

What are the boundaries for using this page?

Evidence for China, the United States, and specific institutions is stated separately: pay, employment, qualifications, safety, and AI conclusions must not be combined across scopes. The machine feeder and offbearer page offers occupational judgment and work exercise information and does not replace local laws, safety procedures, or other professional advice. Any statement of insufficient evidence means only that a bounded search did not establish safely corresponding data; proxies or memory are not used to fabricate figures.

Paper exercise answer key (open after completing)

The original has 18 ready and the variant has 19, leaving 3 pending in the variant. Exclude damaged items and lot B. Lot B remains on hold.

Sources

FermatMind research workflow

2025-05

O*NET 53-7063.00 National Wages (BLS OEWS Display)

  • O*NET 53-7063.00 Machine Feeders and Offbearers (Summary)O*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation summary
    View original source:O*NET 53-7063.00 Machine Feeders and Offbearers (Summary)
    • Provides occupational identity, official description, interest codes, Job Zone, skills, and knowledge for 53-7063.00.
    • Wage and employment data on this page cover this occupation, 53-7063.00.

    Limitations:Applies only to 53-7063.00 and the US market; establishes no Chinese mapping.

  • O*NET 53-7063.00 (Detailed Profile)O*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation detail
    View original source:O*NET 53-7063.00 (Detailed Profile)
    • Provides tasks, work activities, work context, skills, and knowledge details for 53-7063.00.
    • Tasks differ from institutional and employer procedures.

    Limitations:Applies only to 53-7063.00 and the US market; tasks differ from employer procedures.

  • O*NET 53-7063.00 TasksO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation task list
    View original source:O*NET 53-7063.00 Tasks
    • Provides a task list covering material and product defect inspections, production records, equipment startup, shutdown and adjustment, weighing and measuring, material labeling, equipment cleaning and maintenance, feeding and removal, material handling, securing packaging and stacking, conveyor-gate operation, and chemical addition.
    • The task sample does not mean every position performs every task.

    Limitations:The task sample does not mean every position performs every task; it establishes no Chinese mapping.

  • O*NET 53-7063.00 Work ContextO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation profile
    View original source:O*NET 53-7063.00 Work Context
    • Describes repetitive physical activities, hazardous-equipment exposure, teamwork, standing and bending, weekly hours, and decision freedom.
    • US work context does not replace Chinese law or employer procedures.

    Limitations:US work context does not replace Chinese law or employer procedures.

  • O*NET 53-7063.00 National Wages (BLS OEWS Display)O*NET OnLine using U.S. Bureau of Labor Statistics data|United States|2025-05|O*NET display of BLS OEWS wage data
    View original source:O*NET 53-7063.00 National Wages (BLS OEWS Display)
    • The May 2025 U.S. national median was USD 41,220 a year and USD 19.82 an hour. The annual 10th, 25th, 50th, 75th and 90th percentiles were USD 32,220, 36,420, 41,220, 48,480, 58,160.

    Limitations:National occupational distribution. Local wages and individual offers vary.

  • O*NET 53-7063.00 National Employment TrendsO*NET OnLine using U.S. Bureau of Labor Statistics data|United States|Occupational profile or live lookup|official employment data
    View original source:O*NET 53-7063.00 National Employment Trends
    • The employment projections shown here come from BLS Table 1.2.
    • The employment projections shown here come from BLS Table 1.2.

    Limitations:Projections do not guarantee hiring; projected decline does not equal individual unemployment.

  • Industries: 53-7063.00O*NET OnLine, U.S. Department of Labor|United States|O*NET industry data current 2026; accessed 2026-09-25|official industry distribution
    View original source:Industries: 53-7063.00
    • The main industries on this page in 2024 were Manufacturing and Transportation and Warehousing.
    • Industry distribution signals employer settings, not growth or demand projections.

    Limitations:Industry distribution signals employer settings, not growth or demand projections.

  • O*NET 53-7063.00 Education and Job PreparationO*NET OnLine, U.S. Department of Labor|United States|O*NET 2026 occupational profile; accessed 2026-09-25|official occupation profile
    View original source:O*NET 53-7063.00 Education and Job Preparation
    • Job Zone 1-2, requiring little to some preparation. A high school diploma or equivalent is typically required; some positions impose no requirement.
    • The education distribution does not represent mandatory requirements for every employer.

    Limitations:The education distribution does not represent mandatory requirements for every employer; it establishes no Chinese mapping.

  • Hot Technologies: 53-7063.00O*NET OnLine, U.S. Department of Labor|United States|current page; accessed 2026-09-25|official technology list
    View original source:Hot Technologies: 53-7063.00
    • O*NET information on related in-demand technologies / tools.
    • A tool list does not equal job requirements or institutional adoption rates.

    Limitations:A tool list does not equal job requirements or institutional adoption rates.

  • market_signalInternational Labour Organization|Global task research|ILO Working Paper 140, 2025; accessed 2026-09-25|official research report
    View original source:market_signal
    • Assesses occupational exposure to generative AI at task level for task-level discussion.
    • An exposure index is not an adoption rate, job outcome, or hiring probability.

    Limitations:Task exposure does not equal automation deployment, adoption rates, or layoffs. Do not infer individual outcomes.

  • Average Annual Wages of Employed Persons in Urban Units in 2025National Bureau of Statistics|Nationwide mainland China scope|2025 annual wages; published 2026-05-15; accessed 2026-09-25|official industry wage statistics
    View original source:Average Annual Wages of Employed Persons in Urban Units in 2025
    • Provides average annual wages in urban non-private and private units by industry category to verify the scope of public Chinese wage statistics.
    • Industry averages are not occupational medians and exclude individual businesses and freelancers.

    Limitations:Industry averages are not occupational medians and exclude individual businesses and freelancers. No nationwide wage distribution corresponding to the exact occupation has been established.

  • Enterprise Compensation Survey Information (2024)Ministry of Human Resources and Social Security|Urban enterprises in mainland China|2024 annual data; published 2025-06; accessed 2026-09-25|official enterprise wage survey
    View original source:Enterprise Compensation Survey Information (2024)
    • Ministry of Human Resources and Social Security enterprise compensation survey information, a pay lookup entry point classified by occupation / position.
    • Covers urban enterprises, excluding government agencies and public institutions. This page did not obtain an entry matching 53-7063.00 exactly.

    Limitations:Covers urban enterprises, excluding government agencies and public institutions. This page did not obtain an exact match for this occupation and does not treat the data as a nationwide median.

  • Tasks on this pageFermatMind|This page|This page|Editorial explanation
    • Tools may help organize records. Verify key information against the original.
    • Tools may help organize records. Verify key information against the original.

    Limitations:This explanation does not measure adoption or work outcomes.

  • Applicable US equipment servicing and maintenanceOSHA|United States|Current; verified 2026-10-11|official safety standard
    View original source:Applicable US equipment servicing and maintenance
    • Hazardous-energy control and employee training for covered equipment servicing and blockage clearing

    Limitations:Applicable exclusions and exceptions exist. Does not automatically cover all normal production or China and is not a complete procedure

  • 53-7063U.S. Bureau of Labor Statistics|United States|2025–2035
    View original source:53-7063
    • BLS Table 1.2 (53-7063) shows about 41,800 U.S. jobs in 2025 and projects 36,300 in 2035 (−13.1%), with about 4,000 openings per year including replacements. Counts are rounded independently.
    • BLS lists no formal educational credential and short-term on-the-job training as typical preparation. Verify equipment scope, supervision and who can handle exceptions.

    Limitations:Employment and openings are rounded independently. Openings include replacements.

  • Named work exampleYangjiang Municipal Government|Mainland China|2026-09-21
    View original source:Named work example
    • A Yangjiang listing includes robot-assisted loading and unloading among one employer’s production duties. Ask which tasks the vacancy actually includes.

    Limitations:This case does not establish national pay, entry requirements or hiring.

  • Paper exerciseFermatMind|This page|This page
    View original source:Paper exercise
    • Inputs and results are fictional.

    Limitations:Checks the paper records only.

  • O*NET® 31.0 Core Task StatementsU.S. Department of Labor, Employment and Training Administration|United States|O*NET 31.0|Primary document
    View original source:O*NET® 31.0 Core Task Statements

    Limitations:Verbatim Core Task Statements excerpted from the O*NET® 31.0 Database, used under CC BY 4.0. U.S. occupational scope.

  • O*NET® database license · CC BY 4.0U.S. Department of Labor, Employment and Training Administration|United States|O*NET 31.0|Primary document
    View original source:O*NET® database license · CC BY 4.0

    Limitations:Verbatim Core Task Statements excerpted from the O*NET® 31.0 Database, used under CC BY 4.0. U.S. occupational scope.

O*NET describes the tasks, OEWS provides wage estimates, and BLS Table 1.2 provides employment projections.

Machine Feeders and Offbearers: Tasks, Pay and Training | FermatMind